HT4623 Having updated my phone with IOS7 I now cannot make or receive telephone calls. Why? Please advise
Can someone please tell me why I can't make or receive telephone calls since updating my iPhone with IOS7? My network provider has been unable to help and think it's an Apple problem...any advice welcome
I'm sorry, but we had made so many changes (the Advisor and I) and it was only after I shared y home screen with him that he had me disable my anti-virus firewall....and everything worked fine afterwards. We went through a number of steps including removing a number of neighbors wifi signals and most important was the changing of the wifi channels.If anyone is using an Anti-virus program, I would suggest that they disable the firewall and then see if their devices connect to the same wifi.
Similar Messages
-
I just updated my iphone to iOS7 and I cannot make or receive calls... any suggestions?
Jessie...
Tap Setttings > Store. Make sure Music is switched on under Automatic Downloads.
To listen to your music tap the Music icon in the Dock on your iPhone -
Since I updated my phone with IOS7, i cant use imessage
Since I updated my phone with IOS7, i cant use imessage
I had same problem on my I pad when it had an upgrade to ios7.
My daughter just switched my I Pad off, & rebooted it
It worked straight away, into I Tunes no problem
I had just spent 10 days trying to sort it out. -
my phone keeps freezing on settings, I cannot make or receive a call but everything else is working including internet and mail. where it should be showing the reception bars it is only showing a broken line. How do I resolve this?
If you are not showing reception bars, then I don't know how the data is working? Have you tried doing a reset? Hold the sleep/wake and home buttons together until you see the Apple logo and then release. After the phone restarts, check to see if it works. If that doesn't help, then try removing the SIM card, then reinserting it. If that doesn't help, then contact your carrier for assistance in calling.
-
I updated my phone to ios7 and it told me to connect to iTunes. When I did the phone said it needed to be restored. I did this and then iTunes said it can't be as it isn't eligible so now my phone won't turn on. Help please!
You can try to restore it via recovery mode as show in the link below:
http://support.apple.com/kb/ht1808 -
After updating my 4s with ios7, my safari links are in a different language. How do I fix it?
Tap the Bookmark/Favorites Icon; select Favorites; tap on "edit" at the bottom right side of the drop down; tap the red circle with white line and tap delete for each favorite you don't want. Then you should be able to add your favorites in English, or whatever language you want. Hope this helps.
-
updated my ipad with ios7 but the keyboard does not work its slow when i hit the letters does not click did not do this until i updated anyone can help me on this to fix it
Settings>General>Reset>Reset All Settings
-
So I updated my phone 3 days ago, backed it up and everything to icloud, I reset my phone and then done the up date I
Then restored everything on my phone but when I did that it didn't restore
All of my photos I only have 25 restored and I had 3,025! How do u get my photos
Back?!?! Help?!?Explain exactly what you mean by: "I reset my phone and then done the up date ."
-
I updated my iPhone 4 a few weeks ago to iOS 7. Ever since I did that I cannot send or receive iMessages. How can I fix this???
Try powering the iPhone off and back on. If that doesn't help, go to Settings -> General -> Reset and reset the Network Settings. Reports are that one of those two steps have cured problems with iMessages for many people.
Regards. -
Hi,
I unlocked my phone about an hour ago using a legitimate unlock code from unlocks.co.uk. I entered the code and it seemed to work fine and now my network shows up as Vodafone uk (I have unlocked it from T-Mobile)
It looks as though it is unlocked and I have checked the connections - I have signal and it says I am connected to the vodafone network, however, I cannot make any calls or send texts! If I try to call a number I get the call failed signed and the failed call dial tone. I tried to send a text but it didn't work - the text now has a red X and says 'unidentified subscriber'. I know this is a fault with my phone as the people I have tried to text and call have no problems with their phones/networks.
Please somebody help me! I have no idea what to do! I contacted the unlocking company and they say if I'm sure the sim I'm inserting is active (which I am) then it is likely my phone has been blacklisted, but I dont think it has. I bought it as a pay as you go handset from Argos just a week ago and it's been working fine until then.
I put my old t-mobile sim back in and it seems to work - does this mean it hasn't been unlocked successfully or not?
Many thanksDo a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot. A reboot in this manner is prescribed for most glitches and operating system errors, and you will lose no data on the device doing this.
Then try your Vodafone SIM again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I updated to 7.1.2 and now I can't receive pictures. Why?
on my iPhone 4s I upgraded my software to 7.1.2 and now I can't receive pictures in my messages. I can send pictures and send/receive texts. I've tried rebooting my phone and resetting my network and nothing is working! Even called my server (straight talk) and after an hour they couldn't even fix it... Help!!
- try to spotlight sear for iTunes Store
- make sure in settings>general>restrictions>installing apps is ON -
i updated to ios7 now i cant download new apps. what should i do?
Try a restore via iTunes. You need to put your device in dfu mode to let iTunes restore. If you don't know to put it in dfu mode, google it.
-
how do i get back in my ipad? After i updated to ios7, its asking for a passcode.
I don't get this. You were asked if you wanted a passcode. Apple always makes you enter it twice to make sure you got the same code. How can you forget 4 numbers you just entered?
The fix is to restore as in this link:
http://support.apple.com/kb/HT1212 -
I accepted the push to update my iphone to iOS6....now it will not ring. It blocks calls from my landline. Help! I've tried resetting, etc.
It has been caused in an OTA glitch. You need to hook it up to your computer, restore and update off of iTunes. Good Luck.
-
Iphone 4 updated to ios 6 last night and cannot make or receive phone calls
How to fix it?!!!! I am sooooo freaking out!!!
If above doesn't work, read
Possible Reason: http://www.beijingiphonerepair.com/fix/diy-repair-iphone-4-people-cant-hear-me-i -cant-hear-other-people/about this known issue.
Maybe you are looking for
-
Can I install a Lacie D2 Drive in my Mac Pro
newbie question, sorry! I have a Lacie D2 500 gig external drive that has crapped out on me. I was told that it could be possible that the enclosure is the problem and not the drive itself. If I take the drive out of its enclosure can I install it in
-
Hello, We would like to create a report where we can see each invoice generated for a day and the total value of all the invoices for that day. Is there any way to do this with Excel Reporter? If anyone knows, please describe step-by-step as we are
-
Movie disappears after screen saver kicks in
If my screen saver (it doesn't matter which one) kicks in while watching a movie, after I press a key to stop the screen saver, Quicktime still plays the movie but there's nothing on the screen, all I see is my background. I can hear the sound, but n
-
Package body does not compile in Object Browser
Hi there, I am trying to compile a package body using the Apex Object Browser. However, when I click the "Compile" button no message is displayed in the box above the package body code. I reduced the amount of code by removing comments and extra carr
-
While upgrading my SharePoint 2007 farm to June 2013 CU , I saw the service 'Windows SharePoint Services Adminisration' was not starting. This is throwing error on every attempt of service start.