HT4623 Data card not working after 6.1 update

After updating my ipad 3 the data card has stopped working.  This happened before.  With the last update,   But this time I can't seem to fix it

I am having the same problem it is saying that i have headphone plugged in when i dont. i Just did the update on monday and now i am having this problem!

Similar Messages

  • SB04100 Sound Blaster Card not working after computer rebuild

    =SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
    Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
    Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

    Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
    Everything works for now -- I'll be glad to get this particular computer out of my house !

  • HT4623 Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update?

    Anyone having trouble with App Store install and cloud store buttons not working after 6.1 update? I go to install an app. I hit install and nothing happens. About a minute later it asks me for my password and then it does nothing. The install button goes back to saying install. However the app shows up in my installed list and in cloud but no app installed.

    OK - I found a helpful post - closed app store app and under Settings/General/Date and Time I reset the date and time by switching off "Set Automatically" and then switching it on again. Went back to App Store, launched it and Updatesseems to be working again.
    Go figure? Logical, No!

  • SD Card not showing after Mountain Lion Update

    This matter has been discussed for some time now in
    Apple Support Communities > Desktop Computers > iMac (Intel) > Discussions
    SD Card not showing after Mountain lion Update
    Since the update to Mountain Lion, the SD slot does not show up in Finder.
    Someone gave a fix using the killall in Terminal, and that worked only once.  I have not been able to get that fix to work again.
    The only saving grace for me is that my SD Card us is always from my Nikon camera, and Nikon ViewNX 2 software is able to see and read from the card.
    Killall may have worked partially in that I no longer get the error message telling me that I have removed the SD card improperly, and need to dismount it first.
    However, Finder still cannot see it.

    BrianForbesColgate wrote:
    Thanks, Barney ...
    Those are basics ... Been there, done that, first.
    Then you should hava posted all the troubleshooting you already accomplished.
    Does the card show up in System Information? Or is that another one of the "basics" you've already looked into?
    Does it show up in Disk Utility? If so, have you tried formatting it there to determine if it is a formatting problem?

  • HT201366 CAC readers not working after installing security update 2013-003?

    Is anyone else having problems with CAC readers not working after installing security update 2013-003? CAC required websites are causing safari and chrome to crash.

    For CAC issues, see:
    MilitaryCAC's Mac OS X support landing page
    Please follow these directions to delete the Mail "sandbox" folder.
    Back up all data.
    Triple-click the line below to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

    - Try resetting the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Download/install a new app
    - Restore from backup
    - Restore to factory daults/new iPod.

  • Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver

    Hi Tokha,
    If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article - 
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Wifi not working after latest iOS update

    wif not working after latest iOS update 7.0.4.  Any suggestions?

    Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

  • HT4623 Wi-fi not working after updating to iOS 6.0

    My wi-fi is not working after upgrading the iSO to 6.0

    Hey my wifi quit about a month ago,  and im running 5.1.1.  I thought the fix would be to download 6.0,  I guess not
    I have a 4s, first it was charging problems now this...argh!

  • IPad Mini Retina 4G is not working after iOS 8 update

    I have an iPad Mini Retina Cellular, and after the update to iOS 8 4G network data is not working any more. Near the carrier name 4G appears but when i try to access Internet i get this message: Could not activate cellular data network You are not subscribed to a cellular data service. On 3G Internet works fine.
    Other problems: Multitask Gestures are not working always, only after i swipe down notifications

    Hello WinGoWithBush,
    Thanks for using Apple Support Communities.
    In order to resolve this issue where your iPad is not charging, I'd like you to please ensure you are using the correct power adapter as depicted in the support article below, as well as making sure the cord and outlet you are using are both functioning.
    iPad: Charging the battery
    Take care,
    Alex H.

  • Apple TV does not work after trying to update software. Main light keeps blinking and on the screen shows itunes icon and a usb cable. What does that means?

    My Apple TV does not work after trying to install the new software update. The main light keeps blinking rapidly and on the screen it shows the itunes icon and a USB cable. What does that mean?

    The Apple TV is in recovery mode. Try to restore the Apple TV. Follow the link for instructions on the restore process.
    http://support.apple.com/kb/HT4367

  • HT6154 rear camera on iphone 5 not working after ios 8 update why?

    My iPhone 5 rear camera is no longer working after ios 8 update its just black I can see the flash choice the hdr and the timer but other than that it is a black screen

    Hi there fjci2003,
    You may find the troubleshooting steps in the article below helpful.
    Get help with the camera on your iPhone, iPad, or iPod touch 
    You see a closed lens or black screen
    If you see a closed lens or black screen when you open the Camera app, try these steps:
    Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
    Force the app to close, then open the Camera app again.
    Restart your device, then open the Camera app again.
    If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
    -Griff W.  

  • Help for date field not working after upgrade

    hi experts,
    In our BSP application for a page we had an inputfield (date).
    Onvaluehelp for input field we were calling the saphelpdate function.
    however after upgrade this functionality is not working properly as no pop up comes after clicking on the icon.
    we have upgraded to SPS 16 recently.
    please help me.
    regards,
    Arvind.

    Hi, I try upper case but nothing happen. This is all my code by far, I hope you can help me:
    DATA: BEGIN OF T_PCONT OCCURS 0,
          PCONT LIKE ZPSPERMISOS-PSOBKEY,
    END OF T_PCONT.
    DATA: BEGIN OF T_FIELDS OCCURS 0.
            INCLUDE STRUCTURE help_value.
    DATA END OF T_FIELDS.
    DATA: BEGIN OF T_VALUES OCCURS 0,
          VALUE(60) TYPE c.
    DATA: END OF T_VALUES.
    DATA: N TYPE i.
    SELECTION-SCREEN BEGIN OF BLOCK  b20 WITH FRAME TITLE text-b02.
      SELECT-OPTIONS:
        P_CONT FOR  ZPSPERMISOSH-PSOBKEY OBLIGATORY NO-EXTENSION NO INTERVALS,
        P_INT  FOR  ZPSPERMISOSH-PARTNER OBLIGATORY NO-EXTENSION NO INTERVALS,
        P_FEC  FOR  ZPSPERMISOSH-ZFINICN NO-EXTENSION NO INTERVALS,    
        P_RAZ  FOR  ZPSPERMISOSH-ZRAZONFINIC NO-EXTENSION NO INTERVALS.
    SELECTION-SCREEN END OF BLOCK b20.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_CONT-LOW.
      PERFORM P_HELP_P_CONT USING P_CONT-LOW.
    *&      Form  P_HELP_P_CONT
    FORM P_HELP_P_CONT  USING P_P_CONT.
      DESCRIBE TABLE T_PCONT LINES N.
      IF N EQ 0.
        T_FIELDS-FIELDNAME  = 'PSOBKEY'.
        T_FIELDS-TABNAME    = 'ZPSPERMISOS'.
        T_FIELDS-SELECTFLAG = 'X'.
        APPEND T_FIELDS.
        CLEAR T_FIELDS.
        SELECT PSOBKEY FROM ZPSPERMISOS
        INTO  TABLE T_PCONT.
        SORT T_PCONT BY PCONT.
      CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
        EXPORTING
          CUCOL        = 10
          CUROW        = 1
          TABNAME      = 'T_PCONT'
          FIELDNAME    = 'PCONT'
        IMPORTING
          SELECT_VALUE = P_P_CONT
        TABLES
          FIELDS       = T_FIELDS
          VALUETAB     = T_VALUES.
    ENDFORM.                    " P_HELP_P_CONT
    Edited by: J. Garibaldi on Nov 25, 2009 11:14 AM
    Edited by: J. Garibaldi on Nov 25, 2009 11:16 AM

  • Audio / Sound Card not working after Soundblaster.USB.Audio.Support.pkg

    Ok, first - confess - it was stupid. I installed the Soundblaster.USB.Audio.Support.pkg package, which i downloaded from the internet, to make the harman Kardon Soundsticks (USB-Version) working, as nothing happened when plugging them in.
    First, it ruined the mouse working after reboot and also disabled the internal sound card, not even as device available anymore. I fixed the mouse problem by installing IOUSBFamily-281.4.0-log(PPC).dmg
    How can I make the sound card be available and working again ? I also updated to 10.4.11. Did not help ! Can you ? Thanks !

    Welcome to the Apple discussions.
    First, look in system preferences, accounts, and for your login account look at login items to see if there is a Soundblaster USB module that is loaded when you reboot your system. Delete it if there is one.
    If you updated to 10.4.11 by software update, download the combo update from http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eppc.html . The combo update is a complete update for all updates to 10.4, and installing the combo sometimes fixes odd things.

  • HT4623 Phone does not work after update

    After update 6.1.4 phone cannot find signal to function even though wireless works.  Cannot reload update...says it's up to date.  Reboot nothing,  Reset, nothing.  Really beginning to dislike this piece of junk.  Just need a phone that works.

    Remove sim and insert it again.
    Did you restore form backup or restore as new?

Maybe you are looking for