HT4623 Can not get camera of photo to take video anyone have an answer

My iPad camera will not let me choose video. It won't go off photo. Any suggestions will be greatly appreciated.

How are you trying to change between photo and video ? You should be able to change it by sliding the Video / Photo / Square options un/down so that the one that you want lines up with the yellow dot - is that how you are trying to do it and it's not working ?

Similar Messages

  • I am on a i mac osx 10.8.4 and can not get into i photo i keep recieving the message "The library could not be opened because the file system of the library's volume is unsupported.

    I am on a i mac osx 10.8.4 and can not get into i photo i keep recieving the message "The library could not be opened because the file system of the library's volume is unsupported."

    Where is the Library? It needs to be on a disk formatted Mac OS Extended (Journaled)

  • TS3988 I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have  check the settings on both devices and they seem

    I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have  check the settings on both devices and they seem to be t

    There are only two things that you must do to connect a device to calendars:
    1)  In settings>icloud, you must log in, WITH THE CORRECT ID/PASSWORD, and
    2)  Turn on calendars on the same page.
    You said that the iphone 4 and ipad **used** to automatically sync.  Do they no long sync?

  • I can not get real audio player to record videos from the internet, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

    I can not get real audio player to record videos from the internet i use firefox as my browser on windows 7, I believe the problem is that my Firefox browser is set for 64 bi... i need to change it to 32 and do not know how.

    dont know what to do

  • I can not get 'find my iphone' to work. I have followed the instructions to no avail...help!

    i can not get 'find my iphone' to work. I have followed the instructions to no avail...help!

    See the Troubleshooting in this... http://support.apple.com/kb/HT4319

  • HT4623 Can not get pass Term and Conditions page after upgrade?

    Can not get pass the Terms and Conditions page after upgrade?

    Restart your phone and if that doesn't help, reboot the device.
    Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up.

  • I can not get apple air play to work. I have down loaded three diffrent apps looking for a solution none of them were the right one. I spent over $10 in these apps. Can I get a refund. Do I need apple tv to run air play?

    I can not get apple air play to run from my iTunes to my WiFi reciever.
    I have spent money on 3 different apps looking for a solution.
    None have worked. Can I get a refund?
    Do I need apple Tv to work Air Play?

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    iTunes- Troubleshooting AirPlay and AirPlay Mirroring
    iTunes- Using AirPlay
    Apple TV (2nd and 3rd gen)- Understanding AirPlay settings
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay
    Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs  that do not support Airplay and mirroring.
    Other solutions are the Air Parrot, StreamToMe, and AirServer.

  • I have XP, SP3; I can no longer burn CDs get a "insert a blank disc error". I have bought new blank discs of various kinds, drive works well otherwise. It just will not allow me to burn playlists anymore. Anyone have an answer to this?

    Getting "insert blank disc error" , cannot burn CDs anymore. Tried new/other CDs, same issue. Anyone have an answer to this?

    Getting "insert blank disc error" , cannot burn CDs anymore. Tried new/other CDs, same issue. Anyone have an answer to this?

  • A1, Can not get Camera edits to Save. Arcsoft Gallery (Trial) will not upgrade

    Sorry but I need to first start with a rant,
    <rant> I receive the pad, spend days playing and customizing, learning features.  Once I ran across the edit feature from within the camera viewer (which was very cool), I played with a picture and went to "Save".  I was presented with a message that if I want to save I would need to "Buy" the app.  First off I was not in an app, I was using the built in camera viewer software, there was no identification, no "About" tab and I did not not use an external Icon to get to this point.  Ok, I suck up and press continue to find out the software is "Arcsoft Workshop 4.6 (Trial)" and the upgrade would be $2.99.  I really think this was a low blow from Lenovo as to beat up on their customers for mere $2.99.  Ok, after having to fight with the Lenovo app store (reg + fight crashes which are detailed elsewhere) I finally get it purchased and downloaded just to be awarded with the message "Can't Install" with an big red "X").  Now things continue go down hill..... </rant>
    Ok, just before it bombed out I was given a message to "Replace an system app" which I also agreed to. That gave me the idea that the old application may be holding up the install process.  My great idea led me to uninstall  "Arcsoft workshop trial" which did not help anything and now I have no edit functions at all
    When the app first mis-behaved I was asked by the app-store to report problems which I did, the next morning I had an email from a nice lady that worked at MobiHand (apparently they service the Lenovo app store)  and an attachment with the workshop apk file.  I was able to get that file to install
    But wait, we are not done with this story...   I had Workshop back but if I clicked on ANY picture or tried to "Edit" from the camera I was presented with "Can not open image!"  Nothing I tried would work, I uninstalled, reinstalled, bla, bla.  I then returned the nice lady's email with the new problem with no response for the next 2 days.
    Meanwhile I am trying to figure out how to get back to where I was to start with and have edit functions (how be-it with no ability to save).  Since I installed the trial app and did not have a copy to reinstall it back I was stuck.  After much research (on the forums) I was able to confirm that a factory reset would bring back the old app as well as perhaps fix a few other things that are plaguing me.  During the 4 system updates previously I made I never did the reset and all my customizing stayed (which I was happy about) but now with the pending reset I knew it would be the end of all my past week of work.  Of course I backed up everything but still the re-setup would be hours.  (<rant> all this for a #$!@#$@#$ "Save" button! </rant>)
    I followed this exact procedure;
    1. Made sure all updates were completed. (v3.2.1 (build ends with 1109)
    2. Factory Reset (under setup, privacy) 
    3. Loaded Astro and backed up ALL my initial apps (including Workshop Trial)
    4. Set up Lenovo app store 
    5. Took a test picture with the camera
    6. Viewed test picture and selected "edit"
    7. Made a test edit
    8. Selected "Result" and "Save", I was presented with the "you must buy" message
    9. Completed the Arcsoft Workshop 4.6 download and install  (Hurray no problems this time!)
    But wait.... The story continues.....
    I go to edit a picture and was presented with 2 choices, Workshop and Workshop Trial.  For some reason I was not asked to overwrite the old trial version but I think to my self, this is OK and choose the new full app.
    I am presented with "Can't open Image!"    <rant> (&^#@%$^$& 
    Lets see, I have about 12 hours in this project to get a "Save" button and NaDa, no forward progress, Game further delayed, EKKKKKK! </rant>
    Workshop trial at least still works as it always has.
    <loud_rant> Now, I am po'd, nothing I did has caused this and the blooming thing just plain does not work, the words "I should have bought an Ipad" continue to beat in my head, after all the 8g iPAd2 was only $100 more, I really feel like returning this stupid thing but I suck it back up and fire an email to Arcsoft.  The next morning the reply was that Lenovo bundled the software and I should contact them (Did I tell you I spent 40 worthless minutes on the phone to them during the initial problem state?).  Now I am Livid, I told Arcsoft that it was the full version I paid $2.99 for that is malfunctioning, not the original bundled "Trial" version but of course that was ignored and the generic form letter response was issued.  I have fired off another very firm email to Arcsoft over the issue, no response to date (2 days now). </loud_rant>
    It appears that satisfaction is no matter to Lenovo or Arcsoft, and  theydo not provide what they promise.  I hope this community can help with the problem, If I can't save an edited picture then they deserve to get the blooming thing back.
    Thankx for any help someone can provide,
    Jmayes

    Thanks for the tip on the edit.  I remembered to take the film off the lens.  In almost every review I read and viewed (I researched quite a while b/4 buying) mentioned the poor quality of the camera photos compared to other 5 MP cameras on other tablets.  I just didn't expect it to be this bad.  My neighbor has a Thrive and an Iconia both of which have 5 MP cameras and there is a world of difference even after you upload them to the computer.  It wasn't the 3.2 upgrade that affected the camera.....I think it is just poor quality hardware (most reviewers agree on that).  It is not a deal breaker for me more like I feel cheated.  Having the camera lens so close to the edge is a problem too since it seems to pick up finger prints on the glass covering the lens causing the photos to look drab.
    Atleast they didn't put the earphone jack on the top causing the wire to drap across the screen if you are not careful like one of the tablets I saw.
    By a route obscure and lonely
    haunted by ill angels only.

  • Can I get Camera Roll photos onto my iPad?

    In addition to dealing with that annoying optimizing/syncing over 6,000 photos everytime I sync my iPad with my iTunes, I find that none of the Camera Roll photos from the iPhone that I also sync with the same iTunes comes over.
    When I moved from my iPhone 3 to my iPhone 4, (and when I lost an iPhone 3 and got a replacement), the backup/restore feature worked flawlessly, so I know that a copy of my iPhone photos are on my computer.
    How can I get them over to my iPad?
    (Also, does anyone know an easy way to convert them to jpg and where, specifically, do they live in the iPod Photo Cache folder???)
    Thanks!
    Randy

    The iPod Photo Cache folder is just a temporary folder used for sync. You can delete it and it will be recreated next time you sync.
    "When you use iTunes to sync photos to iPhone, iPad, or iPod, iTunes creates a folder called "iPod Photo Cache" in the top level of the folder you selected for your photos. Picking another folder to sync does not erase the previous iPod Photo Cache folder. Depending on how many photos are being synced, your hard drive could fill up."
    From:
    http://support.apple.com/kb/ts1314
    How have you transfered you iPhone photos to your iPad? The photos I take with my 4G iPod Touch are jpgs when synced to my computer. You need to place your iPhone photo is a single folder and place that folder in the folder you use to sync your photos.

  • TS4425 I can not get all my photos on apple tv.

    I have over 300 photos in photo stream which I can see from my ipad, phone and use to be able to see on apple tv.  Updated apple tv and now can not see but a small portion of them.  Read the article about accepting terms and conditions but I was never asked to accept terms so no improvement

    Photostream in the cloud only keeps photos from the last 30 days (subject to a 1,000 photo limit). When photostream syncs the photos to your device they will stay there until deleted, which means you may well have more photos in your photostream album on your device than there are in photostream in the cloud.
    The consequence of this is that if you turn photostream off and on again on your device, it will only be populated with photos from the last 30 days, which may not be all the photos that were previously in the photostream album on that device.

  • I can not get my ipod to show on itunes i have followed all the procedures in help, what more can i do

    I can't get my ipod touch to show up in itunes, I've followed all the directions it still will not show up. What can I do now?

    I hope you get an answer on this. I am having similar problems. I have lots of music on my Nano and now have a new laptop. How do you move those songs into your new laptop from the Nano.

  • HT4623 Can I get a password keeper app if I dont have IOS

    Can I get a password keeper app if I don't have iOS on my iPad?

    Oh.......your iPad is now out of date and you can't update to the current iOS 7.0.4 because your iPad can not operate the more powerful, operating system.  Many apps are now optimized for iOS 7.0.4, which is why your iPad is telling you you need to update, but again, on your device you can not.  If these are apps you want or need, it might be a good time upgrade to a newer iPad.

  • HT1212 tried to restore my ipod that has been disabled and I can not get it to go into DFU mode I have tried a million times and it will not allow me to. I have done this before to restore other devices am I am not new to this process. please HELP?

    Can not enter DFU mode and I am stuck with a disabled ipod can anyone help.

    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    For MAC or PC
      The Firmware Umbrella - TinyUmbrella

  • I can't remember my Apple ID password or my security question answers. When I try to reset my password it wants to send it to my e-mail address but I can't get the e-mail because I don't have security answers or the password. How do I reset password?

    I can't remember my Apple ID password or my security question answers. When I try to reset my password it wants to send it to my e-mail address but I can't get the e-mail because I don't know my security answers or the password. How do I reset password?

    Alternatives for Help Resetting Security Questions and/or Rescue Mail
         1. If you have a rescue email address or a Security Questions issue, then see:
             If you forgot the answers to your Apple ID security questions - Apple Support.
             Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support
         2. Fill out and submit this form. Select the topic, Account Security. You must
             have a Rescue Email to use this option.
         3. This is the only option if you do not already have a valid Rescue Email.
             These are telephone numbers for contacting Apple Support in your country.
             Apple ID- Contacting Apple for help with Apple ID account security. Select
             the appropriate country and call. Ask to speak to the Account Security Team.
         4. Account security issues almost always require you to speak directly to an
             Apple representative to securely establish your identity as the account holder.
             You can set it up so that Apple calls you, either immediately or at a time
             convenient to you.
                1. Go to www.apple.com/support.
                2. Choose Contact Support and click Contact Us.
                3. Choose Other Apple ID Topics and choose the appropriate topic for
                    your issue.
                4. Follow the onscreen instructions.
             Note: If you have already forgotten your security questions, then you cannot
             set up a rescue email address in order to reset them. You must set up
             the rescue email address beforehand.
    Your Apple ID: Manage My Apple ID.
                            Apple ID- All about Apple ID security questions.

Maybe you are looking for

  • Inconsistency between Bex and Back end

    Hello, I have a query about bex issue. I have few fields in my DSO/Cube which has data showing correctly in the back end but in Bex it shows partial of those values. like if i have something like this: ZField 000000000000000000008 It shows correct in

  • SharePoint 2013 and SQL Always On

    How do I setup SharePoint with SQL Always On. I have two servers SQL1 and SQL2.  I created Windows 2012 cluster and called it MyCluster. I installed SQL Server 2012 SP1 on both servers. I created AlwaysOn group called MyAlwaysOn and added test databa

  • Java in x2-02

    Hello, I have a question about java. Have this phone any MB limits for java application? I have bad experience with samsung c5212, which can use max 0.4MB java apps. Thanks Solved! Go to Solution.

  • How to import PS files IN ORDER in AE?

    Hi! I have a series of complicated photoshop layers which I am going to animate in AE. However, whenever I import the layers into my comp, there are all out of order. I need to figure out a way to fix this, else I will spend hours trying to figure ou

  • Compaq mini 702EA Using win7,32bit, Webcam not working

    Hi  I bought a compaq mini 702EA using win 7 starter and I have been all around Hp website and cannot solve this problem re: cannot get the WEBCAM to work..any help please.