HT4623 After I update IOS6 for my iphone 3gs, while i turn on vibrate (Using side button) is not supporting. Automaticlaly tur.n on ring mode. So please help me to resolve this issue.

After I update IOS6 for my iphone 3gs, while i turn on vibrate (Using side button) is not supporting. Automaticlaly turn on back to ringing mode. So please help me to resolve this issue.

No one facing this issue in 3GS? please help me.

Similar Messages

My iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist, my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist

my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist, my iphone4 camera shutter not opening please help me to resolve this issue , i tried a restore it still exist ,please help me

uninstall all iTunes,5 programes,this worked for me after reinstall them

Can you please help me how resolved this issue.

Hi Experts
I am trying to connect LDAP by R/3 system. R/3 system connected to LDAP but when I am trying to find and pull the fileds in the "Find in the Directolry" option I am getting below error.
LDAPRC 010 another server is referenced.
Can you please help me how resolved this issue.
With Regards,
Trinadh Bokka

You may be able to solve by using
Note 1151329 - Depth of LDAP search is only one level below the base entry
Markus

My itouch 3g is stuck in a boot loop. The apple logo shows up for about 3 seconds and then turns off. I can't get it to go into dfu or recovery mode. Please Help!

I don't know what to do.

This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore

HT201066 HI, quick time plug is cutting off mpeg4 vedios on its edges in internet explorer. please help us to resolve this issue.

HI,
IN our application, We are uisng quicktime plug in to play MPEG4 vedios. But in internet explorer, the vedios are not fitting into the quicktime plug in. The edges of vedio is getting cut off (like vedio is bigger than quicktime window..). Please let me know how to fix this.
thanks,
Veena

HI,
actually the vedio works fine if we play from our machine. The issue is happening only when we are trying play online. Please see the below link to reproduce the issue (please click on play button which will appear in below page.)
http://h20324.www2.hp.com/SDP/Content/ContentDetails.aspx?ID=3666

Using NI LabVIEW PID.vi to control 4 quadrant dc power supply in MOKE application; but the Process Variable won't achieving Zero Set Point, oscillating either side of zero instead !! Please help me to resolve this issue

Please see the image also where the PID values can be seen.
Thank You

Hi Aruvi,
PID controls are made for linear systems. When your system acts nonlinear you need to use a different control algorithm - or adapt your PID to use different PID parameters depending on system workpoint!
In the PID toolkit you will find a GainSchedule function that helps you in this matter…
And PLEASE put more text in the message body and (much) less in the topic title!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

While updating iphone software to 5.0.1, I am getting error message that Iphone cound not be updated because the firmware file is not compatible. Can anyone help me to resolve this issue.

While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
Can anyone help me to resolve this issue.

Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
First did a full back up of iphone using iTunes
Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
Disconnected USB cable from iphone
Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
Pressed and kept holding Home button while plugging cable back into phone
I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
Recovery Mode alert came up in iTunes.
Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
iphone did not appear in iTunes due to missing pairing file (that made me nervous)
iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
Eventually the iphone asked if I wanted to restore from a back-up (whew!)
A window opened in iTunes and I was able to select my previous back-up file for the restore
A full restore from back-up then occured
I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
When the restore was done I had to re-enter some passwords, but everything was there
iOS is now 5.0.1 (9A406). The whole process took about an hour.

My ipad air getting close all apps automatically within seconds while connecting wifi. This issue is started after the updation of the iSO 8, Please help me to rectify this issue.

Hi,
My ipad air getting close all apps automatically within seconds while connecting wifi. This issue is started after the updation of the iSO 8, Please help me to rectify this issue.
Expecting some quick solution in this regard,
Thanks
Prabhu

(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

I get ios6 for my iphone 3gs but I cannot activation it and now I cannot use the phone

I get ios6 for my iphone 3gs but I cannot activation it and now I cannot use the phone

I saw a message on screen : the activation server is temporarily not in use, the iPhone not activated.
Try connecting your iPhone to iTunes to activate it or after a few minutes and try again.

Error searching for from role provider Microsoft.Office.Server.Security.LdapProviderException: Unexpected exception occurred, please contact administrator to resolve this issue.

Hi,
I am trying to configure FBA with ADLDS on SharePoint 2013 Enterprise.
I have edited, web.config files for Central Admin, Security Token Application and Claim aware WebApplication.
<PeoplePickerWildcards>
<clear />
<add key="XXPROVIDERMP" value="%" />
<add key="XXPROVIDERRM" value="%" />
<add key="AspNetSqlMembershipProvider" value="%" />
</PeoplePickerWildcards>
<membership defaultProvider="i">
<providers>
<add name="i" type="Microsoft.SharePoint.Administration.Claims.SPClaimsAuthMembershipProvider, Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
<add name="XXPROVIDERMP" type="Microsoft.Office.Server.Security.LdapMembershipProvider, Microsoft.Office.Server, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71E9BCE111E9429C" server="CSERVER" port="389" useSSL="false" userDNAttribute="distinguishedName" userNameAttribute="userPrincipalName" userContainer="CN=Clients,CN=Extranet,DC=XXDCNAME,DC=dmz" userObjectClass="person" userFilter="(|(ObjectCategory=group)(ObjectClass=person))" scope="Subtree" otherRequiredUserAttributes="sn,givenname,cn" />
</providers>
</membership>
<roleManager defaultProvider="c" enabled="true" cacheRolesInCookie="false">
<providers>
<add name="c" type="Microsoft.SharePoint.Administration.Claims.SPClaimsAuthRoleProvider, Microsoft.SharePoint, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
<add name="XXPROVIDERRM" type="Microsoft.Office.Server.Security.LdapRoleProvider, Microsoft.Office.Server, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71E9BCE111E9429C" server="CSERVER" port="389" useSSL="false" groupContainer="CN=Clients,CN=Extranet,DC=XXDCNAME,DC=dmz" groupNameAttribute="cn" groupMemberAttribute="member" userNameAttribute="userPrincipalName" dnAttribute="distinguishedName" groupFilter="(ObjectClass=group)" scope="Subtree" />
</providers>
</roleManager>
When I am trying to find user in People Picker, getting error
Error searching for "XXUSER"from role provider "XXPROVIDERNAME" Microsoft.Office.Server.Security.LdapProviderException: Unexpected exception occurred, please contact administrator to resolve this issue.
Has someone else faced this issue?

Figured it !
Account which was accessing FBA didn't had permission on it.

HT203196 My macbook air 13inch got shutdown 3 times by itself. I tried installing SMC package as suggested but my computer is telling the update is not required. Could you please help me on fixing this issue. Thanks.

My macbook air 13inch got shutdown 3 times by itself. I tried installing SMC package as suggested but my computer is telling the update is not required. Could you please help me on fixing this issue. Thanks.

What version of OS X are you using? Exactly which MBA model do you have?

TS3694 I couldn't be update my iphone. An unknown error occurred (6). Please help me to resolve this problem.

I could not be updated my iphone4. An unknown error is occurred(6). please help me to resolve this problem

Errors related to third-party security software
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or phobos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer.

Is 4.3.3 the new updated software for the iphone 3gs?

is 4.3.3 the new updated software for the iphone 3gs?

No. The post you responded to is nearly 7 months old. At the time, 4.3.3 was the most current version for the 3GS. As of now, 5.0.1 is the most current version for the 3GS.

TS1363 My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue?

My iPod Nano 7th Generation couldn't be detected by iTunes when I plugged in. I tried resolving the issue by uninstalling the iTunes and then install it back again but yet still the same problem exist. Can you please help me to solve this issue? I have already updated to the latest version of iTunes on my Windows 8 and I cannot synchronize my iPod for the time being. Please do help me to solve this problem. Thank You.

uninstall all iTunes,5 programes,this worked for me after reinstall them

When I make a call or recieve a call, the voice of the other person is not heard. but speaker phone works. what could be the trouble. could you please help me in resolving this? iPhone 4, iOS 6.1.3

when I make a call or recieve a call, the voice of the other person is not heard. but speaker phone works. what could be the trouble. could you please help me in resolving this? iPhone 4, iOS 6.1.3.i had purchased my iphone 4 factory unlocked from usa last month.i am from india so will any apple service centre help me for this issue?

They will help you just make sure that you make a appointment before you go into the store. Also if the iPhone needs to be replaced and you are not within your year of hardware coverage, that is when they will ask you to pay a fee.

HT4623 After I update IOS6 for my iphone 3gs, while i turn on vibrate (Using side button) is not supporting. Automaticlaly tur.n on ring mode. So please help me to resolve this issue.

Similar Messages

Maybe you are looking for