HT4623 error 4013 and 21 on my ipad 2 after the new software upgrade. ipad is not usable anymore. please help!!!
Hello There,
please help, I have been trying to get my ipad to work again for hours without luck.
After running the new software update on my ipad 2, I started having issues; device turned off by itself, apps couldn't be downloaded, etc (however it was at least working).
Being frustrated with the newly born issues, I decided to restore the ipad, hoping that would solve the issue, however I ended up with the black screen telling me to connect to iTunes and when I connect and go for restore, I get error message 4013 and 21. I tried re-installing iTunes, upgrading my opp system, but nothing,
Please help!!! Very annoying!!!
Thx
You say "USB can't be the issue...". I disagree. There are thresholds, etc. Maybe the iPhone passes some threshold, but the iPad does not.
You might reboot all devices. If that does not cure it, then check the TS3694 article I attached above.
Similar Messages
-
1. I did NOT want Yahoo toolbar, yet I cannot get rid of it!
2. need to change new window opening from tabs in one window to multiple separte windows.
3. Somehow BING became my default page. How to change back to GOOGLE?
Also I am using the 3.6.19 version and do NOT wish to upgrade to the newer terrible version. Please help for 3.6 thank youThanks
was able to solve all issues aside from upper right search box is BING and not google. How do I change that? -
I am not able to delete voice mails after the new software upgrade
Today I downloaded the update for my iPhone. I am not able to delete voice mails. When I try to delete them the screen freezes and I need to get out of the screen in orders for it to unfreeze. I tried hard resetting and that didn't help?
It is in privacy settings/ general/restrictions then down to privacy
-
Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.
If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
This should take all the music off your phone .Then you can resync the music back on to it.
If this doesn't work maybe a restore to factory settings and start from scratch is the way to go -
My Ipod is stuck in recovery mode with the plug in to itunes thing on the screen I tryed to restore it but I keep getting a error 28 and I tryed to do the reset thing but it did not work what do I do?
Hi,
You could see if this helps...
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
DFU Mode
Open iTunes and Connect the iPod to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
How do I find and manage my iPad on the new iTunes? It's not there.
How do I find and manage my iPad on the new iTunes? It's not there.
You can have the 'classic' view by clicking on View - Show sidebar. In the new view, your iPad will have a link on the upper right.
-
After the new update my ipad4 will not do a full recharge even when turned off overnight and the battery goes flat it 2 hours it is driving me crazy as I had to stop all apps but still not helping but my iPhone 5 is great no troubles at all HELP
Do you place the ipod in the dock during the night? I did this once and the other day the battery was almost empty because it kept on playing after it rested in the dock.
Here is more info about battery life and exchange program: http://support.apple.com/kb/HT1322
and http://www.apple.com/support/ipod/service/battery/ -
I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?
All the information that I had input on Quicken is gone. I have to have the external hard drive that I use to back up to be able to use quicken now. It is as if it was erased from the laptop hardriveTry repairing permissions. My favorite way is with a utility called AppleJack. Info and download here. It's free. It only works when you boot in Single User Mode. When restarting or booting, hold down the Command key and S keys.
You will get a very different startup screen that looks like the Terminal app has hijacked the screen. Just let the lines of text scroll by. When that happens you will get a text entry prompt. Type in "AppleJack" without the quotation marks.
A DOS looking menu will appear. Choose 1 or d to run Disk Repair. If you get a message that Disk Repair found and corrected errors, run it again. Repeat until you get the "your disk appears to be ok" message. This rarely happens with my experience, though. This does the same thing as as booting from an external drive and running Disk Utility's repair. Only, no external drive is required!
Next, choose 2 or p to repair disk permissions. This will take a little while. AppleJack warns that it will take up to an half hour to run repair permissions. It'n never taken more than about ten minutes for my MacBook Pro.
As permissions are repaired, you will see each repair scroll on the screen. When done, the menu returns, choose q to quit. Then at the prompt, enter "exit" without the quotes. Your MacBook Pro should restart into Mac OS normally after this.
Hope this helps. -
I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!
You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
you can download the itunes http://www.apple.com/itunes/ here
then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org -
Hi there,
Wondering if you might know? I don't have enough space to update the new software on iPad. So my facetime isn't working anymore, this is prob why. Seems I have to delete like all the games/apps we have to do so. Will I lose the progress data/levels in the games? But how do I back up the games data?
Please help. Scared to delete them to update and then not have the space to restore them and if I get them again will the levels/progress be gone?
Thanks RachelConnect your device to iTunes and do the update through iTunes. Using a computer takes much less space on your device than doing the update on your device.
-
SInce three weeks ago, exactly when I downloaded the new software upgrade to solve the battery short duration, I started to have problems with my iphone, every morning appears a SIM error and I have to reset the device to get internet signal. And then I have to do teh same every 3-4 hours because the sim error appears again! I brouth the device to my phone company ( telcel) but they cannot do nothing to fix this. They told that Apple know about this, because it is happening to many people. So, we all are waiting a new upgrade SOON PLEASE!!!
Hola Salvador, presento el mismo problema con la tarjeta SIM, cada mañana aparece el aviso y en ocasiones por las tardes, es un verdadero dolor de cabeza. ¿Qué fue lo que hiciste en telcel?
Pienso ir el viernes a ver qué solución me dan. Gracias. Espero tu respuesta.
Saludos -
I want to use an old iphone as an itouch and don't have the sim card anymore (cut it to fit into 4G) and I just updated to the new software.... How do I reload the phone with apps and music?
You'll need to get a SIM card. It can be an old one.
-
I have an iPhone 4 and I can only get the audio in AirPlay/mirroring but no video! Please help!
ktrow,
We are going to get you up and running with all picture text messages. Have you ever been able to receive picture messages in a group text before? Can ou please check some settings for me. Let's go into Settings, Messages, and is MMS Messaging swich green? How about the Group Messaging switch? If they are green, go ahead and switch those off for a few seconds and then turn them back on. Then re-try the picture message. One last thing, you can also try to reset the network settings. Settings, General, Reset, Reset Network Settings. Please keep us posted.
KevinR_VZW
Please follow us on Twitter @VZWSupport -
Since I have down loaded the new software my wifi does not work. I have been to a apple store and they said its a hardware issue. My phone was fine before the down load.
What is your technical support question for these user to user technical support forums?
-
My Ipad was working perfect, until I updated the new software. When I finish downloading it I wanted to update the IPad, The process stop and the iPad went to recovery mode. I tried to restore but the error 3014 comes it.
I change USB cables, I change Internet access such as wire-less and Ethernet, I tried with another Itunes in a different computer, I tried to create a new user in my computer and give it a shot and all fail to work.
If anyone has a great solution please help.
Thanks a lot
AleSee this Discussion...
https://discussions.apple.com/message/19634919#19634919
Maybe you are looking for
-
Multiple itunes accounts issues...
I have an itunes account under my username/password, my wife has a separate account under her username/password. Can someone help me understand why the exact same information (songs, playlists, movie list, etc) pulls up on itunes regardless of which
-
Hi I'm trying to add a new button to a form, here is my code: objForm = SBO_Application.Forms.GetForm("992", "1") objForm.Items.Add("btnHelp", BoFormItemTypes.it_BUTTON) btnHelp = objForm.Items.Item("btnHelp").Specific
-
Hi I am trying to find dependencies for package using dba_dependencies. It gives me all the dependencies (tables and objects) used inside the package. Is there a way to find attribute dependency and procedure name in a package table_name / column_nam
-
Trial version 10.1.3 I think... Preferences, touch up, chagne external editor to Paint.NET. Try to edit image. Paint.net says it cant load the image. So I wrote a quick program to see what parameters were being passed. Insetad of passing a pathname t
-
How can I get the date of the next monday from the currentday?
How can I get the date of the next monday from current day? Please advice. mayooran99