HT4623 after installing ios on my ipad, its showing a display to plug into itunes. i cant operate my ipad. what happened?

can anybody help me?

i have same problem....even connected to itunes using laptop also not function.
now my ipad not charging.

Similar Messages

  • Why after installing iOS 7 my iPad started to reboot by itself, my battery lost autonomy and the iPad got slowwwwwwer?

    Why after installing iOS 7 my iPad started to reboot by itself, my battery lost autonomy and the iPad got slowwwwwwer?

    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    From Here  >  http://www.apple.com/batteries/ipad.html

  • After installing iOS 5, my ipad 2 will not accept my access code and has locked me out

    after installing iOS 5, my ipad 2 will not accept my access code and has locked me out.  Any ideas?

    I don't know if your symptoms are the same as mine, but my problem is the same. Specifically:
    My update seemed to go fine, but I noticed that items in Notification Center were not current or missing, as compared to the iPhone. Also, when iTunes saw the iPad without it being connected by cable, the portion of the iTunes screen that displayed the OS status was blank, and it told me that I had to connect physically to update. When I did, iTunes confirmed that iOS 5 was indeed installed and current.
    With this, I decided to shut down the iPad completely, and restart it. When it came back up, the lock screen had changed. I now get a full keyboard (not just a number pad). When I attempt to enter my 4-digit passcode (and I know I'm entering the correctone), the iPad won't take it. Now it's completely locked and I can't access it.
    The odd thing is the way the screen changed to display a full keyboard on the lock screen. This didn't happen to the iPhone.
    All devices are running the current versions of everything.

  • After running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened??

    I was running the newest version of Snow Leopard, and after running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened?
    I really regret that I said "OK" to Software Update message... after Software Update of these updates on 7-26-11:
    Migration Assistant Update for Mac
    Mac OSX 10.6.8 Supplemental Update
    Safari
    iTunes
    Remote Desktop Client Update
    Now I get a message:
    iTunes cannot be opened because of a problem
    Check with developer to make sure iTunes works with this version of Mac OSX. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OSX.
    Process:         iTunes [5092]
    Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier:      com.apple.iTunes
    Version:         ??? (???)
    Build Info:      iTunes-10315501~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [111]
    Date/Time:       2011-07-26 12:08:18.568 -0500
    OS Version:      Mac OS X 10.6.8 (10K540)
    Report Version:  6
    Interval Since Last Report:          504736 sec
    Crashes Since Last Report:           20
    Per-App Crashes Since Last Report:   13
    Anonymous UUID:                      B8B5EE28-970A-4E79-949B-EA2DD6E6DAA2
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread:  0
    Dyld Error Message:
      Library not loaded: @loader_path/libgnsdk_musicid.1.8.2.dylib
      Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
      Reason: image not found
    Binary Images:
    0x8fe00000 - 0x8fe4162b  dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
    Model: Macmini3,1, BootROM MM31.00AD.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 2 GB, SMC 1.35f1
    Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
    Memory Module: global_name
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.131.42.4)
    Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: Hitachi HTS543216L9SA02, 149.05 GB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: External HDD, 0x1058  (Western Digital Technologies, Inc.), 0x0704, 0x24100000 / 2
    USB Device: Hub, 0x0424  (SMSC), 0x2507, 0x26400000 / 2
    USB Device: iMic USB audio system, 0x077d, 0x07af, 0x26440000 / 4
    USB Device: Hub, 0x0424  (SMSC), 0x2502, 0x26470000 / 3
    USB Device: Deskjet D4300 series, 0x03f0  (Hewlett Packard), 0x1f04, 0x26471000 / 5
    USB Device: GD-0608-U, 0x056a  (WACOM Co., Ltd.), 0x0021, 0x04700000 / 4
    USB Device: IR Receiver, 0x05ac  (Apple Inc.), 0x8242, 0x04500000 / 3
    USB Device: Hub in Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x1003, 0x04300000 / 2
    USB Device: Apple Optical USB Mouse, 0x05ac  (Apple Inc.), 0x0307, 0x04310000 / 6
    USB Device: Apple Pro Keyboard, 0x05ac  (Apple Inc.), 0x020b, 0x04330000 / 5
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06100000 / 2
    USB Device: Bluetooth USB Host Controller, 0x05ac  (Apple Inc.), 0x8216, 0x06110000 / 5
    FireWire Device: unknown_device, Unknown
    FireWire Device: d2 DVDRW FW, LaCie, Up to 400 Mb/sec

    Same thing happened to me and I get the same error message. These are the programs that don't work
    mail
    keynote
    pages
    all Office 2011 programs
    safari

  • HT4623 After installing IOS 6.1.3 I am now unable to install any app.  I hit the "install" it asks me for my password and then is goes back to install.

    After install iOS 6.1.3 everytime I attempt to install any app, I hit "install", it aks me for my password and then clocks for a couple of secs and then goes back to "install" without installing.

    Have you tried a soft reset? Hold down the home and lock buttons until you see the apple icon appaer then let go. If this doesnt work, open iTunes, conect the handset to the computer and do a full restore.
    Hope this helps.

  • Please Help: Attempted install of new IOS 7 for iPhone - cell then requested to be plugged into iTunes - told it was in recovery mode - tried to restore - got error 4013

    After attempting to install the new update, my iPhone is requesting to be pugged into iTunes. On the screen is a picture of iTunes and a cord. When I plug it into my MacBook air it will no recognzie it - though it did so in the past. I attempted a number, if not all, suggested I could find posted but nohting worked. As per one reconmondation, I have attempted to plug it into my PC (Which I don't use often - so I had to do all the updates). My PC recognized the phone and said that my phone was in recovery mode. So, I allowed iTunes to do its thing - iTunes said it was installing updates and recovering the phone (which took about an hour). When it was done, iTunes informed me that the phone needed recovery. So, I clicked recovery. It went through its thing then popped up with an error message 4013. When I requestion further information (button on the bottom), it opens a blank workd document (not really sure what that is about). After the error message, I reset the compuer and plugged it back in. Clicked the restore button but I received the same error message again.
    I have also tried to plug it back into my Mac but still no luck.
    On both my Mac and PC I have
    - Done all the update to both software and iTunes,
    - Reset the computer (multiple times)
    - reset the phone - but the picure of iTunes and cord remains
    - tried different cords
    - disabled my security settings
    - tried different USB ports
    I am at a loss. This is my only phone so I am unable to call apple support. Plus I live in a small town, so there are no apple aproved stores near by.
    Thank you in advance for your help

    Spent hours trying everything suggested and finally this morning hit on a solution. iTunes must be run as an administrator. Even though you are logged into your PC as an administrator, using the iTunes shortcut does not make you an administrator in iTunes. I found this out by using the diagnostics in iTunes and reading through the results report.
    I am using Windows 7, so I clicked the start button and right clicked on iTunes and selected "Run as an adimistrator". The first restore attempt got the 4013 error. I then did the DFU thing, hold power and home buttons for 10 seconds, release power and continue holding home for 10 more seconds.
    iTunes gave me the restore message and I clicked it. I clicked the restore iPhone button and it started. The drivers loaded a couple of times. I got the apple logo with the progress bar and this time instead of disappearing, it started to fill in.
    End result, a successful restore to factory settings and a happy 14 year old.
    Hope this helps others.

  • HT4623 After installing iOS 7 my microphone isn't working. No recording , no one can hear me on Skype

    After installing ios7 my microphone isn't working.  No one can hear me on Skype.  Recording device arnt working too.  I rebooted the device as well downloaded Skype again.   Please help me

    A restore will not work either.  I went to the Apple genius bar and they did everything, but nothing worked.  "It is your hardware".   No, it is not.  It is Apple's IOS 7 software that was not properly coded/tested before they released it.  Now they will not own up to the problem.  There are too many people with the same issue that suddenly happened after the IOS 7 install.  Come on, Apple.  Fix this!  These are expensive devices and many of us will not buy another iPad if we run a risk like this.

  • HT1414 After installing ios 7, my ipad 2 is taking a long time to charge, like 8 hours and not holding the charge. Help

    After installing IOS7 on my IPad2, it takes a very long time to charge and does not hold the charge. Should I uninstall IOS7, how do you do that? HELP!!

    Do you have the cover on your ipad? If so you may need to go into settings>General and turn on lock/ unlock so that it goes into standby when cover is closed. Not sure this is your problem but it was why my battery didn't last long. As far as long charge time goes I have noticed it is taking longer to charge also. Hope they fix some of these bugs in the first update.

  • HT4623 After trying to update, my phone will only show that i should plug into itunes?  What should I do?

    Why is my phone stuck after downloading the newest update?

    Most intelligent people would plug the device into the computer running iTunes as suggested on the screen and follow the on-screen prompts.

  • I tried to download IOS 7 but my pc said failed to install and now my ipod 5g gives a message to plug into itunes. I have pluged in but it wont recognize my ipod and the message is still there

    please help

    Apple's servers are slammed right now with iOS 7 downloads AND activation requests.
    Be patient and try again later.

  • HT4623 on the screen of my phone its showing a usb cable attaching to iTunes,ive done this and it wont update and the phone wont move from this screen,please help

    my phone is showing a cable connecting to itunes and wont do anything else,i have done what it implies but nothing is happening,please help (iphone 4)

    You will have to restore using itunes.... if that doesn't work, try entering dfu mode before restoring

  • HT4059 Internal Dictionary stoped working for IPAD2 after installing IOS 6 - Country Bahrain.

    Internal dictionary for IBook stopped working after installing IOS 6 in Ipad 2, my country is Bahrain, it is working with IOS 5. App Store also not responding some time, tried all the way but no luck any ideas to get the dictionary back.

    6708 line card could be faulty.  Read THIS.

  • Battery life run out faster after install ios 7

    please help the battery life run out faster after install ios 7 and signal strengh show only 2 bar in my house after install ios 7 too.
    thanks

    Try this out: http://helpios7.com/ios-7-battery-issues/

  • Iphone 5 stuck on plug into itunes after battery was depleted

    Just got the iphone 5 on Dec 23, 2012 today it died on me(first time since I got it) and when I went to plug it in, it seemed like after 5 min or so it was going to come back on but, instead it would just flash the apple Logo and turn back off, i went ahead and hard reseted the phone and thats when it went into recovery mode and displayed the plug into itunes screen , now its stuck there and recover/restore fails with a code 21. and wont go anywhere from there Note: i have tried on 5 different PC's now with no luck. Heeeeeeelp!!!

    Place the device in DFU mode (google it) and restore.
    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.

  • HT4623 tried to update iph. now wanted me to plug into itunes, fine i did, but now telling me it want to restore to factory settings & lose my stuff. i have Icloud just not sure when last back up was i dont wanna lose my stuff how do i stop this so i can

    how can i get my ph usage back? Its locked up in the "plug into itunes" screen & wont let me get out. telling me on itunes that its going to restore to factory setting. I dont want to lose my new pics etc... so how do i back out of this so i can double chk my icoud back up?

    If you are trying to say that when you connect to iTunes on your computer your Device is not appearing.... Then...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    After the successful Recovery...
    Restore from Backup
    http://support.apple.com/kb/ht1766

Maybe you are looking for