HT4623 cannot get new phone to activate

cannot get phone to activate

It's because the activation servers are being slammed due to the release of iOS7.
The only things you can do are keep trying, or wait it out.

Similar Messages

  • HT4623 cannot get my phone to print to air printer

    After i updated my iphone it does not let me print from my emails.  It tells me I cannot locate my printer.  Any help would be great

    Put the devices in pairing mode.
    Read the Owner's manual for those devices to determine how to put them in pairing mode.

  • I have a problem with my iPhone 4s.  An Apple rep looked at the phone today and determined the phone will have to be replaced.  I am trying to back up my data on the phone to iTunes but I cannot get the phone to power up.

    I have a problem with my iPhone 4s.  An Apple rep looked at the phone tonight and determined I will need a new phone.  I am now trying to back up my data to iTunes but I cannot get the phone to turn on.  I have it plugged into my computer monitor but it just slowly flashes the Apple symbol. Any ideas on how I can get it to power up for the backup?

    Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

  • HT201210 i have a ipone4s and am trying to update to the latest version. There has been a error and now all i can get is a iTunes logo with a connection arrrow pointing up. i cannot get the phone to do any thing.

    I am trying to updated my Iphone 4s and there is a erroe while updating. My phone has now got a iTunes icon with a arrow below it and a picture of a connectione cable below that.  I cannot get the phone to respond to any thing.

    Here's a few things to check
    1. Make sure you are using the original usb cable provided by apple
    2. Try re-installing iTunes preferrably uninstall then install a new version
    3. Try different usb ports
    4. If all goes wrong, install itunes on a different computer and update it on the other computer, then you can always plug it up again on yours and restore your information

  • HT201210 i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me

    i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me

    While YOU may not have attempted to jailbreak the phone, SOMEONE ELSE did.  Error 1015 occurs by attempting to restore a previously jailbroken phone. 
    It's very likely you may NEVER get your phone out of recovery mode and your phone may be rendered permanently bricked.
    Terms of Use of this forum prohibit the discussion of jailbroken phones.  You'll have to scour the internet for a solution to your problem, if indeed one exists.

  • Error cannot get new token due to device offfline state

    I cant download any app from appworld or even cant access into Myworld. Its says "Cannot get new token due to device offline state.(Error id:40760)"
    i reinstalled the appworld but its the same thing happening.Besides i have reset my BBID pasword through email as i forgot that. when i try to access in my mobile's bbid it says"Unable to update Blackberry ID account informtion while offline".
    it seems smthing wrong with the "offline state".Actually whats this thing?. i am using curve 9300 without BES or BIS but with the normal edge internet enabaling apn settings for five months.every thing was fine.but this problem is occuring for two days.my browser and other installed apps working fine but not the appworld.Please Help me....................

    Hi,
    I have the same problem, cant download any app from appworld or even cant access into Myworld. Its says "Cannot get new token due to device offline state.(Error id:40760)"
    I am using Bold 9700  without BES or BIS but with the normal edge internet enabaling apn settings for five months.every thing was fine. But this problem is occuring for two days.my browser and other installed apps working fine but not the appworld.Please Help me....................

  • I cannot get any phone call when my iphone is sleeping

    Hi,everyone. I cannot get any phone call when my iphone is sleeping ( or locked ). After I active my phone, it will show how many call I missed. Does anyone have the same problem with mine? I tried reset, update software, but still not working.

    to put your iPhone to sleep follow these steps:
    1) press the sleep button once - screen will go dark and you'll hear a click.
    2) press home button once - screen will light up with your wallpaper in the background, time, date, etc.
    3) DO NOTHING for five (or so) seconds and then your iPhone will sleep.
    if you receive a call, iPhone will wake automatically. otherwise to wake the iPhone, press the home button - iphone will wake. slide the unlock bar (enter pass code, if enabled) and use.
    to return to sleep mode, repeat sequence (1 through 3)
    doing this will allow calls to come through while Iphone is asleep and prolong the battery charge exponentially.

  • Cannot get new token due to device offline state. Id error 40760

    Hi,
    I have a Blackberry Curve 9380 
    i can't go in my app world, the message says: Cannot get new token due to device offline state id error 40760
    what should i do?
    btw, i'm french
    thanks!

    Hi and Welcome to the Community!
    With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
    1) Register HRT
    KB00510 How to register a BlackBerry smartphone with the wireless network
    Please wait for one "registration" message to arrive to your Messages app
    2) Resend Service Books
    KB02830 Send the service books for the BlackBerry Internet Service
    Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
    3) Reboot
    With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
    See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    If not, then please try this sequence:
    1) Remove AppWorld from your BB
    KB10040 How to view or remove installed applications on a BlackBerry smartphone
    If it requests that you reboot the BB, do so
    2) Do a Batt-Pull reboot (power on, remove battery, wait, insert battery, wait), even if redundant to the one you did in step 1.
    3) Install (on your BB) a fresh copy of AppWorld
    http://blackberry.com/appworld/download
    Again, if it requests to reboot, do so.
    4) Do another Batt-Pull reboot
    5) See if it now works.
    Otherwise, you should contact your mobile service provider for formal support.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • After updating my IOS to 6, I cannot get my phone to shut off and stay off.  I turn it off and it comes right back on.  Is anyone else having this problem?

    After updating my Iphone 4S to the newest operating system, I cannot get my phone to stay off when I turn it off.  Has anybody got any ideas what to do?

    Hello purplechemist,
    I would be concerned too if my iPhone was not turning off.  I'm not sure if you have tried this, but I recommend first trying to reset your iPhone:
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    You can find the full article here:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    If the issue persists after the reset, I recommend restoring your iPhone.  You can find steps for backing up and restoring your iPhone in the following links:
    iOS: How to back up
    http://support.apple.com/kb/HT1766
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • I cannot get my phone to backup to iCloud. Any thoughts?

    I cannot get my phone to backup to iCloud. Any thoughts?

    Thank you so much.... My silly self found the mute button on... Thanks for the helpful info... Have a great night!!

  • Cannot get new ipad to message or facetime using my iphone number. Will only allow messaging and facetime with my email address

    cannot get new ipad to message or facetime using my iphone number. Will only allow messaging and facetime with my email address

    Using FaceTime  >  http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime
    iOS   http://support.apple.com/kb/TS3367
    About Messages
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755

  • With ios8.1 cannot get new gmail or use Safari?

    with ios8.1 cannot get new gmail or use Safari?

    Hello anderson113,
    It may help to force close the affected apps, then restart your iPhone.
    Force an app to close in iOS
    http://support.apple.com/en-us/HT5137
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/en-us/HT1430
    If you're still experiencing issues, the next step would be to restore the device.
    Back up and restore your iPhone, iPad, or iPod touch with iCloud or iTunes
    http://support.apple.com/en-us/HT1766
    Cheers,
    Allen

  • I cannot get new apps on my iPad 1

    I cannot get new apps on my iPad 1

    Ok...... Do you have a question for us? Perhaps you could start by explaining what's happening when you try to download apps. What error messages are you getting? What troubleshooting steps have you already tried?
    Please note that the original iPad can't be updated beyond iOS 5.1.1. Apps that require a later version of iOS won't work on your device.
    Best of luck.

  • I cannot get windows updater to activate

    I cannot get windows updater to activate

    Hi,
    Before we go further in this issue, I would like to confirm what you mean by "I cannot get windows updater to activate".
    Please let us know more details of it as Andreas Molin and Arnav Sharma mentioned.
    Do you mean you cannot get Windows Update to run, you may try the following steps:
    1. Check Windows Update service's running status, make sure it is automatic. If not, change and start it. Please check the below mentioned services:
     a. Background Intelligent Transfer Service
     b. Cryptographic service
     c. Windows Update
    2. Your antivirus software may be conflicting with Windows Updates. You can test this by temporarily disabling your antivirus:
    Disable Anti-virus software: 
    http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software
    3. Use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Windows 7
    http://support.microsoft.com/kb/929833/en-us
    Also, you may follow the steps from the link below to fix the issue.
    Windows Update Not Working: http://support.microsoft.com/kb/555989
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • I cannot get new purchases to sync with IPad - it says my computer isn't authorized - it is How do I fix this?

    I cannot get my new TV show purchases to sync to my IPad.  It says "you are not authorized on this computer"  It is authorized.  How can I fix this????

    Oh, and I'm not sure how relevant or necessary this information is, but the iTunes store on my computer doesn't work either, which led me to buy the music on my phone. I try to open it and the top says "Accessing iTunes Store..." and never gets past like a little bit less than half. I looked at some other discussions but none of the suggested solutions worked.

Maybe you are looking for

  • Radio button and selection screen

    hi my requirement is that if the user enters some particular combination of value in the select options and clicks a particular radio button there should be an error message displayed. 1)  I am getting the error message in the form a dialog box , but

  • Error in assigning role to multiple task

    Hi, We are using BAPI BAPI_BUS2175_ROLE_ASSIGN_ADD to assign role to task. It is working fine if we are assigning different role to different tasks. But if we assign the same role to different tasks in a project, it is giving dump while saving the da

  • Imac 24" dvd-drive doesnt show inserted DVDs randomly, only after reboot (?

    hi i am very aware of this problem as my powerbook G4 had the same issue, although its not a big issue i am worring about. when i insert a DVD sometimes, lets say a commercial Movie DVD, an older burned DVD from 2002 or 2005 or even 2006, my brand ne

  • [exit求助]FB01里怎么自动把明细里某个值copy到另外一个明细里去?

    条件 凭证类型 为DZ并且凭证首项里的科目为u201C99999u201D时候 把凭证第二项里的文本复制到凭证首项的文本里去 这种情况下代入好像用不了 FB01所涉及到的exit里,只发现F180A001的EXIT_SAPLF048_001被调用了 但是那里好像也改不了 FEDI0001 Function exits for EDI in FI F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment F050S002 FID

  • Keeps corrupting disk partition, even new disk

    After 6.5 reliable years, my Macbook Pro (mid-2007 model 3,1) failed to boot, just freezing at the white screen (in Mtn. Lion) even when the shift is held down for "safe boot". Although Disk Utility and Apple Hardware Test found nothing wrong with th