HT4623 Help with updating Ipad

I attempted to update my Ipad and it is asking for a Pass Code - not a pass word.
It also displays "Ipad is Disabled"   Now what  Help?

You are in Recovery Mode. Follow the instructions below to recover your iPad.
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

Similar Messages

  • HT4623 HELP with Updating iPod 4.2.1 to iOS5

    Help!!!  My nephew has an iPod, 4.2.1 version, which I am trying to update to iOS 5 so he can download games.  The directions on the Apple website say to go to "Settings," then "General" and then "Software Update".  But there is no "Software Update"  listed under "General" on his iPod. I have been searching the Apple website & trying different things with no luck!  Can someone help me?

    His iPod generation cannot be upgraded past 4.2.1. See:
    See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
    IPhone, iPod Touch, and iPad iOS Compatibility Chart
         Device                                       iOS Verson
    iPhone 1                                      iOS 3.1.3
    iPhone 3G                                   iOS 4.2.1
    iPhone 3GS                                 iOS 6.1.x
    iPhone 4                                      iOS 6.1.x
    iPhone 4S                                    iOS 6.1.x
    iPhone 5                                      iOS 6.1.x
    iPod Touch 1                               iOS 3.1.3
    iPod Touch 2                               iOS 4.2.1
    iPod Touch 3                               iOS 5.1.1
    iPod Touch 4                               iOS 6.1.x
    iPod Touch 5                               iOS 6.1.x
    iPad 1                                          iOS 5.1.1
    iPad 2                                          iOS 6.1.x
    iPad 3                                          iOS 6.1.x
    iPad 4                                          iOS 6.1.x
    iPad Mini                                     iOS 6.1.x
    =====================================
    Select the method most appropriate for your situation.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • Help with updating iPad to new AppleID.

    I updated my Apple ID to a new email address, and am trying to update this on my iPad. When I go to iCloud in settings, my email address is grayed out, and appears that I can only change this after entering my password. The problem is when I enter my password, my Old E-mail/Password combo is not recognized. Can anyone help?

    Hello jennbronniche,
    You may need to temporarily revert the change to your Apple ID, sign out on your iPad, then change your Apple ID back once more.
    Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    Scroll down and tap Delete Account, then tap Delete to confirm.
    Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
    Enter the password for your previous Apple ID.
    Return to Settings > iCloud and sign in with your new Apple ID.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/TS5223
    Cheers,
    Allen

  • Help with updating ipad mini?  :(

    Hi I have an ipad mini and when I click on software update it says ios 6.1,3 up to date? Any ideas. Have tried turning it off and restarting it :(

    Keep trying or maybe try again later.  There are millions of people who are currently trying to do the same thing you're doing.  Just be patient and you will be able to update

  • HT4623 help with update

    how do you close open apps

    You forward a message by pressing the original message until copy or more pops up . Hit more then it will select that message . Then tap arrow in lower right corner an the forwarding prompt will appear .

  • MAC OS 10.6.8 Using Safari 5.1 Needing Help With Updating Adobe Flash

    Hello-
    Recently Adobe Flash installed an icon in my System Preferences and when I click the icon there are several tabs.  One allows updates to check automatically.  It says it will install the latest version of Flash without having to remove the previous version, but I have never been told that a newer version is available unless I clcik "check now."  although "Check for updates automatically" is checked, I do not know where it tells me a newer version is available.  Also, there has been 5 "newer versions" available since this icon was installed in System Prefeences, I have only found out about the newer versions when I clicked "Check Now."  If I read that with this new way to install the latest Mac version of Flash does not require me to uninstall the previous version of Flash how do I install the most recent version of Flash?  Does it come in an email?
    Since it is not telling me that there is a more recent version of Flash unless I click "Check Now" should I still do it the way I used to install the latest version of flash?  (The way before this icon was added to System Preferences)?
    I would appreciate help with updating Flash to the most recent version.  I used to uninstall the older version, restart the browser and download the most recent version and install it.  It always worked find but this was before there was an Adobe icon in my system Preferences.

    Hello,
    The way you used to do this (uninstall, restart the browser, etc.) is still definitely valid and probably the "safest" way to get a new version installed.  Uninstalling shouldn't be required, but it definitely doesn't hurt.  If you feel comfortable doing it the old way, please feel free to continue using that process.
    As for notifications, this is a bit trickier, but in general you should be notified within 30 days (or so) after a new player is released.  This usually occurs when the browser loads swf content.  Clicking the button will, like you mention, immediately check.  Another alternative to finding out when a new player is released is to subscribe to our Flash Player Releases feed.
    Is there a way to be automatically notified when a new Flash Runtime release is made?
    Thanks,
    Chris

  • I need help with the iPad Remote app to connect to apple TV 2

    I need help with the iPad Remote app to connect to apple TV 2 I have the app already on my ipad and when I open it only shows my itunes library and not the small black Apple TV 2 icon! How do i fix this and i know it's something 

    Get the manual at http://manuals.info.apple.com/en_US/AppleTV_SetupGuide.pdf
     Cheers, Tom

  • I need help with my iPad I live in Canada, but I think my computer thinks I'm in US please help!

    I need help with my iPad I live in Canada, but I think my computer thinks I'm in US please help!

    So what is your iPad doing, specifically?  Are you having a problem when you try to sync it or back it up on iTunes?  I think we need more information here before we can help...
    Thanks,
    L.

  • Help with updates for CS6

    I need help installing latest updates for CS6.  I have Win 7 and have tried updating from the Help - Updates menu.  The error is:  U43M1D207.

    Thanks for your response.  I am in the United States in So. Arizona.
    Date: Fri, 5 Oct 2012 12:21:45 -0600
    From: [email protected]
    To: [email protected]
    Subject: Help with updates for CS6
    Re: Help with updates for CS6 created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    Crunkle1 you are welcome to work directly with our support team for guided assistance.  If you go to http://www.adobe.com/ and select Help and Contact Us you should be given the option to contact our support team via telephone.  Which country/region are you in?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4752605#4752605
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4752605#4752605
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4752605#4752605. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • HT201541 I need help with updating my browser.

    I need help with updating my browser.  Its telling me that Safari is outdated.

    That is a very old version belonging to Snow Leopard. I take it you are not actually running Yosemite.
    Upgrading to Yosemite
    You can upgrade to Yosemite from Lion or directly from Snow Leopard. Yosemite can be downloaded from the Mac App Store for FREE.
    Upgrading to Yosemite
    To upgrade to Yosemite you must have Snow Leopard 10.6.8 or Lion installed. Download Yosemite from the App Store. Sign in using your Apple ID. Yosemite is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks/Yosemite- System Requirements
          Macs that can be upgraded to OS X Yosemite
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • Help with updates - The software change returned error code 0x87D00215(-2016411115).

    I have rolled out bunch of updates across few hundred workstation systems.
    Few of the desktops have failed to install SOME of the updates and just can't get my head around as to why?
    Looking at one of the workstations, I can see 5 updates are pending download at 0%.
    Some of these fail after a while and with in Software Centre, I can see 'Help with updates - The software change returned error code 0x87D00215(-2016411115).'. Not exactly sure what this means, but I have tried clearing the cache and
    rebooting the workstations few times.
    (I have also tried to use Windows Update and install one of these manually, which worked.)

    Investigating this further, I have found the following in CAS.log:
    ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Successfully created download request {ED6E9E5C-E806-43CA-9F93-49AC72D1DEAD} for content 53bf87a2-bedf-4def-b0ec-9637613c3429.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Requesting locations synchronously for content 99ddb078-b780-4605-8fac-9607fe56450d.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/99ddb078-b780-4605-8fac-9607fe56450d', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Requesting content 99ddb078-b780-4605-8fac-9607fe56450d.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Successfully created download request {67B7E59B-A386-4EA8-BF39-2EB64B108A6C} for content 99ddb078-b780-4605-8fac-9607fe56450d.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Requesting locations synchronously for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    The number of discovered DPs(including Branch DP and Multicast) is 1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Calling back with the following distribution points ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Distribution Point='http://DPSERVER.com/SMS_DP_SMSPKG$/61d33de7-9582-41e3-82fc-3e0f970b60f3', Locality='LOCAL' ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Requesting content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1, size(KB) 0, under context System with priority Foreground ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    ICcmContentTransferManager::ModifyJobPriority failed with error 0x87d00215 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    No need to change timeout settings ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)
    Successfully created download request {12E48136-B545-4C42-9745-9FF97CE38D52} for content 61d33de7-9582-41e3-82fc-3e0f970b60f3.1 ContentAccess 01/06/2013 17:19:24 3316 (0x0CF4)

  • HT4623 need to update Ipad 1 and don't know what to do?  Articles are not helping.

    need to update Ipad 1 and don't know what to do?  articles are not helping.

    If your are using IOS 3/4, you need to connect to iTune (computer) to update software
    http://support.apple.com/kb/HT4972

  • HT4623 how to update ipad to ios 5

    how do i update ipad 2 to ios 5

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • HT4623 How to update iPad iOS 5.1.1

    How to update iPad iOS 5.1.1??

    If you need serious updating you might be in the market for a new ipad. If you do that, you can sell your ipad, though you won't get much $ for it these days. However, if you have a very Senior citizen in your life you might set it up for them with family pictures, music they loved years ago, some books, and get them online. These also help memory. Someone out there might find it a priceless gift.
    Also, the Apple online only Certified refurbished Store has deals on refurbished ipads. Each comes with a brand new front and back cover, a brand new battery, a full one year warranty including 90 days of free phone support, and it comes in a white box like a new ipad with the cables. We have two and they have been great. Shipping is free. I suggest if you buy refurb, you only buy it on the Apple website. 
    These sites listed below might help you get some older versions of apps.
    Hope this helps.
    http://9to5mac.com/2013/09/17/ios-app-store-now-allows-legacy-app-downloads-to-s upport-older-hardware-and-software/
    http://www.engadget.com/2013/09/17/apple-ios-last-compatible-version-app-iphone- ipod-ipad/
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/finding-a pps-for-older-devices

  • I need help with my ipad 2

    Hi im hoping someone can help me i switched on my ipad 2 to be show the following message
    ' iPAD DISABLED connect to itunes' one problem when i do connect it then says that there is a password on the pad and i need to enter it,however i cant because as the error says its disabled .Can anyone help ????

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

Maybe you are looking for

  • Please Help -- Dynamic Text Wont Load :-(

    Hi Gang, I've just written a quick mail form in Flash8Pro/PHP - the user enters their contact details & a message, and it sends it off to the specified email address. The feature works fine for the most part, but there's one little problem. The dynam

  • Upgrading hardware in MacBook Pro 13" (Mid 2012)

    Hello, I'd like to upgrade my MacBook Pro 13" (Mid 2012). I've decided to replace my HDD with SSD, obviously, and add some RAM memory. I would appreciate if you let me know what do you think about the following hardware: Crucial 2x4GB DDR3 1600MHz CL

  • US and UK Printer Cartridges

    Hi there Folks, I was bought n HP 2050 printer as a present and they provided an HP 61 XL black ink cartridge. When I install the cartridge it does not get recognised by the printer!! How can I get teh ink to work?

  • OEM Grid "Failed to connect to database instance: ORA-03135

    Hello all, Did anyone know why we get the error in the OEM grid: Failed to connect to database instance: ORA-03135: connection lost contact (DBD ERROR: OCISessionBegin). We checked the listener and it is running fine. Can someone advice where to look

  • Background for 7941 with CCM 5.0.4

    I have the Linux version of callamanger and am trying to get a custom image uploaded to the phone without any luck. I will attach my list.xml and my images. What is the subdirectory for Linux for images?