HT4623 Cannot get Some ITunes movies that were downloaded onto an iPad and then removed back onto that iPad. Any hints on getting these back on the iPad?
All 3 Apple devices are updated to the latest versions.
If the movies are no longer available in the iTunes Store, you cannot download them again.
If you have certain content resticted you may not be able to download them again. Settings>General>Restrictions>Allowed Content>Movies.
Any more hints from you as to what you are actually and specifically doing in actual context - that might make it easier to offer help?
Similar Messages
-
Reloaded Itunes on an XP machine. Reloaded because Itunes would not open. Now when I play a movie that is in my library, the movie plays for aprx. 60 seconds and then reverts back to my Itunes library. Does it with all movies in the library, Most where downloaded from Itunes. Any ideas on a cure?
This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
When trying to Airplay from my Macbook Pro Retina, to AppleTv3 it plays for only a few minutes, and then jumps back to the Mac. It seems to do this no matter what I play, music, movies or pictures. I just bought a new router. This could affect it.
I have been playing whole movies before from VLC without problems.
Any Ideas?Welcome to the Apple Community.
Yes it's network issues or settings that cause these types of problems most of the time.
The following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues. -
Every time I move emails from the inbox to another mailbox, then click on any mailbox (the emails are there fine), and then go back to the inbox, the moved messages have returned to the inbox. I have moved them out of the inbox to other mailboxes again and again, but then they keep showing up in the inbox again as soon as I click on any mailbox other than the inbox. Very frustrating.
This has only happened since I installed Mavericks on both my Macbook Pro and my iMac. It happens on both of them.
Any ideas how to fix it?
peterThis may be one of the known issues with Gmail and it's IMAP settings working with Maverick's Mail.
It all comes down to if you have the ALL MAIL folder visible or not via IMAP.
If you do not, then you get the behavior you are describing.
If you do have ALL MAIL visible, then there isn't a problem.
Odd, I know.
Anyway, check out this article on Wired which describes the problem and work around. You may have to click on the NEXT button at the top of the window to advance to the proper gallery image that describes this issue:
http://www.wired.com/gadgetlab/2013/10/mavericks-issues-and-fixes/#slideid-23460 1 -
my sons ipod shows the apple sign and then occasionaly a white screen appears and then goes back to the apple symbol.. He cant get it to turn on.. He has tried charging it.He also held down the sleep/wake button and the home button at the same time to reset it. we need help
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Ok. So my iTunes started acting up a few months ago. ALL of the songs I purchased from the iTunes store stop in the middle of the song and then go back to the begining (I keep it on repeat one song by the way). Please help!!! (Windows 7) I would really like to hear my songs all the way through, but I can't . I tried the "Convert Protected ACC files to Purchased ACC files fix" but it DIDN'T work. I don't know what to do. It does it when I transfer the music onto my Classic too.
What do you mean "doesn't recognize"?
-
When I click on the "Get mail" icon, nothing happens even though I know there is mail. However, if I click on "send" and then go back to the Inbox, the emails start loading. What's going on?
Make sure your Mac's software is up to date.
Click your Apple menu top right in your screen.
From the drop down menu click Software Update. -
I have been trying to install new apps to an iPad that I use with my students. I click on the app, then click the Free button, click install app, enter the password. It will say installing briefly and then kick back to free. This has happened with multiple apps. I thought that maybe it was the schools Internet filter, even though it has worked in the past. I have also tried this on my home Internet and have the same results. Any assistance would be appreciated as I am currently unable to get more instructional apps for my students.
If resetting the iPad doesn't help, try these things.
Quit the App Store app completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work - sign out of your account, restart the iPad and then sign in again. Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>iTunes & App Store>Sign in and then try to download an app again.
If that fails, try downloading something in iTunes. There is free content in there so find something that you don't have to pay for and download it. If that works, try the App store again. -
The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back tot he main iPad screen. Any suggestions on to hoe to fix this? The software has been updated to iOS 5.1.1, and no furthe updates are available.
This is my boilerplate response when app downloads are stalled or in the "waiting" mode. There are a bunch of things here to try.
Tap on the "installing" icon and see if you can pause the install, then tap on it again in order to resume the install.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download and install at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and see if the install resumes.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
This is incredibly frustrating - we had a IPhone 4s that had no problems here for about 7 monts. We have a new IPhone 4s and recently a new IPad 2. Ever since the mandatory switch to using the Podcasts App for iOS based products (my PC laptop works fine), the podcasts will say "cannot be downloaded at this time" and will stream for 30 seconds to a few minutes, then abruptly start over at the beginning. We cannot fast forward ahead properly in the new clunky interface, and the secondary screen where you get to see the "tape player" going through podcast does not skip when you move the timer icon anywhere in the podcast. It is though they are running in parallel.
We are talking podcasts by the BBC, NPR, etc and the Lenovo doesn't have any issues bc the whole system is inside ITunes.
I have looked all over the internet and cannot find a fix, please help.Hi jhyiesla,
Im not sure wether I got you right or not. But my advice/s would be as follows:
These steps help you get rid of old apps you downloaded years ago and you do not use anymore.(Also frees space on your mac after emptying the trash)
1) go to iTunes and delete all applications in it. Make sure to move them to trash! Do not empty your trash yet. Its your backup if step 3 doesnt appear.
2) connect both your devices(one after each other) and make a backup. !!!Dont press the Sync button, press the Back Up Now Button
3) Then it asks you if you want to backup applications as well. Confirm. (This is how apps get transferred manually)
4) Then Sync your devices... The first time it might be, that there are some additional apps loaded to your devices you dont want to.. delete them on your Device (not iTunes) and after that you should be good every time you sync again.
5) now you can empty your trash on your mac.
Further,
- You should regularly connect your devices with iTunes to make sure they are backed up. (Even if you have activated iCloud backup, the iTunes backup is more proper i.e.. Apps)
- If you hate scrolling through a list of apps in iTunes, you can re/install apps directly on iOS not via iTunes. I absolutely never go to the "Applications" section in iTunes. I install and delete apps directly on iOS.
jl -
New W530 Owner - Can I move down to W7 for a while and then come back?
I have a full Windows 7 license and think I would prefer to move down to Windows 7 for a while and have the option to come back to 8 later. My understanding is that 8's key is in the bios.
If I move down to W7 will it install normally?
If I later want to move back to W8 can I install that from any Win 8 Pro install media and it will just recognize the key at that time?
Thanks!http://www.howtogeek.com/133168/how-to-downgrade-windows-8-pro-to-windows-7/
http://www.infoworld.com/t/microsoft-windows/how-downgrade-windows-7-210685
W520 4270CTO i7-2820QM Quadro2000M 1920x1080 Display 16GB RAM 2x240GB Intel 510 SSDs (RAID 0) - BIOS 1.42 - PCMark7:4,568
Samsung Series 9 15-inch NP900X4C-A03US - PCMark7: 4674 -
When I open a website using Firefox it displays the text but none of the graphics. I upgarded to 4.0 and it was temporarily corrected. Now it has reverted to no graphics,
Hi there,
I have the same issue: FireFox is not showing all images on the page.
Noticed this in FireFox 5.0. Now I installed FireFox 5.0.1 and still have the same issue.
The missing images do not even appear in Tools > Page Info > Media.
The images are usually accessed using DIV tag with a CSS class which contains background-image style. Often, when page opens, the DIV is initially hidden, and JavaScript displays it. Sometimes, jQuery.html() adds such DIV tags, and images rarely appear. Sometimes they do, but more often they do not.
If I install FireBug and use Inspect Element to find such a DIV, it is there, it contains the CSS class, the definition of the CSS class contains background-image style. If I click the icon to disable this style, and then click it again to enable it, the image immediately shows up.
Seems to be caused by some optimization which does not detect images like these.
Hope this helps you reproduce it. -
If I leave the apple tv alone, will it turn off by itself and come back to the screen that it was left at
no it will not come back to the screen it was left on
-
Why does a movie or TV show stop during play and then takes you to the main ATV icon screen?
This weekend while watching a movie it stopped and went directly to the main ATV screen? Also while watching TV shows I witnessed the same issue about halfway through each. Also, when returning to the movie or TV show it acts like the first time viewing and does not give you the option to resume playing.
Same issue, just cuts out to black and then goes back to the home screen. Happened about 4 times while watching one TV show. I'm using Software version 6.0 (6646.65)
-
I have some dts cd's that I want to import into itunes on a windows pc and then play back on my apple tv 3 (i think its 3, about 9 months old) to listen to through my onkyo amp via hdmi as dts, when I play back I just get white noise. I have seen lots of old posts which go on about converting files but am wondering wherher at the current time with the latest versions of itunes and apple tv whether this should by now be a virtual play out of the box solution.
I have tried connecting my atv to the amp by optical cable but that didnt produce anything better and am assuming that a hdmi cable should be able to reproduce everything an optical cable does.
Is this something I should be able to achieve without having to recode the files?
Tracks are imported to itunes as apple lossless, have tried setting the atv audio settings to auto and 16 bit, neither works yet I was told some time ago by an apple rep that the atv shoud be able to handle any type of audio as it just passes it to the amp to decode. I am not stupid but not that technical when it comes to audio and bitrates etc so any explaination would be appreciated.
Thanks in advance for any helpWilly, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD) - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
Steven
Maybe you are looking for
-
All the email (over 75) I had imported into my iMac from my PC and which were stored under ON MY MAC in mail have disappeared. They were there for a year. The number 75 appears behind the word "import" but there is nothing there. How can I f
-
Email remittances/Spool saying no data available after payment run
Hi everyone.. Please suggest a solution for me, why nothing is appearing in SOST/SCOT and SM37... Steps: 1) Entered email address in vendor master record. 2) In vendor master record on the bottom made the standard communication method: Email.
-
Urgent Reverse Engineering Hyperion-Planning in ODI fails**
All, using the provided ODI RKM for Hyperion Planning and the step by step document, we have built the HYPN-Planning datastore and tried to reverse eng. on application ( called 'month'). it failed with msg: IndexError: index out of range: 1 at or
-
Using pen tool, how to activate it?
I am just this week upgraded to CS5 from CS3, so some differences. One that has stumped me so far is finding the pen tool. It was readily available in CS3 but I cannot find it in the tool bar or anywhere else. I want to add some points to an object f
-
I recently updated to 2.6 from 2.5 and have been having problems. Initially I thought it was down to my reorganising of my storage (see earlier post about quitting). However I tried loads of different things, including sharing the images in their cur