HT4623 Can I retrieve data lost during update?

Can I retrieve data tha was deleted during an update?

What data?
You should have made sure that everything was on your computer before any update.

Similar Messages

HT4623 Is there ANYWAY to retrieve data lost after updating to iOS 6? Backup failed.

I need to know if Apple can retrieve lost data after restoring mi IPhone 4. Backup failed.

I have it but didnt back up the iPhone 3GS when i updated the iPhone 4G it didnt erase anything off of that so i didnt think it would on the 3GS

IPhone data lost during update using friend's pc.

Hello
My g/f has an iPhone 3G which she has used a lot for 18 months and had lots of saved texts and photo’s etc, but she is not very good at backups and has lost everything when upgrading from the original software, (about 2.6) to the current 4 something. Very unfortunately and unwisely, this was not even done on her own computer, but on a friend’s.
She has her own desktop pc and uses iTunes but hardly ever connects the phone and always declines to update when she does connect. She last connected about 6 months ago.
On New Years Eve we were at a friend’s house and a knowledgeable sounding guest offered to update her phone on her friend’s computer. They have their own iTunes account on it.
We connected the phone up and it started updating via the iTunes program and after one or two hours the software and firmware update completed. The sync options were then presented and as the knowledgeable person had by then gone home we thought “Well, we don’t want to sync with anything on this computer, we will disconnect and sync later on g/f’s home computer.” (We are still not quite sure what syncing is although g/f thinks she has synced before from home)
As you have guessed, the software upgraded fine but phone has been wiped of all data, pics, iTunes downloaded, texts, contacts, notes, calendars.
The obvious problem in this case is that we used someone else’s pc. I have located the mobilesync backup folder on g/f’s own pc and it is empty.
Is there any hope that we can retrieve anything from our friend’s pc which we updated on? Would a folder have been created separately on their pc for my g/f’s phone?
I was not watching the pc the whole time it was updating and did not see everything that happened, but what I have established is that when I plugged her phone to her pc yesterday I got the warning message saying that the phone has been synced to another computer, (presumably the friend’s) and all data on the phone will be erased if I sync on this one (her one).
What I don’t know is whether this warning message had come up on New Years Eve on the friend’s computer while updating, and whether it was ignored.
We have been back to our friends but they are getting a bit fed up with us, I think they will put up with us using their pc one more time so this time we will have to know what we are doing. I have an external HD so I could maybe copy the iTune files from their pc and work on them from home later?
With thanks

Well.... I guess based on the replies, I should consider that password manager info not being part of the backup is normal for all of us.
If not, maybe it's just one of these numerous glitches and bugs I have since I own a blackberry.

If i downgrade my itunes can i save data lost when updating to iphone OS 4?

Hi i was one of the masses who lost their data updating from 313 to OS 4 during june 2010. I had itunes version 9.1 where my content was backed up perfectly on that and i had to update it to 9.2 to upgrade my phone to OS 4.
I got a message saying I have to update to the latest version of itunes to support the latest iphone software for my phone. when I did that and updated, I got the infamous error code my phone crashed everything was erased, when I came to restore from my backup file which is still dated to june 20th 2010, the data was blank.
so if i downgrade my itunes to 9.1 and my iphone back to OS 3.1.3 would I be able to recover my content?

That won't work... reason being is you need the following requirements for the iPhone 4.
Mac system requirements
Mac computer with USB 2.0 port
Mac OS X v10.5.8 or later
iTunes 10.1 or later (free download from www.itunes.com/download)
iTunes Store account
Internet access
Windows system requirements
PC with USB 2.0 port
Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.1 or later (free download from www.itunes.com/download)
iTunes Store account
Internet access

How can I retrieve pictures, lost from my iphone during a backup?

How can I retrieve pictures, lost from my iphone during a backup?

The photos could have gone a couple of different places ...but it is unlikely that they are lost forever. It kind of depends how your Backup was done. With many Computer-based iTunes connections, your Computer Photo App will actually open first when you connect your iPhone and the photo transfer will happen between the iPhone and the App. Assuming that isn't what happened in your case, but you did Backup on iTunes, you could reconnect to iTunes and then click on your iPhone button on the Computer screen ...typically the iTunes Summary screen will show up ...but you can tab-through the various iTunes Screens and find the Photo page. You could check your options and see if you have a Manual Sync setting regarding iTunes to iPhoone ...this would mean you have to select the Photos you want to download to the iPhone during the Sync.

5300 Dead after connection was lost during update

5300 Dead after connection was lost during update. Won't turn on, power up-nothing. Help?

It is now dead.
Take to a nokia care point.
Care points:
UK
http://www.nokia.co.uk/A4228006
Europe:
http://europe.nokia.com/A4388379
Elsewhere:
http://www.nokia.com and select your country.

How can I retrieve a lost password from my computer necessary to install Adobe flash player

How can I retrieve a lost password from my computer necessary to install Adobe flash player

Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password,
     OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself
    Reset OS X Password Without an OS X CD — Tech News and Analysis
    How To Create A New Administrator Account - Hack Mac

How can I retrieve data on a time machine if I have forgotten the password?

How can I retrieve data on a time machine if I have forgotten the password?

There are so many passwords.. which one do you mean?
TC password or disk password in the TC.. no problem.. soft reset.
Or recover the password.. via the Tesserax method.
https://discussions.apple.com/docs/DOC-3372
If you encrypted the backup in TM and have forgotten that password you are doomed.. there is no way to recover it I know of.. there is a warning.. very clear.. do not forget the password.
http://pondini.org/TM/31.html
Pink box at the bottom.

How can i retrieve the lost bookmarks on my ipad ?

How can i retrieve the lost bookmarks from my ipad ?

See if this gets them back.
Quit Safari completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

How can you restore photos lost during software update on iTunes?

How do you restore or even find photos lost during software update of iphone 4 on iTunes?

Why did you not back it up before performing the update? Did you perform the update on a computer other than the one you normally sync with?
As already stated, if you didn't back it up, the data is now gone.

Can not retrieve data source status

I have 3 DPS (6.3) running fine with 3 (6.2) DS downstream, running fine as well, on RHAS 4 U4 .
I don't understand why the DPS console always report it can not retrieve the data sources status. I checked the DS access logs, and I see each DPS
default monitoring request (on the "" DN) every 30 seconds, which returns one entry, and no obvious error in any DPS or DS error log .
Any idea ?

Hi,
it looks like a a known problem to me that may appear in the following situation:
In somes cases, the proxy and the DSCC (console) uses different hostnames: For instance, the proxy may be registered to the admin framework as myhost.sun.com and the proxy itself may use only myhost. Operation status is exposed by the proxy as an LDAP entry with dn cn=myhost,.....,cn=monitor. When there is a naming mismatch, the console search for cn=myhost.sun.com,...., cn=monitor and can't find the entry, so the status is unknown.
Don't know if you are in this situation but it might worth checking this.
Hope this helps
-Sylvain

Can I retrieve data from a restored iPhone?

I restored my iPhone remotely because I thought it was stolen - then found it. A security service in my town claims to be able to retrieve data for $100. Is that possible?

He says he has software that can do this kind of thing. Does it matter if he has my mac account? I don't backup on cloud - backup on iTunes.

Can i retrieve a lost profile

Hi,
Is there any way to retrieve a lost profile? I linked my wife's iPhone to my MAC book to download photos, and iTunes kicked in to ask me if it was ne or her iPhone. I picked her iPhone, not knowing this was an old profile linked to her old iPhone from 15 months back. So iTunes duly wrote this profile onto the new iPhone and deleted all photos, apps, texts etc from the last 25 months. No back ups exist.
Any thoughts? even on how to get just texts back? I think we are resigned to the fact the photos are gone, but are keen to see what options may exist.
Thanks!

You were prompted to transfer a backup to the iPhone or set up the iPhone as a new iPhone?
If so, this means the new iPhone has not been connected to iTunes since it was purchased. The prompt provided is designed to be done right away with a new iPhone.
If there is no backup for the new iPhone including an iCloud backup, the data is lost.
Had you selected as a new iPhone, this would not have occurred.

Recovering data lost during change of unit of time for Info structure S061.

Dear Sir,
I have changed the period unit from 'month' to 'week' through SPRO>Logistic Data Warehouse>Activate update.
Due to this the data of Info Structure S061 is lost and when MCI3 transaction is executed the message " No Data found"
message is shown.
Kindly guide me how to get back the past data in MCI3.
Thanks and Regards,
R N Sabat.
Edited by: rnsabat on May 25, 2011 11:01 AM

Hi,
A update period of day/week will not work for S061. Any structure with costs must be set to month or posting period. See note [180047|https://service.sap.com/sap/support/notes/180047].
If you want to make cost evaluations in the information system, only use the period unit 'month' or the posting period.
Once you adjust the customizing it will be necessary to rebuild the info-structure S061 with OLPM transaction. This works on the basis that a temporary version is created e.g. &(1
This temporary version must then be copied to the live version 000 using transaction OLIX.
-Paul

Can not retrieve data in Crystal Report

Hi,
I have a problem to load data from Crystal Report in an SBO form with the ActiveX DI object : the Crystal Report Viewer message display : 'Failed to retrieve data from the database. Details [Database Vendor Code:208]'
It seems do not change the name of database in SQL Crystal Report query : My SQL query in Crystal Report file is a generic query : it must run with all custom database with the same datatable ; so the database name in FROM clause must be change with the SetLogonInfo : but it do not run !
Have you an idea ?
Francis
Here my code :
Public Class frm_CRViewer
' Adding References of project : CRAXDRT and CrystalActiveXReportViewerLib11
Private WithEvents MRO_CRV As
CrystalActiveXReportViewerLib11.CrystalActiveXReportViewer
Public Sub New()
Dim msa_Form As SAPbouiCOM.Form
Dim dsa_ActiveX As SAPbouiCOM.ActiveX ' Item <ActiveX> from form XML
dsa_ActiveX = msa_Form.Items.Item("axCRV").Specific()
dsa_ActiveX.ClassID = "CrystalReports11.ActiveXReportViewer.1"
MRO_CRV = dsa_ActiveX.Object
' Create the crystal application
Dim dob_ReportApp As New CRAXDRT.Application
' Open the report
Dim dob_Report As New CRAXDRT.Report
dob_Report = dob_ReportApp.OpenReport("c:MyTest.rpt")
' Defined to log on to the data source, and change the database name in FROM clause
Dim dob_Table As CRAXDRT.DatabaseTable
For Each dob_Table In dob_Report.Database.Tables
dob_Table.SetLogOnInfo("192.168.2.10", "AeroOneDemo", "sa", "45dfrfg5")
Next
' The report have a parameter in the sql query
dob_Report.ParameterFields.Item(1).DiscreteOrRangeKind = CRAXDRT.CRDiscreteOrRangeKind.crDiscreteValue
dob_Report.ParameterFields.Item(1).AddCurrentValue("15")
' Display the report in SBO form
Title = pst_ReportName
MRO_CRV.ReportSource = dob_Report
MRO_CRV.ViewReport()
End Sub
End Class

Try these ...
<a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2002650&sliceId=&dialogID=7002531&stateId=1%200%207004328">http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2002650&sliceId=&dialogID=7002531&stateId=1%200%207004328</a>
or
<a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2000957&sliceId=&dialogID=7002728&stateId=1%200%207004460">http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2000957&sliceId=&dialogID=7002728&stateId=1%200%207004460</a>
or
<a href="http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2001075&sliceId=&dialogID=7002728&stateId=1%200%207004460">http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2001075&sliceId=&dialogID=7002728&stateId=1%200%207004460</a>
or
[url=http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2003637&sliceId=&dialogID=7002728&stateId=1%200%207004460]http://technicalsupport.businessobjects.com/KanisaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=c2003637&sliceId=&dialogID=7002728&stateId=1%200%207004460[/url]

HT4623 Can I retrieve data lost during update?

Similar Messages

Maybe you are looking for