HT4623 cannot load ios6 on my ipad. capacity is 28.6 gb and i have 15.3 gb available. isn't that enough? help please.
cannot load ios6 on my ipad. capacity is 28.6 gb and i have 15.3 gb available. isn't that enough? help please.
That is more than adequate space available. What error message do you see? Which model of iPad do you have? The iPad 1 can not be upgraded beyond iOS 5.1.1.
Similar Messages
-
I'm sure I'm being a bit dense here but I cannot seem to transfer music of shows I have downloaded onto my iPad with my library.......it syncs app but nothing else! Help please?
Thanks for this. I also found out that all I needed to do was right click on the device and select download purchases! I new I was being dense......thanks again.
-
aperture 3.2.4, macbookpro lion: image disappears after loading from any project; repairing everything on starting app doesn't fix it. Only restarting the computer works. Any help, please? ... in non-technical language please. Thanks
“Hi Kirby, thanks a lot for your answer.
I got one answer, from DMoore, saying:
“Try Safe boot and then restart with only Aperture open. Still doent work write back with more details like Ram, HD capacity/free space. Are these thumbnails or Previews? Have you turned off building previews in AP preferances?
Safe boot http://support.apple.com/kb/HT1564
Starting up into Safe Mode does several things:
1 It forces a directory check of the startup volume.
2 It loads only required kernel extensions (some of the items in /System/Library/Extensions).
3 In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
4 It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
5 It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
6 It disables all startup items and login items (Mac OS X v10.4 or later).
7 Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.”
As I don’t know much about the technical aspects of computers, I don’t really understand the first answer, and it sounds like following it might produce unwanted changes.
But I understand your questions, so I’ll try to answer them;
"loading from any Project" means that I encounter the problem when I’m using a project, possibly after/because I’ve left the Mac on overnight, and/or I’ve made a lot of adjustments, and, once the problem is there, it happens in any other project which I open – the images load then disappear.
I can see images in the Browser, so it only happens in the Viewer(s).
I’m afraid I don’t understand what you mean by: “If you select "Photos" from near the top of the Library tab of the Inspector, does it show you all of your Images?”. I am a newcomer to Aperture, so I don’t know what some of the buttons are for yet, but when I want to look at and adjust my pictures, I import them, as referenced images, then Aperture creates a folder/project in the Library. When I click on that Project (when it’s working properly), all the images appear in the Browser or the Viewers – without me needing to “select Photos from near the top of the Library tab of the Inspector”. I selected it and looked at all the items in the dropdown menu, but none of them seems to offer the option to ‘show all the images’. So I’m not sure how to answer your question except to say that – yes, I can see all the pictures in the Browser or the Viewers (when it’s working properly), but I don’t seem to need to use the Photos button to achieve this.
Did Aperture work before?
Yes it worked ok for a while, but I only purchased it on 24th May.
If I understand correctly, the difference between thumbnail and preview is that the thumbnail is what I see when the “Loading” wheel is turning, and the disappearance of this wheel after a few seconds means that I am now looking at the preview (also, the thumbnail cannot be adjusted).
So I think the problem occurs when the thumbnail has finished loading; the viewer going blank/grey might mean that it is not showing the preview.
But I have not changed the default Preview settings in Aperture Preferences.
My macbookpro details:
2.7 Ghz Intel Core i7
Memory: 8 Gb 1333 MHz DDR3
Hard Drive capacity 499.25 GB
Available 387.36 GB
I have noticed another problem: I cannot apply the same rating to multiple images: following the instructions, I select a group of contiguous (or non- contiguous) images, choose a selection eg “5stars” using the keyboard, but the stars only appear in the last selected image – even though all the images are still showing as selected.”
I hope this helps you to understand more.
Thank you for trying to help me.
Tony -
hello guys i wanted to ask u about my ipad wifi is not turning on and i have tried to reset the network but still is not working please i need ur help
Thank you. I will try your tip. And if it works, I'll give you 10 points . But now its been charging for hours and its still the same . But thank you!
-
'''I cannot and never have been, able to open a file that has been previously saved to hard disk by choosing the print to file option in the print dialogue box. Firefox displays gooblygook even though the file name is an html, Windows Notepad crashes, MS Excel does not recognise the file type. MS Word displays goobblys also when the file has no filename extension.'''
If you use print to file then you get a file that is meant to be send to a printer and that file has all kind of formatting code for that specific printer.
Opening such a file in Firefox or a text editor can only work if you use a text only printer to print the file to, so make sure that such a printer is installed and selected. -
Just upgraded my iPad to IOS5 and when the download was completed, a window said that there was an error and it could not restore. Now I have a black screen with the Apple logo and the circle lines. None of the buttons respond. Help, please!!
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Maybe this will let the iPad reboot and then you may need to restore again but see if this helps to start the iPad first.
-
My IPad is loosing battery life fast and I have shut down my apps
My IPad is loosing battery power fast and I have turned off all apps I am not using
Save Battery
1. Lower brightness (Major)
2. Turn off WiFi when not using
3. Turn off 3G when not using
4. Turn off Bluetooth when not using
5. Minimize use of Location Service; you can turn it off for certain apps
6. Turn off push notification (Major)
7. Fetch new data less frequently or manually
8. Turn off push mail (Major)
9. Auto-check fewer mail account -
I have photoshop cs5 installed on desktop...got new Canon rebel T5i camera...cannot open RAW images...updated and installed plug-in...still not working...help please.
In any event, that camera was first supported by ACR version 7.4 which needs at least CS6 to run. Naturally, all later versions support it too.
Your choice is either to upgrade your Photoshop, or to look for, download, install, launch and run the free, stand-alone Adobe DNG Converter 8.6 on each folder containing your raw Canon files to convert them first to raw DNGs that you can open in CS5.
In no case does an Adobe application belong "on your desktop". The default install location should always be respected and left alone. -
I cannot install the latest version of itunes as I have old versions of bonjour and quicktime. I can't remove these programs either. Help please as I have tried almost everything I have found so far on the the web.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour and QuickTime entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time? -
Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?
Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears. See if that clears the glitch.
-
My little brother disabled my ipad but I know the password. How do i get another chance to type it in? I haven't synched my ipad and I have a lot of things in there that i don't want to loose.
You don't get another chance once it has been permanently disabled. You have to restore it now. If you backup with iCloud, you can restore from that backup and recover everything. If you don't backup with iCloud, you are starting all over again.
If you don't have a computer, you can restore with another computer running iTunes.
Instructions can be found here.
http://support.apple.com/kb/ht1212
You might need to restore using Recovery Mode. You can read about it here.
http://support.apple.com/kb/ht4097 -
I cannot install flash latest player it doesn't get past 25% and I have been trying for weeks.
I cannot install flash latest player it doesn't get past 25% and I have been trying for weeks.
To give you any useful advice, I'm going to need to know more about your computer and browser:
https://forums.adobe.com/message/5249945#5249945 -
My sister has an iPad with iOS 6.1.3 and I have an iPod with iOS 6.1.3 also why does she have Siri and I don't?
Siri requires a 5th generation iPod Touch. Yours appears to be a 4th generation.
-
My Ipad is disabled by wrong password and I have tried to reset and restore a few times with no success. Now I-tunes won't even recognize the I-pad in recovery mode. I need help please.
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
hi I have window 8. My iTunes will not see my iPhone, iPad or Apple TV. Firewall and setting all look fine. The little box that is on the lower right that allows you to pick a device is missing, thanks
Windows 8 has not been officially released nor is it supported by iTunes.
Maybe you are looking for
-
Upgraded to ITunes 6.0.1 and now it no longer plays music on my G4 Cube
Does anyone know the solution to uninstall ITunes and do a completely new install instead of upgrade? Like a fool, I let my ITunes be upgraded automatically to 6.0.1 on my G4 Cube running OS X 10.4.3 and now none of my music will play in ITunes. ITun
-
hi all, I am running a CentOS base VM on top of Hyper-V server. I upgraded PV drivers of Hyper-V in linux kernel 2.6.32 in order to support Windows Server 2012, then i am hitting below issue on Windows Server 2008 when kernel switches from old PV(whi
-
Ok new problem, hope this one is an easy fix. Now that iTunes is up and running, when I do a sync I dont have any thumbnails (or album covers)on my iTouch for music or video. All that shows for video is a grey tv icon and for music the normal blank a
-
Slow startup mac os x 10.6.5 due to update
I have a macbook pro 13 inch (2.4GHz) which was recently purchased. the startup was initially fast, it would take about 10secs to boot but after the update (mac os x 10.6.5) i realised that startup is now even longer. it is now 1min an a half sum may
-
JSPs in a clustered WebLogic 8.1
We've just converted one of our environments from being a single WebLogic 8.1 instance to a clustered set-up (2 nodes). Previously, when I updated a JSP in a web-app deployed into WebLogic it was automatically re-compiled when the JSP was reloaded in