HT4623 Has anyone had trouble installing 7.1 wirelessly on an ipad mini w/retina?  I downloaded the update, but when I attempt to install, I get an error message saying that I am not connected to the internet when I know that I am!

It downloaded fine, but when I attempt to install it won't verify, saying that I am not connected to the internet when I know that I am!  Tried on several wifi connections while plugged into power source.  Any advice is appreciated!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5.  Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

  • I keep getting an error message saying "There was a problem connecting to the server.  URLs with the type "file:" are not supported."  Can someone help me get rid of it.

    I keep getting an error message saying "There was a problem connecting to the server.  URLs with the type "file:" are not supported"  Can someone help me locate and get rid of this error.

    Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

  • HT4628 my time capsule has stopped working - have a green light but get an error message saying "there was a problem connecting to the server..."

    I noticed this week an exclamation mark on the time machine icon on the menu bar.
    My Macbook, iPad and iPhone all connect to the network but i get "there was a problem connecting to the server..."
    When I open the preferences the time capsule is off but turnign it back on sends me in a loop of selecting the Time Capsule device (which has a nice green light etc) and then getting the error messgae about being unable to connect. I've pulled the plug a couple of times (this has worked in the past) but no change.
    Any advice would be welcome before I try a factory reset or have to return to Apple for repair (the one thing they are offering as the thing is only 5 months old)

    I also noticed that when I go to finder I see two MacBook Air's that are in my name but have the number (2) and (3) next to the name.
    That is a well known bug in Yosemite.
    Try open System Preferences (gear icon on the dock)
    Open Sharing
    Edit back to the correct name for your Mac
    This may...or may not help.  But, it won't hurt.
    The Mac's name may stay stable....or you may see (2), (3), etc again soon.
    Be sure to restart both your Mac and the Time Capsule after you do this.

  • HT4623 Each time I attempt update to iOS 6.1.1, I get a failure message saying I am no longer connected to the Internet. Which is not true

    Each time I attempt update to iOS 6.1.1, I get a failure message saying I am no longer connected to the Internet. Which is not true. How should I proceed?

    Daria-H, I get the same error. Trying on an iPad Mini.
    Neto, I guess we could try plugging it to a computer. However, I am surprised I have to do that. It should work over the air, shouldn't it?

  • When installing HP 3054 wireless printer continue to get a message saying my mac is not connected to the network, but it is....What do i try?

    When installing HP 3054 wireless printer continue to get a message saying my mac is not connected to the network, but it is....What do i try?

    looks like this is your network connection settings problem, you'd better only keep one network adaptor online and linked, if you do not understand how to setup windows routing, this is completely not firefox problem. buddy. wish you goodluck.

  • After itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)

    after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)

    Hi ..
    Follow the instructions here >  iOS: Forgotten passcode or device disabled after entering wrong passcode

  • I have a new Ipad air. I have synced it to my PC before. This time I get an error message saying iTunes could not connect to the iPad because the device time out - what do I do?

    I have a new Ipad air. I have synced it to my PC before. This time I get an error message saying iTunes could not connect to the iPad because the device time out - what do I do?

    Quit iTunes, restart your computer, reset the iPad and try again.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.

    When trying to launch ITunes I get an error message saying that application fail to start because MSVCR80.dll file not found. Reinstalling app may fix problem.

    I've just (finally) managed to fix this problem today. I checked the Apple Support forums, and it seems a lot of people are having the same problem.
    I rang the Apple Support line, and the very helpful man (thanks Alan!) talked me through it stage by stage. If you go to the following page on the internet: http://support.apple.com/kb/TS5376   it takes you through the process. WARNING - it takes a little time!
    Basically, the first thing you have to do is go to your Program Files and double click on your iTunes folder. There'll be a number of files with the suffix .dll - you need to move all the .dll files from that folder to your desktop - you can simply click and drag them on the desktop..
    Next, uninstall iTunes - go to Control Panel / Add/Rempve Programs and when the list comes up remove iTunes. This will take a few minutes... Then reboot your computer.
    Next, go back to Control Panel / Add Remove and Remove - IN THIS ORDER -
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot again!
    Next, check in your Program Files that the iTunes folder is completely gone - if it has, great: if it hasn't, right-click on the folder and press Shift and Delete - it will say "Are you sure you want to completely remove the folder "iTunes"? Click on "Yes".
    Reboot!
    Then go to the iTunes download page and voila! It should download iTunes without any problems... well it did for me.... Good luck!

  • When I double click run installation, then proceed to restart, I restart the computer,  but when it loads back up, I get an error message, saying I need to restart, whats wrong?

    When I double click run installation, then proceed to restart, I restart the computer,  but when it loads back up, I get an error message, saying I need to restart, whats wrong?

    I get an error message, saying I need to restart, whats wrong?
    That is a "kernel panic".
    Try here.  Resolving Kernel Panics

  • I am unable to download from the APP store. I get an error message saying my computer is not verified and click support under quick links..

    I am unable to download from the APP store. I get an error message saying my computer is not verified and click support under quick links..

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Using Abode Reader 11.0.6 in Windows XP, I get an error message saying "Prop Res DLL not loaded"

    When using Abobe Reader 11.0.6 in Windows XP, I get an error message saying "Prop Res DLL not loaded" when I try to print anything.

    Wow, what an ordeal.  First tried running the cleaner, then
    re-installing 11.0.6 -- didn't work (and that was after several attempts
    at reinstalling the Lexmark printer drivers and associated utilities,
    which didn't help either).
    Then tried a system restore to last week, when the print was working OK.
    -- Didn't fix it.
    Then tried cleaning and restoring 11.0.6 -- didn't work.
    Then tried cleaning and restoring to version 10.  Now printing works
    fine and system seems back to normal.
    Apparently, 11.0.6, which was working fine for a while, didn't like some
    other system update, but version 10 is not bothered by that.
    Thanks for your continued help and interest -- without your link to find
    option for installing older versions, I'd still be stuck.
    Jon Fuhrman

  • I want to manage my pdf conversion to word account, but when I click on manage I get an error message saying Heading too Large.  How do I get into manage

    I want to manage my pdf conversion to word account, but when I click on manage I get an error message saying Heading too Large.  How do I get into manage

    Hi,
    May i know which service you are using?
    Would it be possible for you to send me the screenshot of the error?
    Regards,
    Florence

  • I installed the latest version of iTunes but when I go to open I get an error message saying I need to reinstall but it will not let me

    So I downloaded the latest iTunes 10 version. When I go to open iTunes I get an error message C:\Program Files (x86)\Common Files\Apple\Apple Application Support\QuartzCore.dll is either not designed to run on Windows or it contains an error. Try installing the program using the original installation media or contact your system administrator or the software vendor for support. So I tried to download it again and I get a little box saying Repair or Remove and I have tried to do both but then I get an error message saying another installation is in process and to try again later. Anyone have any ideas on how to fix this?? Any help is greatly appreciated.

    If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
    First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
    At the command prompt:
    Type %windir%\system32\msiexec.exe /unregister and hit enter.
    Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
    Type %windir%\system32\msiexec.exe /regserver and hit enter.
    Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
    Restart the PC and try another reinstalll.

  • Im trying to set up a connection to localhost from my mac but keep getting an error message: Firefox can't establish a connection to the server at localhost.

    Hi
    I'm new to working with Mamp, Dreamweaver and WordPress and am trying to work using the Firefox browser. unfortunately i keep getting the error message Firefox can't establish a connection to the server at localhost. when i type the URL http://localhost/explore_ca/blog/wp-admin I cant use Dreamweaver with WP without this is there a reason for this and how do i get around it?

    1- Is your MAMP working '''whithout errors'''(does it show you errors while executing or running and enabling)?
    2- Have you tested other browsers? Is your problem still occuring?
    3- Are you using '''proxy '''or '''VPN '''(or setted a proxy server or VPN server on your Computer)?

  • When I try to download and open Firefox with OS 10.6.3 I get an error message saying "A copy of Firefox is already open" -- and it's not.

    I have a new MacBook Pro running OS 10.6.3. Every time I download Firefox and try to open it, I get an error message saying, "A copy of Firefox is already open." And it's not.
    == This happened ==
    Just once or twice
    == I bought my new computer. ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    Bonjour,
    Je ne peux pas ouvrir Firefox. Voici le message que je reçois : " Firefox est déjà en cours d'exécution mais ne répond pas. Pour ouvrir une nouvelle fenêtre, vous devez d'abord arrêter le processus Firefox existant ou redémarrer votre système." Je ne vois pas de processus existant.
    Si je me sers de copie de documents PDF et qu'il y a des liens dans le document, les liens ne fonctionnent pas.
    Armande

Maybe you are looking for

  • Key mapping in vt100 terminals

    Dear sir, The current application is running in the below Configaration. 1. IBM RS 6000 AIX 4.0 2. Oracle 7.2 3. Sql*forms 3.0 4. unix Sql*form3.0 application is running in this above Configared server.Now the client required to connect this unix ser

  • Should I install Yosemity on an MacMini 2.53Mhz Duo ?

    Hi - should I install Yosemity on an MacMini 2.53Mhz Duo ? Late 2009 model. The mini is currently whizzing away with Mountain Lion.  Other stats 4 gig memory (I know I could vamp up to 8), 500 HD hard drive Am really happy with Mountain (was previous

  • How we can Define a currency key for currency type 40? message no:fc045 all of them saying (oy01) but there we can define that

    Hi, Kindly find below screen shot for above issue.

  • XMII for iDoc verification

    Hi all, I'd like to know your opinion this architectural topic. We are using an xMII 12.0.5 in production to act as a broker between external systems that generate some messages and ECC (through PI). So the message is generated from the sender, flows

  • Problem in OIM installation

    Hi All, I am trying to install OIM 9.1.0.1 on the following configuration: OS: Windows 2003 server jdk: Sun jdk 1.6.0_10 App Server: jboss 4.0.3 database: Oracle 10g I have successfully installed java, and database and run the prepare_xl_db.bat file