HT4623 e while updating iOS. When connected to PC & iTunes get the message in recovery mode, must restore. I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.

iPad 2 froze while updating iOS 7.0.4. When connected to PC & iTunes get the message in recovery mode, must restore. I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.

Sorry if we didn't get to your question fast enough; we are all volunteers doing this in our spare time. Try the steps in this article. If you're unsuccessful, you'll need to take your device to the Genius Bar for an evaluation.
http://osxdaily.com/2010/12/04/ipad-dfu-mode/

Similar Messages

I have an ipod touch and Itunes does not recognize device. What can I do?

I have an ipod touch and Itunes does not recognize device. What can I do?

See:
iOS: Device not recognized in iTunes for Windows

TS1538 I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.

not recognized by anything: http://support.apple.com/kb/TS1369
recognized by windows, but not itunes: http://support.apple.com/kb/TS1363
solving the problem if the above does not work:http://www.instructables.com/id/What-to-do-when-iTunes-does-not-recognize-your-i Po/step1
(make sure you go to the next slides.

Been trying to use an external memory card reader with my macbook air- connecting via usb port, air does not recognize device nor the microSD card from my gopro - help

Been trying to use an external memory card reader with my macbook air… connecting via usb port, air does not recognize device nor the microSD card from my gopro … help

Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.

IMovie (and iMac) does not recognize device(s)

Hello and thanks for reading. I know this topic is like beating a dead horse but this one is unique. I'm a professional editor and I couldn't figure this out so any help would be appreciated. Here's the play by play:
I edit using FCP 5.1.4 and have for years. I've had the same set up running for years and do high volume editing.
I have a chain of 4 Lacie drives, all connected by firewire.
At the end of that string, I have my tape player for capturing footage, a Sony GV-HD700, which then goes on to the TVs, DVD players, etc.
Also the end of that string, I also have a disc burner for making DVDs.
So it goes: iMac > Lacie #1 > Lacie #2 > Lacie #3 > Lacie #4 > Sony tape player & DVD burner > TVs, VCRs, etc.
Yesterday, I was in a rush and the DVD burner was going slow so I unplugged it from the end of the string of Lacie drives and plugged it directly into the back of the computer to see if it would burn faster.
It didn't, so I plugged it back into the end of the Lacie string.
At that point, Lacie #4 became unrecognizable to the computer and therefore so was the tape player, which is further down the chain.
When I plugged the tape player high up the chain, into Lacie #3, it still was not recognized.
I plugged the tape player (Sony GV-HD700) directly into the back of the computer...still not recognized.
I took the Sony GV-HD700 into our other editing bay and it was still not recognized.
I pulled out my camera (Sony HDR-FX1000) and plugged it directly into the back of the original computer...recognized just fine.
I plugged Sony HDR-FX1000 camera into the back of Lacie #2...recognized just fine.
I took the Sony HDR-FX1000 camera into our other editing bay...recognized just fine.
I have a big deadline so I said "Screw it." and was just going to capture from the camera for the time being.
I reset the Lacie drive chain, plugged the Camera into the back of Lacie #4 (just like the original setup) and BANG: Lacie #4 and the Sony HDR-FX1000 camera was not recognized.
I plugged the Sony HDR-FX1000 camera directly into the back of the computer...still not recognized.
I took the Sony HDR-FX1000 camera into our other editing bay...still not recognized.
I thought it might be a Final Cut Pro issue so I pulled up iMovie and it does not recognize any device connected to the computer even though I'm looking directly at it plugged in.
The entire iMac has lost the ability to recognize devices that I've used for years. I've now lost the ability to capture footage and I'm running out of time. It's almost as if the devices were getting infected by one of the Lacie drives (I think Lacie #4). Is that even possible? Has anyone ever heard of something like this? I don't know if it's something I need to change on the iMac to recognize them again, or if it's a setting on the device to reset the connection, or if somehow the Lacie drive corrupted the devices and made them unrecognizable to iMacs.
It's very, very weird.
Thanks for your help.
27" iMac (2009)
OS X 10.8.5
Final Cut Pro 5.1.4
Tape player: Sony GV-HD700
Camera: Sony HDR-FX1000
I've had this setup for years so I don't know what type firewire it is.

See:
iOS: Device not recognized in iTunes for Windows

Updated ituneson desktop and does not recognize devices

updated itunes on desktop and does not recognize ipod nano or touch

Message Edited by Crepuscular on 03-03-2009 04:08 PM

Windows 7 does not recognize device

I have been successfully connecting my 8330 to a desktop PC running XP for quite a while. The device sw is v4.5.0.175. I recently got a new Lenovo T410 laptop, running Windows 7. I have downloaded the DM software (v5.0.1) and verified that my device SW is up-to-date, but the laptop is still not recognizing that the device is connected (via USB). I've tried it in all the USB ports on the laptop, and also followed all the steps detailed in KB13146, with no luck. I can't find anything in any of the forums that reference Windows 7. Can anyone provide help to resolve this problem?
Solved!
Go to Solution.

Hi and Welcome to the Forums!
Here is the list of troubleshooting atricles...hopefully something will be useful:
http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/Tips-for-getting-BlackBerry-Deskt...
KB02640 Troubleshooting USB connections
KB15486 Top 10 BlackBerry smartphone and BlackBerry Desktop Manager troubleshooting tips
KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
KB00019 No PIN displayed in BlackBerry Desktop Redirector
KB10938 "USB charging current is insufficient" appears on the BlackBerry smartphone
KB01451 How to turn on advanced synchronization logging if a wired synchronization fails
KB19717 The BlackBerry smartphone is not detected as a USB Mass Storage Device when connected to a computer
Also, check that you are using only root USB ports...no hubs (sometimes the front-side ports are hubs...use a rear USB port). And make sure to try disabling USB power management in your system configuration (Device Manager).
Apologies in advance if this is redundant -- there's no way to be sure if you've already seen and tried these. I can attest that DTM does indeed recognize a BB under Win7...mine is exactly so.
Hopefully something there is helpful!
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My 8GB Ipod touch is stuck at the connect to itunes screen, and when I plug it in my itunes does not recognize it, and a box appears that says usb does not recognize device. How can this be fixed?

How can I fix my ipod coming up as USB cannot recognize device?

Did you find a solution?
My touch is doing the same thing.

Have a mac mini. Just got a external HD. I want to store my itunes media on my external HD and play back on Windows XP laptop. My laptop does not recognize the HD. Only recognizes the empty partition I created on my mac when I partition the drive. What's

I have a mac mini-snow leopard. I recently bought an external HD. I want to use part of the HD to back up my mac via Time Machine. The other part I want to use to store my Itunes and other media such as movies with VLC so that I can take the HD and play it back thru my windows XP laptop. The problem is that my laptop does not see the part of the external drive that has my mac info stored on it. Only sees the drive ( as drive E ) with zero data that was created by me when I partitioned it on my mac. I partitioned the drive in two. One partitioned under GUID for mac. The other part under exfat for windows. Any suggestions on why my XP laptop cannot view the mac info on the HD. Thanks.

DBG413 wrote:
Any suggestions on why my XP laptop cannot view the mac info on the HD.
you'll have to install e.g. MacDrive or HFS+ for Windows on your winsloth machine.

ITunes does not recognize devices

I just upgraded to the new iTunes and now it won't recognize any of my devices. Whenever I try to go into the preferences area, it freezes up. I have deleted and reinstalled iTunes with the same result, also happens with new Windows XP login account.

I am having the same issue and already went through the community to try and find a solution with no joy. I have even tried putting my iPhone 5 in DFU mode and recovery mode and still had no joy.
Hopefully someone might come up with a solution and post it as I have had great help here in the past.
Thank you.

Wifi sync does not recognize device, unless I rename it.

Wifi sync with my iPhone 5 was working fine. Then, out of the blue, it stopped showing up in iTunes. I tried all the trouble shooting I would find here and on Google and nothing. Then I renamed it from "Marcelo's iphone 5" to simply "iPhone". Then it showed up! I tried renaming it to "Marcelo's iPhone" and it still showed up. So I decided to try the original name and changed it back to "Marcelo's iPhone 5" and it disappeared again... Why?
I want it named "Marcelo's iPhone 5" and nothing ele. My iPad is named "Marcelo's iPad 2" and it works fine. I want all my devices to follow this naming structure.
How can I make iTunes forget all my wifi sync devices so that I can name my devices whatever I want and still have it sync over wifi correctly?
I'm using iTunes 11.4 on a mid 2012 13" MacBook Pro
My iPad 2 and iPhone 5 are both using iOS 8.0.2

iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing - http://support.apple.com/kb/TS4062
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X - http://support.apple.com/kb/TS1591
Device not listed immediately after upgrade - https://discussions.apple.com/thread/6573744 - try restarting
LincDavis July 2014 post on resetting sync services when iTunes not responding - https://discussions.apple.com/message/26308435#26308435

HT201263 cannot download latest itunes, screen shows apple logo, slider does not appear, battery doesn't charge, cannot connect to itunes...

unable to restore/reset/connect to iTunes. Apple logo/low battery, slider does not appear....HELP!!!!!!!!!!!!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I recently dropped my phone and my screen will not light up. The sound is still working, but no screen. My lock button does not work either. HELP!!

The screen is not cracked, it just wont light up. Is there any way I can get it to come on? The nearest apple store is 3 hours away!

If your iPod Touch, iPhone, or iPad is Broken
Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
You will find respective repair costs in the appropriate link:
iPod Service Support and Costs
iPhone Service Support and Costs
iPad Service Support and Costs
There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
1. iResq or Google for others.
2. Buy and replace screen yourself: iFixit

HT4623 frozen while updation ios 7

Try t update to new ios 7 and it has been pluged in to pc for already 5 hours
it remains frozen on the screen you see th apple and the white line at about a quarter done
but it remains there since.

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

Each morning I get a notice to download a Firefox security update. When I click install, I get a message saying Installing Firefox and Connecting to the update server. It never connects; the progress bar just spins all day.

Since shortly after installing Firefo 5 I get this message every time I start Firefox. A dialog box comes up that says Installing Firefox, followed by a spinning progress bar, followed by "connecting to the update server." It never progresses past this point and will stay this way indefinitely until I close the Window.
Also since installing Firefox 5, the program crashes at least once or twice a day and I have to quit and restart. Don't know if there's any relationship between the two issues.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

HT4623 e while updating iOS. When connected to PC & iTunes get the message in recovery mode, must restore. I have followed the steps to restore and still have the iTunes screen showing and iTunes still does not recognize device.

Similar Messages

Maybe you are looking for