HT4623 can i reset my ipad password without loosing pictures?

can i reset my ipad2 forgotten password without loosing my stored pictures?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Similar Messages

  • How can I reset my administrator password, without knowing the original administrator password?

    Hi guys,
    I use a MacBook Pro with OS X 10.8 Mountain Lion. A few months ago I reset my administrator password and have not been able to remember it since. Consequently, I haven’t been able to do any software updates, my computer is running slow and I'm getting a lot of pop-up junk on my screen. I’m the only user on my computer, apart from the Guest User (Sharing only).
    How can I reset my administrator password, without knowing the original password?
    Thanks.

    Resetting Password and/or Home Folder Permissions

  • Can I reset an iPad 1 without a computer and I don't know my restriction code?

    Can I reset my iPad 1 without using a computer and I don't know the restriction code?

    Try removing what is called the iPod Photo Cache on your computer.
    http://support.apple.com/kb/ts1314

  • Can you reset a forgotten password without losing all data on an iPod touch

    How can you reset a forgotten password without losing all data. 

    You have to restore from the computer to which it is synced.  Everything on the ipod should be on the computer so it can be put back on the ipod after restore.
    http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf

  • How can I reset my admin. password without the MAC OXS  reinstall, bought mine used and have no such disk

    Hi, how can I change my admin password without the reinstall of MAC OXS disk or whatever that is, I bought my macbook privately and cant update my adobe flash without the password which I have never set up. but anything I type in is wrong...... as a password.

    ok have read all relivant posts and have tried the restart command+R which does absolutely nothing. My Computer opens up as usual.
    I have found another response which suggests command+S and generate an entirely new admin. and password and you are not supposed to loose a single file.
    Has anyone done this and been successful? I have just installed a new hard drive in the last 3 months and don't want to do any damage.
    Hearing a success story would be nice.  Thanks

  • How can i reset my ipad 2 without my apple password because Ive forgotton it

    i want to reset my Ipad 2 but have forgotton my apple password. Can I reset it without the password? Im desperate for a solution. Can anyone out there help please?

    That is Activation Lock (an anti-theft system) and there isn't a way around it other than to recover your password. Apple can help with that: If you forgot your Apple ID password

  • How can i reset my IPad password if i am locked out

    My Ipad is disbled and i dont have the computer that i last synced it on how can i restore my IPad or change the password so i can get into it?

    Old thread, I know, but since it's one of the higher google hits for this issue:
    1. Connect the iPad to your computer. Dismiss the message that it's passcoded and can't connect.
    2. Hold down the Home button and the Lock button until it restarts and then presents you with the "Connect to iTunes" graphic.
    3. iTunes should then prompt you that it has detected an iPad in recovery mode and let you restore it.

  • HT4623 Can i update my ipad 2 without a laptop

    Can i update my ipad without a computer? Its iosh 4.3 i think?

    You need to transfer purchases to computer and backup your iPad. You will need to restore from backup after the update.
    Transfer purchases
    http://support.apple.com/kb/HT1848
    How to backup
    http://support.apple.com/kb/HT1766

  • HT4623 If I reset my ipad completely will my pictures be deleted

    Will my pictures be deleted if I factory reset my ipad? I have only one downloaded app and my iCloud is telling my that I don't have enough storage space to back up my ipad

    iCloud gives you 5 GB of storage for free for backup. You can purchase more storage here (http://support.apple.com/kb/HT4874) or back up to your computer.
    http://support.apple.com/kb/HT5262   explains which is the best option for back up for your needs.
    Do not reset your iPad for this issue.
    Let me know if this helps.

  • How can I reset my apple password without deleting my current apps even though I don't know my current password

    Please help me

    You need to contact Apple by:
    1 - Use the Express lane and start here:
    https://expresslane.apple.com
    then click More Products and Services>Apple ID>Other Apple ID Topics
    or
    Apple - Support -form iTunes Store - Contact Us
    2 - Call Apple in your country by getting the number from here:
    http://support.apple.com/kb/HE57

  • I reset my IPAD password but the verification email wasn't sent to my primary or secondary email address.  Without the verification email I can't complete the password change process.  Any recommendations?

    I reset my IPAD password but the verification email wasn't sent to my primary or secondary email address.  Without the verification email I can't complete the password change process.  Any recommendations?

    Great tip from dorothy.  Also, some isp services are more aggressive from others in filtering what they think might be spam.  You might check your spam file from a computer, and see if the verification e mails are sitting there.   When i wen through the process, the verification e mail came to the new e mail address in under a couple of minutes.

  • How can I reset my iPad that I forgot the password to my linked account.

    My iPad is linked to an old gmail account of mine that I believe has been hacked.  I have tried everything to
    reset my gmail password and it hasn't worked.  I think someone changed all of my information.  I have
    tried to reset my iPad by holding down the home button and power button and connecting to iTunes.  I
    did the restore but now it is saying "This iPad is currently linked to an Apple ID. Sign in with the Apple ID
    that was used to set up this iPad."  It provides me with the Apple ID: m*****@gmail.com and wants me
    to enter the password but I don't know the password and have tried everything to retrieve it.  There's nothing
    on the iPad so I don't care about erasing any data.  How can I reset the iPad so that I can use it?  Is there
    another method besides the one I have already tried?

    If your iPad is running iOS 7, there is no way you're going to be able to regain access to your iPad without the password for the Apple ID used by that iPad. You cannot even restore the iPad to factory settings without the password. This is an anti-theft feature.
    You will need to contact Apple and try to regain control of your Apple ID. It is entirely possible, however, for the hacker to make changes to your Apple ID that would make it difficult or impossible to do that. You need to act as quickly as possible!

  • How can I reset my iPad YouTube password? I can't sign into youtube on iPad. It says Username or password is wrong although both are correct when I log into YouTube account via Google.

    how can I reset my iPad YouTube password? I can't sign into youtube on iPad. It says Username or password is wrong although both are correct when I log into YouTube account via Google. I also tried my husbands youtube login and password and the same outcome. Now I cant log into YouTube via the iPad account. I can log into Youtube via Google however my subscriptions and favorites are all gone. Can I reset the YouTube account located on the iPad? I cant seem to reset the password or delete the app and re-add. I dont want to reset the iPad since I have alot of videos and pictures on it.

    Do you have Google 2 stage authentication turned on?
    If so, you wont't be able to use your normal google password, but will have to instead generate an "application specific" password for the iPad YouTube app in the google security settings section.

  • I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password.  How can I reset the old ipod without affecting the new one and how can I unlock the old one?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software

  • HT201240 I've forgotten my administrator password and can't download software. can anyone advise how to reset a new password without having the original?

    I've forgotten my administrator password and can't download software. can anyone advise how to reset a new password without having the original?

    Forgot Your Account Password
    For Snow Leopard and earlier
         Mac OS X 10.6- If you forget your administrator password
    For Lion/Mountain Lion
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password and
         OS X Lion- Apple ID can be used to reset your user account password.
    If you are unable to boot from an installer DVD:
    (these will only work on Leopard or earlier)
      1. Boot to Safe Mode by restarting and after the chime press and hold down
          the COMMAND-S keys until a black screen with white type appears.
      2. At the prompt, type the following commands pressing return after each
          command line:
         /sbin/fsck -yf
         If you do not receive a "Filesystem OK" message then repeat this command
         until you do.  If after seven tries you still do not receive a "Filesystem OK"
         message, then the system is corrupted and needs to be reinstalled.
         mount -uw /
         cd /private/var/db/netinfo
         mv local.nidb local.old
         rm ../.AppleSetupDone
         shutdown -r now
    The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
    This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
    Reset Admin Password Using The Terminal
    You can reset the password by printing out (or writing down) and carefully following these steps.
    First, find the short name of the admin user on the machine. The easiest way of doing this is by looking at what the directory is called in the Users folder.
    Now, start in Single-user Mode. It should boot into a command line.
    Enter these exact lines. Press RETURN after each.
    mount -uw /
    ifconfig lo0 up
    cd /var/db/netinfo
    netinfod -s local
    Now you'll need that short name. Enter "passwd", a space, and the short name of the admin. For example, if the admin was rather prosaically called "imadmin", you would enter "passwd imadmin".
    The computer will now prompt you to change the password for "lmadmin" (or whatever the short name was). Go ahead and enter a new password.
    Now, enter:
    sync
    reboot
    and the machine will reboot. The admin password should now be changed.

Maybe you are looking for

  • JBO-26080 error during commit

    Hi, I am getting a JBO-26080 error attempting to commit a view using the Business component browser. The error is: (oracle.jbo.DMLException) JBO-26080: Error while selecting entity for Bank The view, entity and stack trace are below. Any insight appr

  • No free buffers available in buffer pool default

    We encounter this error ORA00379 No free buffers available in buffer pool default with one of our online transaction system. Initially, the errors occur once every 30 sec, and became less frequent (about twice a day) after the buffers has been increa

  • Is it mandatory to Publish a service in Service Registry to consume it?

    Hi Experts,    We have developed a Service interface with two service operations in the ESR. In the backend ERP system, we have generated the proxy for the interfaces and implemented it. Using SOAMANGER, we have generated the WSDL. But when we try to

  • Regarding ACH payment !!!!!!!!!!

    One of our user created an ACH file and sent it to the bank for payment.He created this ACH file in one bank but by mistake sent it to other bank for payment.The payment has been cleared . Because of this my bank balances have changed. Could anyone h

  • IPhoto doesn't show thumbnails anymore

    I actually figured this out- I am posting this as a solution, not a problem. It frustrated me but I figured it out. THE PROBLEM: You click on an "event" and it brings up a picture from that event, however you can only see one picture. Clicking left-r