HT4623 Good afternoon, could someone inform about the release of Ios 7 for Portugal???

Anyone knows the hour for the ios 7 release in Portugal???

No. Apple did not give any time for the update only that it would be today September 18th Cupertimo Time Zone.
Considering it still just 7:30 a.m. in California there is still plenty of day left for the update.
Just wait and it will come.

Similar Messages

HT4972 Good afternoon! I addressed in the AT&T company with a question about untying of a sim card of AT&T from my iPhone, all of them made Iphone now is unlocked, I executed all points which were written: To complete the unlock, simply 1 . Open iTunes o

Good afternoon! I addressed in the AT&T company with a question about untying of a sim card of AT&T from my iPhone, all of them made Iphone now is unlocked, I executed all points which were written:
To complete the unlock, simply
1 . Open iTunes on your Mac or PC and verify that you have Internet connectivity.
2 . Ensure a SIM card is inserted into your iPhone.
3 . Connect your iPhone using the dock connector to USB cable that came with your iPhone.
4 . Backup and restore your iPhone using iTunes. For information on backup and restore, please visit http://support.apple.com/kb/HT1414.
5 . After restoring, your iPhone will be unlocked.
Additional information on unlocking can be found at http://support.apple.com/kb/TS3198
I made everything as well as was written, but on completion of the ios 6.1.3 installation the iPhone asks to be activated through wifi or through a wire to the computer.
I connected Iphone to the computer and the text takes off: (Were sorry, we are unable to continue with your activation at this time. Please TR again later, or contact customer care! )
how to me to activate my iPhone?
I hope for your help....

Hey APPLELovestory,
We have an article that goes over troubleshooting iPhone activation issues here:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Perform the following steps:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
Hope that helps,
David

Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************

Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support

I just replaced my macbook's batter and charger about a month ago, but it hasn't been charging for about 2 days now? Could someone help identify the problem and/or provide a solution.

I just replaced my macbook's batter and charger about a month ago, but it hasn't been charging for about 2 days now? Could someone help identify the problem and/or provide a solution.

Try Resetting the System Management Controller (SMC)

Where could i find information about the state of my request to change my ipod nano 1st gen?

my ipod 1st gen is part of the program of replacement, but i dont know where i can find information about the state of my request. some ideas?

You can enter the Serial Number and Repair ID on this page to get a stsus update:
https://selfsolve.apple.com/repairstatus/main.do;jsessionid=0phLTksW2mwLbyQVF3Qs zFtCQMH2Jv5xkMxvMlD6RsKVLhpJjpjj!846893301
Hope that helps!

I contacted Apple support.UK on 22nd December 2011-12-23. I informed about the problem was likely to be with the apparatur.However I tried my father's Ipad2 last night.software is the same my Ipad2's IOS 5.0.1 (9A405), to my surprise it worked properly.

Hi! My name is Nazım . I live in North Cyprus. I’ve got Apple Ipad 2 and Iphone 4. My ıpad2 is iPad 2 Wi-Fi + 3G: Serial number: DQTFFVC1DFJ3., IOS 5.0.1 (9A405), model MC775LL .my itunes is last version. I bought my ipad from America.
I’ve recently bought Philips DC390 from Apple Store in Oxford Street. Althouh Philips dock 1 seemed to work properly (charged and player). The second dock isnot compatible with my ipad2. It didn’t work(play),It charges though.
I sended e-mailed to Philips.uk for assistance. They recomend met o reset my ipad2 to see if this clears any issue, but it does indicate a fault with the unit. It didn’t work either.s(everal time Ireset my Ipad2)
In addition to this, I contacted Apple support.UK on 22nd December 2011-12-23. I informed about the problem was likely to be with the apparatur.However I tried my father’s Ipad2 last night.software is the same my Ipad2’s IOS 5.0.1 (9A405), to my surprise it worked properly. I’ve already reset my ipad2 several times but it didn’work.
I would be grateful if you could make me some recommendations to sort out the refered my problem.

Hi Nazim
This is a user to user group. There is no-one from Apple here.
Use this link to contact Apple directly.

Do you have any more information about the Lightroom Mobile for tablet? [was:Information]

Hey just doing a check. In. Do you have any more information about the Lightroom app for tablet? Like when it is coming out, what features will it have? Because I can't Waite. Especially for editing a raw file on a tablet. Excited.
I do have a Few questions. 1. Will the app have a library mode that allows the photographer to display the raw files on the app like how photo shop touch does. Example. When your import a photo from the iPad it shows up in the photo app that Apple makes. But when you take that photo into photo shop and save it as a psdx file, the project or photo does not show up in the original photo app by apple.
2. Will the app use the smart previews when you import a raw file on to the iPad the same as you do with a computer?
3. Do you have to Waite to go home to edit a raw file or can you edit on the tablet once you import the photo from camera to iPad? Instead of going home import to computer into Lightroom 5, then to adobe cloud, then to iPad.
4. Will the app display catalog, book, etc modes like Lightroom 5 has?

At this stage, we don't know any more about Lightroom Mobile than Adobe revealed in Sep 2013
http://laurashoe.com/2013/09/09/on-the-adobe-horizon-lightroom-mobile/
Adobe will reveal more when they're good and ready.

Make information about the current user available in a managed bean

I've overridden prepareSession in an Application Module (AM) so that when a user logs into my application, it immediately uses the username as a bind variable to execute the query for a View Object (VO) that gets more information about the user, like full name, e-mail address ... This works fine and I'm able to bind the VO to a page and display the information.
But now I'm beginning to realize that I'm going to need this information about the user throughout the application. Do I have to include an iterator for the user info VO and associated attributeValues on every single pageDef, or is it possible to write a single managed bean that will expose the attributes of the single row of the VO as properties. The application I'm working on now is a "minor" upgrade of a JDeveloper 10.1.3 application, so I need a 10.1.3 solution, but I have a 11.1.2 application in the works that will probably do the same thing.
Oh, and sorry if this is an FAQ - I'm probably not using good search terms to find solutions that have already been posted.

Thank you Nick -
Your code didn't give me exactly the answer I needed, but it pointed me in the right direction. For one thing, I had a version of ADFUtils that didn't have the getApplicationModuleForDataControl method. However I was able to do a Google search and find working code for the missing method. And since the values I need to expose in the managed bean are from the VO, not the AM, I had to go one step further and get a reference to the VO from the AM, and then a reference to the first (and only) row of the VO.
For anyone else with this question, here's my version of the code:
public class UserInfo implements Serializable {
    private String eMail;
    private String stateCode;
    private String fullName;
    public UserInfo() {
        AppModuleImpl appModule =
            (AppModuleImpl)ADFUtils.getApplicationModuleForDataControl("AppModuleDataControl");
        ContactInfoViewImpl contactInfoVO =
            (ContactInfoViewImpl)appModule.getContactInfoView1();
        contactInfoVO.reset();
        ContactInfoViewRow contactInfo =
            (ContactInfoViewRow)contactInfoVO.first();
        stateCode = contactInfo.getConStCode();
        System.out.println("At construct UserInfo stateCode=" + stateCode);
        eMail = contactInfo.getConInternetAddr();
        System.out.println("At construct UserInfo eMail=" + eMail);
        fullName =
                contactInfo.getConFname() + " " + (contactInfo.getConMi() != null ?
                                                   contactInfo.getConMi() +
                                                   " " : "") +
                contactInfo.getConLname();
        System.out.println("At construct UserInfo fullName=" + fullName);
    public String getStateCode() {
        return stateCode;
    public String getEMail() {
        return eMail;
    public String getFullName() {
        return fullName;
}

Information about the upcoming version of WLST

Satya,
could you please share some information about the new features of the upcoming version of WLST.
I am asking because currently I am trying very hard to implement Python code to setup our entire WLS 8.1 domains (including custom MBeans with our security providers).
This is maybe useless because with the new version of WLST everything is already available.
Will the new version WLST support the following topics?
- creation / deletion of security realms (including display name)
- creation / deletion of security providers
- addition / removal of security providers to / from a security realm
Against these topics I am currently fighting most :-)
Does anyone have corresponding Python code to share?
Cheers,
Torsten

Torsten, Attached 4 scripts that add atn, atz, audit and remove a provider.
This script creates a new security ATN Provider of type com.bea.atn.MyNewAtnProvider
with object name Security:Name=myrealmMyTestAuthenticator
# The realm name in your weblogic server
realmName = 'Security:Name=myrealm'
realm = ObjectName(realmName)
# The default Identity asserter in your wls
atnIdentProvName = 'Security:Name=myrealmDefaultIdentityAsserter'
atnIdentProv = ObjectName(atnIdentProvName)
# The default authenticator in your wls
atnProvName = 'Security:Name=myrealmDefaultAuthenticator'
atnProv = ObjectName(atnProvName)
# The new provider that you would like to create
newAtnName = 'Security:Name=myrealmMyTestAuthenticator'
newAtnProv = ObjectName(atnTestProvName)
# create the provider
create(newAtnName, 'com.bea.atn.MyNewAtnProvider')
# Now add your newly created authenticator to the default realm
mbs.setAttribute(realm, Attribute('AuthenticationProviders', array([atnProv,atnIdentProv,newAtnProv], ObjectName)))
# set the realm pointer back on the newly created provider
mbs.setAttribute(newAtnProv, Attribute('Realm', realm))
# change the controlFlag's
mbs.setAttribute(atnProv, Attribute('ControlFlag', 'OPTIONAL'))
mbs.setAttribute(newAtnProv, Attribute('ControlFlag', 'REQUIRED'))
This script creates a new Authorizer of type com.bea.atz.MyNewAtzProvider
with object name Security:Name=myrealmMyAtzAuthorizer' and its to the default realm
# this is the default security realm
realmName = 'Security:Name=myrealm'
realm = ObjectName(realmName)
# This is the default authorizer
atzProvName = 'Security:Name=myrealmDefaultAuthorizer'
atzProv = ObjectName(atzProvName)
# New atz provider that you would like to create
myAtzProvName = 'Security:Name=myrealmMyAtzAuthorizer'
atzProv = ObjectName(myAtzProvName)
# create your new authorizer of type com.bea.atz.MyNewAtzProvider
create(myAtzProvName, 'com.bea.atz.MyNewAtzProvider')
# Add the newly created authorizer to the realm
mbs.setAttribute(realm, Attribute('Authorizers', array([atzProv,atzProv], ObjectName)))
# set the authorizer on the realm
mbs.setAttribute(atzProv, Attribute('Realm', realm))
This script creates a default auditor and adds it to the realm
audProvName = 'Security:Name=myrealmDefaultAuditor'
audProv = ObjectName(audProvName)
create(audProvName,'weblogic.security.providers.audit.DefaultAuditor')
mbs.setAttribute(realm, Attribute('Auditors', array([audProv], ObjectName)))
mbs.setAttribute(audProv, Attribute('Realm', realm))
This script removes the deference to the Atn provider that was added and deletes the
atn provider
# The realm name in your weblogic server
realmName = 'Security:Name=myrealm'
realm = ObjectName(realmName)
# The default Identity asserter in your wls
atnIdentProvName = 'Security:Name=myrealmDefaultIdentityAsserter'
atnIdentProv = ObjectName(atnIdentProvName)
# The default authenticator in your wls
atnProvName = 'Security:Name=myrealmDefaultAuthenticator'
atnProv = ObjectName(atnProvName)
delAtnName = 'Security:Name=myrealmMyTestAuthenticator'
delAtnProv = ObjectName(atnTestProvName)
# This will remove the deference of delAtnProv from the realm
mbs.setAttribute(realm, Attribute('AuthenticationProviders', array([atnProv,atnIdentProv], ObjectName)))
delete( delAtnName, 'com.bea.atn.MyNewAtnProvider' )
Thanks,
-satya
Satya,
I will try to put together a script that can dothis
and post it.That would be great.
Thanx.
Torsten

HT1222 This article contains absolutely NO information about the update being offered.

This article contains absolutely NO information about the update being offered. It doesn't even tell me what it might break on my system (i.e. what gets changed). Just excuses of "We Aren't Telling Until Our Investigation Is All Done."
That's not a good enough reason to install an update, it never was, and it never will be.
"Do it because we say so" might fly overseas in Foxconn factories, but around here we don't like being kept in the dark and fed a load of fertilizer.

The individual update pages, such as this one, list the changes and fixes. The reference to information which Apple doesn't release is about security bugs it's identified but not patched, as it would only be useful to attackers.
(64503)

Backup problem message: "no information about the ...

Hi my problem is I want to backup my phone, which I've never done in the past so the first time I try it comes up with the message "no information about the latest backup available..." and it says something about try restoring already made backups if I have any, however I've never done so. So I thought maybe it auto-backups? So I try restore but nothing is found (not surprised since I've NEVER made backups). And the phone is seen through the CA-53 USB cable.
Now I got a generic USB cable which driver for it is possibly different then the one for this newer version of PC Suite because the USB driver CD also included an older version of PC Suite (version 3.0 I believe) however I skipped that and just installed the driver, then went online and got the latest version of PC Suite for my phone. It said it had to change drivers, etc. And so I just let the online PC Suite's USB drivers write over the one that came with my cord. PC Suite connects fine, I think everything works. Music transfers, it is seen and connected. Haven't tried other things but I just want to make a backup. Which comes up with that wierd message. Anybody have any ideas? Cuz All I've found about backups are people who have already made ones and then errors occur. I can't even get to that stage. Now the whole talk about drivers for the USB cord might have nothing to do with it (since everything else works fine) but I just thought I'd mention it.\
Thanks so much and I know I've probably added some useless info but I really want the problem resolved.
Thanks in advanced!
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English (United States)
Language for non-Unicode programs: English (United States)
Locale: English (Canadian)
Input language: English (United States)
Nokia PC Suite:
Version 6.81.13.0
Language: English
My USB Driver Version: 9.0.333.0
Connectivity Cable Drivers (With Nokia PC Suite from online):
Version 6.81.1.2

Sorry for double posting ONCE AGAIN but I just realized I'm on the Europe site instead of the Canada/US site...so sorry! But I think problems could be the same.

Require information about the Role of Data Analyst

Hi All,
I know this might be irrelevent question in this forum, but after a long search, I could not find any suitable place where I can get the information about the role of Data Analyst ( DA ). What all activities the DA needs to perform? Can anyone suggest me anything related to this?
Thanks in advance
Himanshu

As with just about any role, it really depends on the organization. There are dozens if not hundreds of jobs that different organizations might label "Data Analyst." A lot of what a statistician, an economist, or an actuary does would count as data analysis. So would a lot of what a business analyst does. So would a lot of what an software architect does.
Justin

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time.

I have a MacBookPro6,2 and would like to connect an older Dell flatscreen, model L17BNS. I would welcome any information about the type of cable I need and any settings I might need to change, etc. Thank you for your time! I really appreciate the assistance. Kathy

According to:
http://en.community.dell.com/support-forums/desktop/f/3515/p/19351107/19767627.a spx#19767627
It has DVI ports. This means you are best to use an adapter that supports DVI. Note there is no audio that carries over DVI. What you need is a mini-Displayport to DVI adapter, and the proper DVI cable. Since Dell doesn't have the specs, you'll need to tell us if you have pins or holes, and how many are grouped.

On iTunes when i plug my iphone in, the bar at the bottom with contains the information about the capacity of my iphone, it has a bar called 'other' which has 4GB. I don't know what is taking up that space or how to get rid of it. please help :)

On iTunes when i plug my iphone in, the bar at the bottom with contains the information about the capacity of my iphone, it has a bar called 'other' which has 4GB. I don't know what is taking up that space or how to get rid of it. please help

You can reduce the size to normal, which is about 1GB, by restoring the phone.
Backing Up, updating, and restoring your iPhone and iPod touch software
The size of this part can increase when something goes wrong during a sync, or some files can't be read anymore by iTunes.

HT4623 Good afternoon, could someone inform about the release of Ios 7 for Portugal???

Similar Messages

Maybe you are looking for