HT4623 al querer actualizar el software de ios 7.1.1 en el ipad me pide un código que no sé cuál es
Me PIDE UN Actualizar Código párrafo el software y desc
The code should be the four digit code you unlock your iPad with.
Similar Messages
-
I do not like the new iOS 7 system on both my iPad 2 and iPhone 4S. I can not like the way Safari works, I can not see a way to enter name to search for new web sites. Is there a way I can go back to the old iOS 6.1.5 operating system on my devices? Thank you.
I can not see a way to enter name to search for new web sites
Put your search terms in the combined URL and search bar at the top of the browser (exactly the same as you do in most modern desktop browsers such as Chrome, Safari, Explorer). There is no separate search box, just use the box where you enter web addresses.
And no, you cannot downgrade. -
I just bought my iPhone 4s last April 29, 2014 and have the iOS 7 preset software but then I fully charge the phone and after couple of ours the battery is empty, at first I was shocked since this is a new phone and apple products are known for having a long battery life, so I've done my research then there's a new update which is iOS7.1.1, so I updated my phone's software since it fixes "battery problem" but then I am still suffering for having a shorter battery life. I am very dissapointed having this problem, i have an ipad but i didnt experience such problem. Please help me to have this problem resolve so that I can enjoy my new phone. Thanks!
Thank you for your quick answer. I happen to have a brand new cable (orignal), I just syncronized my other phone and it worked just fine. At least I know is not the cable or the connection. It keeps showing the same error.
Also there's no way I can turned off I try to reset it but the apple keeps poping up. -
HT4623 phone hanging mode after software updation, ios 6.1.2
hi, today i try to update (6.1.2) my i phone 4S through itunes from my Laptop, after updation completed i got one error msg. then my phone not working, i cant switch off mobile, it is hanging mode, why it is like that? Tojo Dubai
What error message did you see?
This Apple doc is a good place to start with update/restore problems -> iOS: Resolving update and restore alert messages -
HT4623 I don't have software update option in the general folder in iPad 2
How to upgrade iPad 2 version to ios5
See the chart below to determine whether you can upgrade your device and what you can upgrade to.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1
iPhone 4 iOS 6.1
iPhone 4S iOS 6.1
iPhone 5 iOS 6.1
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1
iPod Touch 5 iOS 6.1
iPad 1 iOS 5.1.1
iPad 2 iOS 6.1
iPad 3 iOS 6.1
iPad 4 iOS 6.1
iPad Mini iOS 6.1
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
what do I need to do here
Hey Snuggle63!
I have an article for you regarding this issue with your ability to upgrade your iOS device:
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/TS1275
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
Trato de actualizar mi iPod pero me pide un código. Que código necesito?
Trato de actualizar mi iPod pero me pide un código que código necesito
Google translate:
I try to update my iPod but calls me a code need code
Maybe this:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
or
iCloud: Find My iPhone Activation Lock in iOS 7 -
HT201412 por favor no puedo actualizar mi software ios 6.0.1
por favor porque no puedo actualizar mi software
por favor necesito actualizar mi software ios 6.0.1 y no me deja hacerlo diganme que puedo hacer
-
HT4623 Como actualizar el software del IPAD, cuando te manda error?
Como actualizar el software del IPAD, cuando te manda error?
The Settings > General > Software Update option only appears when you have iOS 5+ installed, as you have iOS 4 then you will need to do the update via your computer's iTunes as described half-way down the page that you posted from.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Devices > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand sidebar of iTunes and selecting 'Backup' (on iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC)
Then start the update by selecting the iPad on the left-hand sidebar, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
An iPad 2 will be updated to iOS 6.1.3 -
Just updated iPhone 5 software to iOS 6.0.2, and now unable to connect to Wireless (TWC). Anybody know the secret?
Contact your cellular carrier. I found this guide to all cellular carrier contacts from Apple:
http://support.apple.com/kb/HT1937
... but I have to say I did not find TWC in there. I hope you know how to contact them. -
I started to update my iphone4 software to iOS 7.0.4 while in the process of updating a text message came in- now it keeps saying checking for update then an error comes up that says try again . How do I finish updating my phone?
Hi
A little information will be of a great help, witch iPhone did you upgrade, memory , and version of software ( iOS 8.x.x )?
Try restarting you iPhone and make sure you have a god internet connection , get as close to your wifi router (1-3 meter / 2-9 feet ) as possible. Don't use restore to factory settings before you tried other options . And most imported du you have an iCloud backup.
//Sorenc -
I plan to upgrde my itouch's software, some says i would see software update at the settings,general but i saw nothing. Is there any other way to upgrade my itouch to ios 5?
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
A 1G iPod can go to iOS 2.2 via iTunes and iOS 3.1.3 via
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
https://buy.itunes.apple.com/WebObjects/MZFinance.woa/wa/touchLegacyLandingPage
A 2G to 4.2.1. Requires iTunes version 10.X. If a Mac it requires OSX 10.5.8 or later. With OSX 10.4.11 you can only go to iTunes 9.X which gets you as high as iOS 4.1
A 3G to 5.1.1 Requires iTunes version 10.5 or later
A 4G to 6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
Identifying iPod models
If you iPod has cameras it is a 4G then:
iOS 4: Updating your device to iOS 5 or later
You need iTunes 10.7 or later onthe computer -
my iPad does not show the Airplay icon. The software is iOS 7.0.4, I have home sharing turned on and have an Apple TV. What should I do?
If you don't see the AirPlay icon in the Control Center:
1. Turn off router, Apple TV and iPad
2. Turn on router and then wait 30 seconds for it to complete start-up process
3. Turn on Apple TV and then wait 30 seconds for it to complete start-up process
4. Turn on iPad (wait 30 seconds) and test AirPlay -
I have recently updated my iPhone software to iOS 7.1 and found the sound on my alarm not working, all other sounds are..
I have turned phone off, checked the volume and the do not disturb function is off, any other ideas?Mine did the same thing 2 days in a row i get the phone and no service I put it in flight mode and back & still nothing I have power down then restart. BTW mine is factory unlocked
-
Latest Software of iOS 7.0.3 Wont install even when I have deleted all applications.I don't want to buy more memory as I have already done.
What model iPad and what iOS version is it currently running?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom
Maybe you are looking for
-
need help urgently,am useing microsoft access as my database,whenever i try to insert data into the table i have in my database it tells me syntax error in INSERT INTO statement.please how do i overcome this problem.my code is below.thanks in advance
-
Flex 2.x Resources Flex sites/blogs: Adobe: http://www.adobe.com/devnet/flex/ DEVNET - start here! http://www.adobe.com/products/flex/productinfo/faq/ http://www.adobe.com/cfusion/communityengine/index.cfm?event=homepage&productId=2 http://blogs.adob
-
Opening web form in SmartView 11.1.2.103 - display name and alias
Hi, Through some useful forum here, I have upgraded our SmartView, APS and Essbase to version 11.1.2.103 in order to display name and alias in SmartView. However, since I am very new to Hyperion overall, I am still exploring whether it is my limited
-
Opening multiple pictures in Photoshop
I am working on a picture file, jpegs, changing the size, the level, etc. I open several pictures usually 3 or 4 and when I try to open the next I receive a pop up error message that says: "Could not complete your request because of a program error."
-
5.1 Sound with iMac (late 2012)
Hy Folks, I'm planning on getting a 5.1 Sound System for my new iMac. I was doing a little bit of a research through the web and the only thing I found (that sounded logical) is a cable with a 3.5 mm jack on the one side and on the other a toslink co