HT4623 hello ,  i got some icon on my screen on iPhone  it VPN  whats what ? how to remove that ?

hello ,  i got some icon on my screen on iPhone  it VPN  whats what ? how to remove that ?
Thank you

Secure connections.  VPN... http://en.wikipedia.org/wiki/Virtual_private_network
Some apps use VPN, i.e. Onavo.

Similar Messages

  • I updated my iPod Touch to 6.0.1. after much prompting. Now my music is gone! (along with apps, photos and podcasts). After syncing a bunch of times some of it came back, but not all of it. How odd is that? How can I get my music back on it??

    I updated my iPod Touch to 6.0.1. -- after much prompting from iTunes. Now my music is GONE (along with apps, photos and podcasts). After syncing a bunch of times some of it came back, but not all of it. How odd is that? How can I get my music back?? I'm really bummed! Everything shows in iTunes, but it's not synching right. So glad I updated. NOT.

    Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
    When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
    Therefore, remembe the passcode that you enter this time.
    It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup.

  • TS1424 I got a transaction from my credit which I didn't approve ,so how can refund that amount .

    I got a transaction from my credit which I didn't approve ,so how can refund that amount .
    The game is FCBarelona starscup, the transaction error for 100 shields which is equal to 19.99$.

    Just contact iTunes store support and request the refund:
    http://www.apple.com/support/itunes/contact/

  • TS1373 my  5th generation ipod acts like it is going to sync and then "ejects" itself before even 1 song can be synced. It then doesnt recognize that it has been ejected and keeps the"do not disconnect" icon on the screen even after unplugging. What do I

    my  5th generation ipod acts like it is going to sync and then "ejects" itself before even 1 song can be synced. It then doesnt recognize that it has been ejected and keeps the"do not disconnect" icon on the screen even after unplugging. What do I do?  it also makes a lot of noise while connected to the computer.

    Is the camera damaged? Could be a hardware problem.
    Try:
    Close the Camera app in the multitasking bar, then try again.
    Restart/Reset/Restore your iPod. In that order.

  • My camera icon has disappeared from my iphone 3gs.  What do I do?

    My camera icon has disappeared from my iphone 3gs.  How do I get it back?

    Any restrictions set up in Settings/General/Restrictions? If yes, disable them, restricted apps can't be found on any of the screens.

  • Some pdf files won't open in browser while others do - how to fix that?

    Hello,
    just switched from Opera to Firefox and - with the help of some add-ons - feel pretty satisfied already.
    One annoying problem though: While many pdf-files will open properly with PDF-XChange Viewer plugin within the browser, there are many websites with links to pdf files where the setting "Use PDF-XChange Viewer (within Firefox)" prompts Firefox to download the file instead.
    Examples:
    http://www.visitbritainshop.com/nordics/travel-transport/london-transport.html
    The map of London Transport (link in the middle of the site) will open within the browser
    http://search.knightfrank.co.uk/ngh140118
    The floorplan or the brochure won't open within the browser but be downloaded instead
    I've never experienced this (in Opera) before.
    What could be the reason for that? And is there a way to change it?
    Thanks in advance!

    While trying to find a solution for that issue, I stumbled across a post that describes a similar problem with jpegs:
    https://support.mozilla.org/en-US/questions/979919
    One reply suggests: "Are you sure that these images are send with a proper MIME type for images and not with a generic MIME type that makes Firefox show the "Open with" dialog? "
    The suggested solution, an extension called Open-in-Browser https://addons.mozilla.org/firefox/addon/open-in-browser/
    works fine regarding the pdfs in question, and is acceptable for me, although I agree with the poster from above, that " it is a bug that should be fixed instead of relying on an extension".

  • I got my husbands library from his old iphone to my computer, but how do i get my library to his iphone

    i got my husbands library to my library on my computer ,, but how do i get my library to his old iphone

    This is the method I would normally recommend:
    Backup with this User Tip, restore the library to the new computer using the same tool, keep the backup up-to-date in future. Deauthorize the old computer if you no longer need to access protected content on it.
    You can use your iPod classic to move your library to a new computer but if you don't already have a backup copy of the library (and your other important data) now is the time to think about it.
    tt2

  • TS1424 SOME SONGS FROM AN ALBUM DID NOT DOWNLOAD. WHAT'S UP WITH THAT??

    SOME SONGS FROM PURCHASE OF AN ALBUM DID NOT DOWNLOAD. TITLE OF SONGS ARE THERE WITH A ? MARK NEXT TO THEM . BUT NO SONG. WHAT HAPPENED??

    Provided you are in a country where you are able to redownload past purchases, delete the songs from your iTunes Library.
    Redownload them by clicking "Purchased", under Quick Links at the top right of the iTunes store.
    If this doesn't work contact iTunes support here:
    http://www.apple.com/support/itunes/contact/

  • How do you remove camera icon on lock screen on iPhone 5 running iOS 7

    How do you remove camera icon on iPhone 5 running iOS 7

    I was on a long call. I locked the phone and slipped it in my pocket. Apparently the lock screen camera had activated though it had not taken any shots . The result was post my 40 odd minute call when I pulled the phone out to disconnect I discovered the camera was active and phone was hot and battery had reduced for 92% to around 50%. This seems a serious flaw in design...

  • I want to buy something in some apps,but it shows "Your purchase could not be completed" how to solve that?

    I used to change region to download an application and want to buy their products in the game.but it showed "Your purchase could not be completed" how to solve that?

    If you are also getting a message to contact iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I have a photography plan but not sure it includes Lightroom. I tried to download it yesterday got the icon but it would not open up.  I do have Lightroom 5.7 prior to my Photo Plan

    I tried to download Lightroom CC yesterday and got the icon but when I tried to open it up nothing happened.  Does that mean that I do not have Lightroom covered in my Photo Plan?

    If your iPad is running iOS 5 or higher, iCloud would be listed in Settings.  If you are signed into an iCloud account your iCloud ID would be listed in Settings>iCloud.

  • I just got the new iOS5 update for the iPhone 3GS and I cannot receive messages because it says that the SMS is full. I deleted all my texts, but still cannot receive texts. Is there something I can do???, I cannot receive texts with the new iOS5 update

    Hi everyone, I just got the new iOS5 update for my iPhone 3GS. I receive a message saying that "Your SMS mailbox is full. New messages cannot be recieved until you delete some messages." I deleted all of my messages but still could not receive texts after restoring and restarting my phone. Can anything be done to remedy this??? Thanks!

    Apple is screwing the pooch on this one.  Need to call in and be vocal. 

  • Hello my MBP 15" stops at grey screen after apple logo disappears

    hello, my MBP 15" stops at grey screen after apple logo disappears, what can i do about this? ive tried booting into safe mode but screen turns blue with black lines also tried resetting NVRAM and PVRAM but still stops at grey screen, also tried using applejack, it shows no problems at all, says my disk volume is ok but the screen still stops at grey during start up, havent tried the installation disk thing because i dont have my installation disk with me

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
         a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 10
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 11
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 12
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • My 820 rear camera got dust in it... how to remove...

    hellooo,
    i got my lumia 820 just a month back, and i realized that rear camera got somr dust particles in lens.
    please suggest me how to remove that.....
    thank you.
    THE_SUN

    No way to remove it on your own. You have to bring it to the Nokia Care Point. They'll be the one to clean the dust for you. If your phone is still in warranty, it will be free of charges.
    Smile lang lagi.

  • How to remove some thread from my threads

    Hi,
    recently I have send the request to approve my user account in TechNet. They are approve my account and my problem was solved. now the same thread so many users are give their command so each time new command arrived it will shown my unread threads. actually
    I don't want got the unread notification for that particular thread how can remove that from my profile.
    Thanks 
    Ravin Singh D

    Hi,
    There is not currently a way to remove a thread from your thread list, even if you delete your post from the thread.
    The verification threads do eventually get closed out, so it'll only be a matter of time before that thread no longer receives updates.
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)
    This just goes to re-emphasize the foolishness of using the reportabug forum (or any forum) to implement the account verification.
    I personally don't use Alerts, so for me the worst part is the fact that these threads completely dominate the reportabug forum, rivaled only by off-topic threads that never seem to be moved promptly.
    David Wilkinson | Visual C++ MVP

Maybe you are looking for

  • Rebate Agreement reversal

    We have created a rebate agreement and settlement has been made. Subsequently we have created another agreement and run vbof. We have stopped last month and this month we had run the vbof again. Its because of this invoice 2 invoices on 10th april po

  • Does anybody know whether PeopleSoft HCM 9.1 release Chinese version?

    wait...

  • How can I reset my song line numerically?  they imported out of sync.

    Hi,  Recently had to reload my music back into iTunes for my iPod Nano 6th generation.  I find that many of the song lists are now out of numerical sequence.  How can this be corrected? How can I reorder my songs?  Thx.  rm

  • Dynamic report titles

    I notice that when you create a report, you can only enter a static title but I want the title to be dynamic (based on SQL). What's the best way to do this AND have it displayed over the report table ? Create a "Display Only" item? Create a one line

  • Lib/libz.so: could not read symbols: Invalid operation

    Hi, I am facing the following issue while compiling my code which is using gdcm lib in QT. The same source works fine in ubuntu but not here.... lQt5PrintSupport -lQt5OpenGL -lQt5Widgets -lQt5Gui -lQt5Core -lGL -lpthread /usr/bin/ld: /usr/local/lib/l