HT4600 Just renamed my network and now the airport devices no longer appear on my itunes and can not see the airport on my airport utility?

help

What are the make & models of each of your routers in your current network configuration? Is the only thing you changed is the wireless network name? Which version of the AirPort Utility are you using?

Similar Messages

  • Is it possible to network Mac laptop with PC's. have three pc's wired to my network and can not see them on my laptop.

    Looking to see if it is possible to view my PC's on my MacPro. Have 3 PC's networked and was hoping to link laptop also, but can not seem to do it. Have WIFI and that is working. I am a novice at this. Please help.

    Hi Larry,
    It should be easy.
    I assume Sharing is setup on the PCs?
    Find IP on computers...
    http://www.helpdesk.umd.edu/topics/communication/ethernet/office/winxp/2882/
    On the Mac In finder, select Go menu>Connect to Servers, use the Browse button there, or..., type in the IP of a computer, like...
    smb://10.0.1.5
    smb://192.168.1.3

  • Just upgraded to Lion and can not use my QuarkXpress program.

    Just upgraded to Lion and can not use my QuarkXpress program.

    Your best bet is to check the version of QuarkXPress you have. Since Lion does not include Rosetta my guess is this may be why it is not working. Check out this site http://roaringapps.com/apps:table. This site has a list of apps that work and don't work under Mac OS X Lion.
    If you are working in a production environment freelance or stuido that uses design apps like QuarkXPress, Adobe InDesign, Illustrator, Photoshop you should always wait to upgrade your OS. We have a 3 to 6 month policy for upgrading computers and software.
    I hope the website helps.  http://roaringapps.com/apps:table
    Good Luck

  • Just purchased an iPhone5 and can not pair my Plantronics Voyager Pro HD.  I can't get a flashing red/blue signal light.

    Just purchased an iPhone5 and can not pair my Plantronics Voyager Pro HD.  I can't get a flashing red/blue signal light.

    Did you press and hold the power button until the LED flashes alternating red/blue - you may have to hold it for quite a few seconds.  If the LED is not flashing red/blue, then it is not in pairing mode, and I would then call Plantronics tech support as their manual has nothing else to offer (I have the same headset, but I had no problem pairing with my iPhone 5 when I upgraded from my iPhone 4).
    In the USA, call 1-866-363-2583 for Plantronics.

  • I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC.  I can however see my iPod touch under devices and sync it.  How can I get my iPad to show under devices and sync as well?

    I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC.  I can however see my iPod touch under devices and sync it.  How can I get my iPad to show under devices and sync as well?  I have also tried may suggestions on the apple support site and none have worked.  Any suggestions are welcome.

    You need iTunes version 11+.
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
     Cheers, Tom

  • How to increase the icons of creative cloude ? The icons permanecm very small and can not see properly.

    How to increase the icons of creative cloude ? The icons permanecm very small and can not see properly.

    Hold down Control and scroll down with the mouse or trackpad.
    Regards,
    Captfred
    That's the screen zoom function activated by CNTL scroll up to zoom and CNTL-Scroll down to unzoom.

  • I just download Bridge cc and can not open it.

    I just download Bridge cc and can not open it. I have Bridge Cs5. Ps cc opens with no problem. What can I do ??

    try to perform steps mentioned on below link
    http://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  • I can't hear the music on my IPOD 60Gig 5th generation and can not see my videos

    I can not hear the music, I can not see the videos on my IPOD 5th generation. I have restored it to the original settings and it still does not work.

    That's likely an indication or one or more hardware failures of the iPod. You'll want to get the iPod serviced in order to gain full functionality of it again or start saving for a new iPod.
    B-rock

  • TS1398 Can not connect to Wi Fi on my iPad Wi Fi is on and will connect to other devices IPad is searching for network and can not find a network I have reset device and nothing is working help

    Can not connect iPad 2 to wi fi IConnection works on other devices.  This device is searching and can not find Wi Fi to connect too

    It does connect at other Hot Spot locations.  At home and here at my office, I have At&t DSL & Wireless,Motorola 3347 Router.  Computers hook right up to wireless with no problem, I just can't get ipad to connect.  Password is rejected.  Thanks for you quick response, I am not very computer litterate and this is driving me crazy.  Thanks again
    Mike

  • Volume setting used to be displayed on window that has disapeared and can not see volume setting or

    on pavilian dv8 the volume setting is touch and slide and used to show up on window as a slide bar but that window no longer appears up so i can not see volume setting how do i get it back

    Hi,
    Use Recovery Manager to reinstall HP MediaSmart SmartMenu - using recovery manager to reinstall drivers and software is described further in the document on the link below.
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01868333&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US​...
    After the reinstallation has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Onedrive renames library folder and can not be reverted

    Hi, I have been trying to reverse the effect of moving the OneDrive folder into a new location. I somehow chose the Documents folder under Libraries, and now the it has been renamed to OneDrive and I cannot access my documents and I dont know where to
    actually find it anymore... I have disabled OneDrive to see if that takes any effect but it is still named Onedrive not Documents... PLEASE SOMEONE HALLPPPP.... 

    Hi,
    Before you move the OneDrive to the document folder, there should be a warning,"if you proceed with redirection you will not be able to separate them or restore default location", after a test, the result is as below:
    Even we try to restore the location, it is not working, I am afraid it is not retrived any more.
    Regards
    Wade Liu
    TechNet Community Support

  • I can not wake the Lion and can not see the Snow Leopard

    Hello,
    I have a (White) 2007 MacBook, with a new 640 GB HD.
    It has 2 partitions: a 40 GB running Snow Leopard ( I am a teacher and have no time - and desire - to substitute my AppleWorks DBs  until this year ends) and a 600 GB running Lion.
    I have an AIM mail account but I can´t use Mail, because I never know if the message was sended or not; AOL said that my configurations are right and that the problem is with their servers, but they not returned the solution.
    So, yesterday I was answering an e-mail message in my journaling application, using Journler 2.6 for Lion. I copied an word from the message I got and pasted in my reply. I highlighted the word to change the font to Georgia.
    Then, something strange happened: the word Georgia became attached to that arrow that I use to click to activate anything. Nothing was responding. I had to Force Quit the Journler.app and all the other apps that were in the background.  Even the OS.
    1) When I started the MacBook again, obviously came the last partition used: Lion. It showed the 2 accounts for that partition, i.e. the Administrator account and mine. I clicked on mine and nothing happened, I tried the Administrator account and nothing happened.
    2) I inserted the disc I burned with the Lion OS, holding the C key: the MacBook rejected; I inserted the disc of Snow Leopard that I bought from Apple: it was rejected either.
    3) I tried to access the MacBook through a Cube running Tiger. I saw both partitions but I could not do what I intended to, that is, change the startup disk to Snow Leopard.
    4) I returned to the MacBook and I got a surprise: I could log in my account. But I only could see the apps in the dock, I was unable to open any of them.
    5) I tried several other times yesterday and today with no success.
    Of course that I want my Lion back; but now the more important to me is to get my MacBook running  my  Snow Leopard account. I register all the data of my students - presences, absences and grades - directly on an AppleWorks DB file.
    So, the big question is: how do I change the startup disk to Snow Leopard?.
    My resources are: 1 iMac 800 MHz running Tiger; 1 Cube 450 MHz running Tiger; 1 FireWire cable (to access the MacBook in the Target Mode, which I will try next); 1 iPhone 3G and a never used 8 GB pen drive. There is a MacBook Pro running Snow Leopard, that is not at home now but eventually could come today, I am not counting on this. It was bought in september of 2009 and I am not sure if it has a FireWire port.
    I thank you for any help.
    Best regards,
    Jorge Lucas ( the guy from Rio Grande do Sul)

    I am using mobilme now, it's working good.
    No doubt Icloud is better and a mindless method.
    My only problem is that I won't be able to use Icloud with mine 2 computers.
    1 is update with Lion, the onther one is with SL,  cause it's a CORE DUAL (no update possible!).
    So that's my problem, buying a new one or never be able to synchronize after june 2012.....

  • Version 22 operating on Windows XP continuously crashes; CPU surges and can not see the Firefox Health Report (all boxes checked and share data on)???

    Not sure how much clearer I can be.
    Windows XP version 5.1 with Service Pack 3
    Firefox Version 22
    Can not view Firefox Health Report even thou all selections are made for this to happen
    I share data with Mozilla

    If Firefox is crashing we need the Crash IDs that are obtainable from ''about:crashes''. The crash IDs start with ''bp-''
    Standard reply:
    We're sorry to hear that Firefox is crashing. In order to assist you better, please follow the steps below to provide us crash ID's to help us learn more about your crash.
    #Enter about:crashes in the address bar (that's where you enter your website URL) and press Enter. You should now see a list of submitted crash reports.
    #Copy the 5 most recent crash ID's that you see in the crash report window and paste them into your response here.
    Thank you for your help!
    More information and further troubleshooting steps can be found in the [[Firefox crashes]] article.

  • I bought 2 app store cards and can not see the code on them

    i can not redeem my 2 $25 cards because i can't see the codes

    Invalid, inactive, or illegible codes
    http://support.apple.com/kb/TS1292

  • Just upgraded to Leopard and can't see individual photos in Finder

    I have just upgraded my late-2007 iMac to Leopard and dragged and dropped my photo library from a back-up disc. iPhoto can use it but the individual photos aren't available to browse in the Finder...
    Nor can I select an individual photo when I try to add one as an attachment in Mail- I only see the Library file as one big 6GB file.
    What can I do?

    but that's a very complicated way of doing it...
    So access the photos using the Photos button in the message window in Mail or use one, some or all of these
    There are many, many ways to access your files in iPhoto:
    For 10.5 users: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. If you're using Gmail you can use THIS
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    Or, if you want to access the files with iPhoto not running, then create a Media Browser using Automator (takes about 10 seconds) or use THIS
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    Regards
    TD

Maybe you are looking for

  • How can I select from drop-down list and jumping to selected subform?

    I using LC Designer ES2 vers 9. Developing XDP. How can I Select from a drop-down list the appropriate selected subform (jumping to the selected subform on the page)? drop-down list...A (jump to subform1)                          B (jump to subform2)

  • Text messages and Calls failing

    I recently bought a 4s and upgraded to the new iOS. Starting last week my text messages and outgoing callas are failing, but I have a strong signal. I've talked to att, who have checked my phone, the coverage in my area, and replaced my sim card. I'm

  • Can't download Help in Captivate 5

    I cannot open any help files.  I have uninstalled and reinstalled the Help application twice.  It doesn't think I am connected to the internet, but I am.  The Captivate help file is showing pending download and I can't get it to update no matter what

  • Wage type amounts in cluster PCL4

    Hi all, I am trying to capture the wage type amount changes in infotype logging. enables infotype logging. Used function module 'HR_INFOTYPE_LOG_GET_LIST' and HR_INFOTYPE_LOG_GET_DETAIL to retrieve the change data. So far so fine. But the structuer r

  • Quicktime not loading AVI and MKV files. Some other apps also not working..

    Hi guys Hope you can help out with this one. Lately my iMac has not seemingly been able to play AVI or MKV files within Quicktime as well as another Application that I use called Elmedia Player (excellent app when it works). However Elmedia Player se