HT4623 Can I use lightning SD camera card reader after upgrading my iPad 4 to iOS. 7?

Hi! All,
I am using lightning SD camera reader with my iPad 4 running with iOS 6 without any problem. But I would like to upgrade to iOS 7. I saw some reviews
after upgrading the card reader is not working. I contacted apple support community people for the above issue recently through chat. They said the device should work even after upgrading. I have not yet upgraded. But iOS 7 is tempting with its amazing look. What do I do? If I upgrade and my SD card reader wont work then I will be in great disapppointment. Please help if any body has answer for my problem..
Message was edited by: hemanthkumar.narsetti
Message was edited by: hemanthkumar.narsetti

If your SD card reader is from Apple, you shouldn't have any problems. If your card reader is from a 3rd party source, it's possible to have a problem. Do the update.
 Cheers, Tom

Similar Messages

  • HT4623 can you download pictures from a card reader to iPhone?

    Can you download pictures from a card reader to the iPhone?

    AverySwan wrote:
    Can you download pictures from a card reader to the iPhone?
    That would depend upon the card reader, who makes it, and what their suppointing software does.  I happen to have an older ZoomIT SD card reader with a 30 pin dock connector.  The hardware maker provides an app for iOS that allows me to use the adapter with my iPhone 4 and I can open pictures from the SD card and view them.  I believe it even allows me to save teh image to my cameral roll if I want.  Since it does have the 30 pin dock connector, I need to use the Apple adapter to plug it into the Lightning port on my iPhone 5, but is still works just fine there too.
    I also have the Apple Camera Connection Kit (30 pin version) but it is much more restrictive.  It only works with the iPad, and it only copies certain files form teh SD card to the iPad. (The files must be in the "/DCIM" folder on the SD card, the file name must be in the older DOS 8.3 file name format, and I believe it only woirks with JPG, and MOV files.  As you can see, the Apple device is built to let me view pictures from my point-n-shoot cmera on the iPad screen, whereas the ZoomIT allows copying of content to/from the SD card and an iPhone/iPad/iPod Touch.
    Now for the bad news, I don' tthink the ZoomIT reader is made any longer, and when you can find them, the sellers are usually charging close to $125 for them.

  • Can't e-mail from Safari's Reader after upgrading to 7.0

    How come I can't e-mail directly from Safari's Reader after upgrading to 7.0?  That was a great feature.  Why did Apple disable this or is something wrong with my Safari browser?

    Thanks.  I didn't know the command but the old version had a menu that appeared at the bottom of the page.

  • How can I use an international credit card when I bought my iPad in china and currently a residence of china?

    I want to purchase apps and because I reside in CHina the options for payment are Chinese banks and yet I hold an international credit card. I want to pay for my apps and unfortunately because I am not a Chinese citizen, I don't hold a local credit card but debit cards, does it mean I can't use my international British bank credit card to buy apps in China, as I also bought my IPad in China. The prompts for payment don't give me an option of international banks, but local Chinese. Please help me as I would love to have freedom to use my IPad and be able to purchase apps I want.

    sss

  • Can I use 8250 lcd with card reader ...

    I have broken Photosmart 8250 and I want to use lcd display for viewing pictures from printer`s card reader. What can I do (hammering, shortcuting ...) ?

    If your SD card reader is from Apple, you shouldn't have any problems. If your card reader is from a 3rd party source, it's possible to have a problem. Do the update.
     Cheers, Tom

  • How can I restore my card reader after upgrading to Mavericks?

    I have a MacBookPro that is not identifying the SD card reader since installing Mavericks. I have heard that ScanDisk has a patch but I have not been able to download it from their site. I have read that downloading the SandDisk patch on a PC and then transferring it to a Mac will fix the problem. I would sure appreciate some help restoring my Mac after uploading to Mavericks. My firewire drive does not seem to be working either. I cannot use my M-Audio firewire interface for recording and editing in ProTools. This represents a lot of down time and/or a pretty big loss of money for me. Can anybody tell me whether Apple provides support for these types of problems or is it completely up to the user to solve them? I am a relatively new Apple user. I bought the MacBook Pro shortly after they were released, about 2 1/2 years ago. Up to that time I was strictly a Windows user. I am surprised Apple did not seem to go to much, if any trouble to warn me of the difficulty I would have after upgrading to Mavericks. Apple, where are you?

    Launch the Image Capture app in your Applications folder.
    Conenct the card reader.
    Then see if Image Capture recognizes the card unde DEVICES top left side of the Image Capture window.
    BEFORE upgrading from one OS X to the next, check the websites for your third party software and hardware for compatibility.
    Apple is not responsible for third party software and hardware used with your Mac.

  • HT4623 Can not get pass Term and Conditions page after upgrade?

    Can not get pass the Terms and Conditions page after upgrade?

    Restart your phone and if that doesn't help, reboot the device.
    Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up.

  • Can't use Canon iR C4580i to print after upgrading to Mavericks

    Can anyone help to solve the problem?
    I have tried to download the driver version 10.2.0 but still cannot use canon iR C4580i to print.
    Thanks

    Hey WKWF,
    Thanks for the question, and welcome to Apple Support Communities.
    The following article provides relevant troubleshooting information for your issue:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    USB printers and Bonjour-enabled network printers
    Follow these steps until the issue is addressed:
    1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    5. Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    1. Reset the printing system, then add the printer again.
    2. If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    3. Contact the printer vendor or visit their website for further assistance.
    Thanks,
    Matt M.

  • Can't find email attachments after upgrading my ipad to IOS 7.1

    I use my ipad onstage for song lyrics and set order. I compose and edit the song lyric sheets in Word on my PC, email the files to myself as attachments, and open them in Word on my ipad. Until this morning, I had no problem doing this. After I upgraded to IOS 7.1 this morning, my emails on my ipad (latest version) all have the attachment paperclip greyed out. Does anyone know what setting to adjust so I can access them again??

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).
    No data will be lost.

  • TS1398 Why can't i get a good wifi connection after upgrading my my ipad2 IOS 5.1.1 to 6.0? I always need to turn it OFF then ON just to have a connection. But after a few minutes i need to do it again. Help me please. Thank you

    When i upgraded my IOS. I always find it hard to continue my search in internet. I need to turn off the wifi connection then on it after wards even though using the laptops and other mobile phone with wifi have a very good signal. Just like this message, i need to off it then turn it on again.

    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.

  • Using lightning to SD Card Camera Reader with iPhone 6 plus

    Using lightning to SD Card Camera Reader with iPhone 6 plus gives me the message that it is incompatible.  Is that correct?

    Yes. The Camera reader is not compatible with iPhones.

  • I can't use my temporary debit card to purchase

    I can't use my temporary debit card to purchase. I'm international student, I just came US 2 days ago. How I can solve my problem?

    This Apple support page has a list of accepted forms of payment.
    http://support.apple.com/kb/HT5552

  • Can I use Iphone 4 sim card with Iphone 3g?

    Can I use the micro sim card in a Iphone 3g? I have to transfer from my iphone 4 to my iphone 3g. Thanks for any help.

    As Deggie says, I have been using a micro sim in my 3GS since the iphone 4 came out last year. I was sent one free from my provider as I had registered an interest in the iphone 4 but decided to see out my 3GS 2 year contract. Got the number swapped over anyway and got a sim convterter for free from the provider.
    [IMG]http://i1212.photobucket.com/albums/cc441/brendan002/c37ca349.jpg[/IMG]

  • Can I use a USB camera to import directly live footage into imovie as opposed to firewire?

    Hi!
    I use iMovie to directly import live footage from my camcorder.
    I've been using old Mini DV cameras to do this but this technology is being outdated with camera manufacturers now all moving to USB.
    Can I use a USB camera to take live footage directly into iMovie just the same was as i've been doing with the firewire connection via the old Mini DV camcorders.
    Alternatively, are there any firewire camera's that any could reccomend?
    Any help or suggestions would be greatly appreciated.
    Chris.

    No, you cannot import in real time from USB. These USB camcorders will import faster than real time or slower than real time, depending on the speed of your computer.
    If you need to import in real time, there are some USB webcams out there that are used mainly for video chats and the like that might work. You may find an HD model.You can also do this with your built in iSight camera.
    With a real HD video camcorder, you will need to import it after you shoot.

  • After upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to co

    after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it?  thank you

    Hello pichastos,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping  (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
    Take care,
    Alex H.

Maybe you are looking for

  • Looking for a contract actionscript developer

    San Francisco Based Contract Actionscript -  Flex Developer | Streaming Video Solution We are currently seeking a full or part time (at least for the next several months) senior Actionscript & Flex contract developer to help establish our online stre

  • JNDI obj not binding to initial context--10gRel 2 issue only,works in rel3

    hi all, The issue I am writing about is an issue only in OAS 10g release 2 (10.1.2.0.2) and not in release 3. I have an issue where in I am trying to bind a data source object to the initial context. This data source object reference is created dynam

  • Change the tab color

    Hi, i'm unable to change the tab color of panelTabbed item, i've tried the following in a css sheet: af|panelTabbed::tab:selected { font-style:italic; background-image: url("../Images/section_label_body.jpg"); border-bottom-color: red; border-color:

  • [PWS0007] Operation result set not found.

    Hi, I am working with java,db2 on AS/400. When I am using my application with multiple users hitting the submit at the same time,I am getting the following error: Exception: [PWS0007] Operation result set not found. Cause . . . . . : The handle speci

  • DAQ FP dimmed in CVI menu Library

    Hi, All i have met a problem today, i have installed DAQ driver first (DAQMX+Traditonal ) and then install the CVI.  but the DAQmx and traditional FP are dimmed in CVI menu Library. althrough all of those are sucess listed in MAX .  i tried to repair