HT4623 do i have to hit 'restore' after an update?

do i have to hit 'restore' after an update?

No unless something goes astray during the update and you have to recover by restoring from backup

Similar Messages

  • HT4623 iPhone is asking me to restore after ios update, did I loose everything?, what do I do??

    I updated itunes today (after I did a backup of my daughter's iphone), when we went to do the ios update on the phone, all looked ok and install began. Now it is asking to restore to factory, and nothing is showing up on phone at all.  What can I do?.....Did we loose everything?  Itunes looks normal. and library is there.

    a large iOS update requires you to restore from your backup. If you did the update through iTunes, it should've automatically created a backup, so just plug it in and restore

  • I-tunes does not recognise ipad to restore after failed update to ios 5

    i-tunes does not recognise ipad to restore after failed update to ios 5. Connected i-pad to update to new ios 5. Back-upp went fine but update failed and now i-tunes does not recognise the devise and i-pad will not work so I have no known way to restore.

    Copied from that article.....
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button:
    Are you releasing the home button when you see the connect to iTunes screen? Does iTunes start on its own? If it doesn't - start iTunes yourself.
    Also copied from the article.....
    5. If necessary, open iTunes. You should see the following "recovery mode" alert:

  • I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

    I tried updating iphone 6 to 8.1.3 But the phone went dead. I have tried using restore options - both update and erase, but the process stops when it tries to update Iphone firmware.

    Put your phone in DFU mode,
    Hold the Power Button (3 secs)
    Continue holding the power button and also hold the home button (15 secs)
    Release the power button while continuing to hold the home button (10 secs)
    Your device should prompt with the "Connect to iTunes Screen"
    Restore.

  • Why bookmarks have 4 spaces added after the update from FF3.6 to 13?

    Why bookmarks have 4 spaces added after the update from FF3.6 to 13?

    Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    You can also try to repair the places database with this extension:
    *https://addons.mozilla.org/firefox/addon/places-maintenance/

  • Restoring after firmware update - Ways :)

    Hi All,
    Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware.  I would like all to discuss to come up with some ways to restore their applications after firmware update.
    Before updating firmware
    Customer can backup his phone using Nokia PC Suite's Content Copier application.
    He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
    For his Contacts he can sync with pc suite supported sync applications.
    Messages he can store in Memory card and he can make a backup of memory card in PC.
    If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
    For Music he can use Nokia Music Manager or Nokia Music.
    Once after updating his firmware, if he is unable to restore he can get those from above said applications.
    If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
    Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

    Hi,
    If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
    you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
    Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth.  Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
    Its better to skip memory card backup while backup-ing other Phone data for faster backup.  Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
    Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
    Hope this could help
    I welcome our experts to add more details related to this topic.

  • Cant restore after installing updates how do I change the home user/account

    I installed 3 updates, opps, this morning, and when I restarted the computer it had reverted back to old setting from 2004. I purchased the computer from a friend, and had worked hard to remove his stuff, now my settings mail etc are gone and the old stuff is back. How do I restore the computer to what it was before the updates took it all off? also how do I change the home from his back to ours? sorry, I am new at this and very very frustrated with the mac so far.

    Changing the home folder name caused the problems, not the updates. The problems won't show up until you restart, which, in your case, was just
    after the updates. See:
    <http://docs.info.apple.com/article.html?artnum=107854>
    <http://docs.info.apple.com/article.html?artnum=106824>
    When you get a used computer, it is safest to erase the disk (with zeroing option), then reinstall OSX, update it, and get the latest versions of all the software you need. You should also run Extended Tests from the Apple Hardware Test disc to be sure there are no hardware problems.

  • HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • HT4623 My iphone5 keep restarting every hour after i update it with the new ios 7.1.1.Do u know why?

    My iphone5 keep restarting every hour after i update it with the new ios 7.1.1.Do u know why?

    have you ever tried itunes on your friends pc or someone if you have trusted that pc in your iphone then you can

  • HT201413 my ipad mini shows usb connected to i tunes only, and it cannot be switched on . and it fails to be restored after IOS6 updates

    my ipad mini shows usb connected to i tunes only, and it cannot be switched on . and it fails to be restored after IOS6 updates

    I found the solution here, it's really works!
    I'm glad I found this site.
    http://ituneserrorfix.blogspot.com/2013/11/how-to-fix-error-4013.html

  • HT4859 How to Restore after phone update

    How do I access and restore my phone after this update.

    It is the same process like under iOS 5. Restore and then choose the backup during the set up process.

  • TS3694 iphone wont restore after system update

    I cant restore my iphone after i update OS. error occurs in i tunes (3194)
    My iphone diisplay is connect to itune

    http://support.apple.com/kb/ts4451

  • HT4623 my iphone wont accept my sim after the update , and so it don,t complet turning on

    my iphone wont accept my sim after the update , and so it don,t complet turning on .

    It hasnt been jailbroken has it?

  • Have tried to change session restore after latest update

    First, I'm a very novice user when it comes to anything related to Firefox. I have basic understanding of my profile, but certainly can't get into any code.
    I've also looked at previous threads on this topic and have tried the solutions. Those have not worked. I have taken some screenshots to help describe what I have tried:
    I went to this profile folder. In it, I changed "sessionstore.js" to "sessionstore.old". I then went into several of the subfolders, "sessions", "sessionbackups", and "sessionstore-backups". Each one had files which were timestamped from before this morning. I copied them, then pasted in the folder shown in the image, renaming to "sessionstore.js". When I did this, I had firefox closed. Each time I reopened firefox, and restored previous session, the session which restored was the one I opened this morning. Is there something about this newest update which I need to do differently? Thanks

    The session had 4 differnet windows with many tabs. The session deleted immediately after the newest update of Firefox.
    And I don't have a lot of interest in going through my history to find all the tabs as they were opened over the course of a cpl weeks. I would open them, then go back for reference but not actually click on them.

  • I now have to hit enter after clicking on a URL drop down site (never had to do this before) what do I change so it was automatically send me to the URL without hitting enter (like it always used to)...?

    just in the last couple of days this changed, it used to be a 1 click and send you there process on this drop down list of the sites I go to most often. How do I change things so it's back to the way it used to be...

    Do you still have the plugins enabled (Tools > Add-ons > Plugins) that are used for that streaming?

Maybe you are looking for

  • Po list showing the total amount with advances given & open GR quantity

    Hi Gurus, My client need to know the list of total p/os showing its gross total amount only (& not with the line items) with the advances rendered to them & its open GR quantity against total qunatity mentioned. I hv tried in ME80FN, ME2N, ME2L ME2M.

  • Another crash report

    hi all, i keep having these error logs since my workspace is getting hotter in these summer days. im guessing that it's the CPU. I'll be so appreciated if you can say something about it. my macpro config is here,   Model Name:    Mac Pro   Model Iden

  • My iPhone and iPad air 2 won't share messages

    MMy iPhone and iPad air 2 won't share messages. I can't find where to enter my phone #

  • Replicate Tables as Staging Tables in a DWH

    Hi We are in process of building a Data Mart, for the staging area we are considering to use GG as the Change Data Capture tool. The idea is in the source (OLTP Database) we have a table called T1, this table has no PK and it's partitioned by day, ge

  • How to Install and configure Oracle Jinitiator

    Before runing Forms9i i start oc4j and when i execute form it shows me error and ask to install Oracle Jinitiator at the same time on oc4j command window show configFileName:G:\ORACLE\ORA90/FORMS90/SERVER/formsweb.cfg testmode: false