HT4623 After trying to update, my phone will only show that i should plug into itunes? What should I do?
Why is my phone stuck after downloading the newest update?
Most intelligent people would plug the device into the computer running iTunes as suggested on the screen and follow the on-screen prompts.
Similar Messages
-
my phone wil not turn on after trying to update now all it de si tell me to plug into itunes which i have ready done and still nothing happens can you help
Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time.
-
HT201263 My phone will only work if it is plugged into the wall charger.
I tried to reset my phone by pushing the home and top button and the "plug into iTUNES" message came on. But when i unplug my phone from the wall to plug it into my computer it shuts off. When i plug it into the computer the apple icon just flashes on my phone. When my phone is turned on it says "searching" the whole time and will not let me place phone calls access the internet listen to music or anything.. PLEASE HELP !!!
I had AT&T with the same issue so i switched to Verzion and it was a very quick fix to my supprise.
I am from Cambodia but i live in Mobile, Alabama. -
HT4623 After trying to update my phone just says itunes and will not turn on
Tried to install update to 5C and it just says Itunes in the middle of the screen. Cannot turn it on or off...stuck need help
It is in Recovery Mode. Connect to the computer and iTunes and follow this support document. http://support.apple.com/kb/ht1808
-
I am running Facebook and leaving it on..when I come back to it or sometimes when i am using it i get this Unresponsive Script Error - Script: chrome://greasemonkey/content/prefmanager.js:55. If i click continue or stop it will go away but many times the page is frozen so i have to restart Firefox. I am not using Chrome so i am surprised about that part of the error. I have read the other posting and have tried to change the time under config......can't remember the rest and it has not worked. Please advise what else i can do.
In Firefox the use of the term chrome refers to the user interface and other elements that are not part of the web pages.
See https://developer.mozilla.org/en/Chrome
Your problems seems to be caused by the GreaseMonkey extension.<br />
See [[Troubleshooting extensions and themes]] -
After syncing and updating my phone froze-just shows the apple on the screen and a line under it
After syncing and updating my iphone froze-only shows the apple on the screen. PLease help!
See if you can reset the phone by holding the sleep and home button until the Apple logo comes back again.
If this does not work, try to connect in recovery mode, shown here: iPhone and iPod touch: Unable to restore -
My iphone asked if I wanted to update and I hit yes. It said to plug into ITunes so I did. My only option is to "restore". It didn't ask if I want to backup first. I don't have service on phone and I don't want to restore. How can I go back to "not" restoring?
You have to restore it
-
My ipod touch has frozen! Will only show a USB cord pointing to "itunes" CD symbol. When I try to plug it in, my computer says that it cannot recognize my device due to malfunction. Tried to reset the ipod twice, but didnt change anything.
- Try another cable as yu siad
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My phone started resetting today over and over and then shows the icon to plug into itunes. When I tried plugging in, a message pops up saying that itunes can't connect because my phone has a passcode and i need to unlock it to connect. my phone won't let me do anything more than make an emergency call. it wont give me the option to enter my passcode to unlock the phone. What can I do?
After a visit to the apple store, they were able to get through my pass code but unfortunately I found out that is was a problem with the logic board. Since Apple only wants to sell and not fix, I was able to locate an iphone repair near me that deals with logic boards and they are currently working on it right now. i should be getting it back soon. Im not sure if the problem you are experiencing is the same as i went through but it does sound like it may be also a hardware issue and would suggest searching online for an iphone repair place that can diagnose what exactly is wrong. Hope this helps.
-
I updated my iphone4 and now it won't do anything it just tells me to plug into itunes what do I do
Hello h4davis,
Thank you for the details of the issue you are experiencing after updating your iPhone. If you have not resolved the issue, I recommend following the steps in the article below for an issue like this:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I have been given an Apple 3G which is in jailbreak. After restoring and updating my phone to get rid of jailbreak the iphone will not accept any updates or restoration. Unknown error 1015. Please help! I am new to all this and want to start using the phone legitimately.
I believe from the situation you describe your iPhone 3g has the iPAD baseband 6.15.00 which is interfering with iTunes. Remember Apple does not allow downgrade of software typically. The current 3g firmware 4.2.1 has a baseband 5.15.04 which is lower than, what I believe your baseband is of 6.15.00. So to install the current 3g firmware 4.2.1 would actually be a baseband downgrade, which iTunes will not allow. So to fix your iPhone you will have to search the Web like diesel vdub said. There are no parts to buy and your iPhone will work again I promise.
-
I tried to update my phone this morning, and now it is stuck on a black screen with an apple in the middle.
Press the Power button and hold it down until the computer turns off. Restart. Do you still get the same result? If so, then try booting into Safe Mode, then restart normally. A safe mode startup takes considerably longer than a normal one, so don't panic. You will also see a progress bar at the beginning.
-
HT4623 i tried to update my phone and it doesn't work.
i tried to update my phone and it doesn't work. Tried restoring from DFU, and other things. I got error message 3194 and have also gotten "this device isn't eligible for the requested build" What do i try now?
If it's stuck on the Apple logo, you'll have to force it into recovery mode and restore it. See http://support.apple.com/kb/ht1808.
-
hi there i wonder if anyone can help me im trying to update my phone to the new software 7.2 an it says its downloaded but then doesnt rebot my phone to complete the update it just says there an error an throws me out !! any help on this ?
gemsmobiletans wrote:
my phone does not have software update option on it.
If you have iOS 4... See Here...
http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch
Make sure you have the Latest Version of iTunes Installed
iTunes free download from www.itunes.com/download
Note:
The Current iOS for the iPhone 4s is iOS 7. -
While trying to update my phone one photo is stopping the whole process and I've gone through all the online suggestions (check for updates,etc)
Verizon was having a problem on their end, perhaps a server down for some repair or updating. However you were already aware that there was an on-going problem in your own posting and you decided to continue on.I can understand you wanting this done and trying to save the $15.00 fee. However I would have waited a bit longer until the Verizon issue had been corrected. Yes it is frustrating but again you know in advance of a problem , I can understand that this is most upsetting for you but never try to perform any change when a problem is there and I also do not like to do business on a weekend with no live tech support available. I'm sure this will all work out for you if given some time. Sorry.
So I have been trying to change my phone number for a few days now and every single time I get this error message, before i even start, "The activity you are trying to perform is currently unavailable. Please try again later."
Maybe you are looking for
-
I change the language on my ipod and most of my songs were gone, how do i get them back?
Ok so, today i had the brightest idea to change the language on my ipod, after that of course i wanted to listen to some music and most of my music dissapeared, i thought that changing the language back to english was gonna be the solution but it was
-
No Matching Record Found 'WithHolding Tax' (OWHT) ODBC-2028
Hello Experts, while making a PO I am getting this error mentioned above. Help Required ... Thanks
-
Hi Experts, On the ADS have been tested for 944221 without a note of paragraph 6 "Generated PDF with additional information". ADS is working locally. But on the another server occurs errors "ADS-error: com.adobe.ProcessingException: Problem accessing
-
Macbook Pro 4,1 trackpad right-click
I have an early 2008 macbook pro (Macbook Pro 4,1). In Lion, the only way to right-click is using ctrl+click. If I select "Secondary click" in System Preferences/Trackpad, it gets automatically un-selected when I exit System Preferences. This is very
-
.mts files and compressor settings
Hello, I need some help using final cut pro! I recorded some footage on a Canon HG20 camera onto an SD card. I then transferred the footage with showed up as .mts files from the SD card onto my macbook. My first question is why can't I open .mts file