HT4623 hi i am connected to Wi-Fi but i still cannot get my Apps to update?
i had connected to Wi-Fi and disabbled my 3G to update the Apps but i am still not succeding. please advice on the best way to update these Apps using Wi-FI
You have signed on the App Store with the AppleID that was used to obtain said apps?
Similar Messages
-
HT4126 I CONNECTED MY MACBOOK TO THE TV USING AN ADAPTOR, BUT I STILL CANNOT GET ANY SIGNAL
I CONNECTED MY MACBOOK TO THE TV USING AN ADAPTOR, BUT I STILL DO NOT GET A SIGNAL, WHAT SHOULD I DO?
I just corrected my problem. After connecting to the TV, go to System Preferences, Sound, and select the HDMI rather than Internal Speakers.
-
i broke my ipods charger a few months back. and since then i haveforgotten my ipods 4 didgit code and it became dissabled. i have connected to itunes and tried everything to get back into it. can anyone help me? totally appritiated.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I just upgraded to ios 6 and cannot open app store on my phone any suggestions?
Search the forums, there are multiple similar postings about that issue.
-
my ipod touch is connected to wi-fi but not access safari, youtube, itunes, app store, safari even tells me that is not connected to internet, also had trouble at first because I could not connect to wi-fi, afternoon much as told me that the password was incorrect when it was correct, please tell me as I do to let me access youtube, safari, app store, i tunes...
thanks- Reset the iPOd. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
what happened is that my internet connection was not good so i downloaded .ipsw file from a torrent but now i cannot get it to update my ipad because ios 5.0.1 is out i tried copying files to ipad updates in the itunes folder but it still asked me to download a 700mb software update
plz helpIf you downloaded the correct version for your iPad model (and the different models have different ipsw files), then you should be able to navigate to it in iTunes by pressing and holding the shift key on Windows (command key on Mac) when clicking the Check For Updates button.
Message was edited by: King_Penguin -
my computer failed to install the compatible driver software when updating my iphone and now my iphone is unusable as it is requesting me to connect it to itunes but i physically cannot connect to itunes... help me please?
Hi there croadstar,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W. -
I have followed all relevant steps, my iPhone5 and apple TV are connected to the same wireless network, but I still cannot use airplay. When I choose the airplay option on my phone, the only option I get is "iPhone"
Welcome to the Apple Community Willy.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device. -
When I try to update two certain apps in the App Store, I get a message that says 'cannot connect to iTunes store'. Any idea how to get these apps to update?
Check that the apps are still available in the store
-
I have apps on my iPad and my computer is not connected to the Internet. How do I get my apps to load on the computer ? Because it says the apps on my iPad will be replaced with the apps that are on the computer but there is none there!
Authorize the computer in iTunes -- Store>Authorizie this computer. Transfer the purchases from the iPad into iTunes and then you can sync with iTunes. Read this for instructions on transferring purchases from the iPad into iTunes.
Transfer purchases.
http://support.apple.com/kb/HT1848 -
My iPad is connected to my computer, but it still will not download newly purchased apps. It is prompted me to connect to itunes or use a wifi setting (which I do nto currently have). What can I do?
My iPad is connected to my computer, but it still will not download newly purchased apps.
Launch iTunes with the iPad connected to your computer.
Select the iPad under Devices in the source list left side of the iTunes window.
Select the Summary tab from the menu.
Deselect: Sync with this iPad over Wi-Fi
Quit then relaunch iTunes.
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Hi, I am new to iPhone and downloaded a app from the app store and had my iPhone connected to my computer but I just cant find the app on my phone I'v checked on the desktop and the app store but it is nowhere...can somebody point me in the right direction plzzzzz
If your iPhone is not recognized by iTunes when connected - not available under Devices in the iTunes source list, check this link.
http://support.apple.com/kb/TS1538?viewlocale=en_US&locale=en_US
For voice memos, I have include voice memos when syncing selected under the Music tab for my iPhone sync preferences with iTunes which transfers voice memos from my iPhone to my iTunes library when syncing. -
Ok i got my iPod from my brothers friend and my IPod says "iPod is disabled connect to iTunes" then my computer says cannot get onto iPod because I need the iPod passcode and of course I cannot put it in so I need some help please
Try placing in DFU mode and then restoreing.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
The ATT man says I am connected to the internet but I still have a flashing amber light
The ATT uverse man says I am connected to the internet but I still have a flashing amber light. Any suggestions?
Does this mean that the Time Capsule is connected to the Internet but it has a flashing amber light?.....or.....does this mean that the Time Capsule is not connected to the Internet and it has a flashing amber light?
If you are using a Mac, we need to know what operating system you are using in order to provide troubleshooting advice.
If you are not sure what operating system you are using, click the Apple icon in the upper left corner of the screen, then click About This Mac.
Please post back with the OS X Version number that you see there. -
Cannot get to apps on iphone it's giving me the connect to itnes and it does not do anything
cannot get to apps on iphone...it just keeps telling me to connect to itunes...and it won't let mew do anything
Try Recovery Mode.
Read this: http://support.apple.com/kb/ht1808
Maybe you are looking for
-
Add effects to video does not work
I have a motorola ROKR E6 I am able to use it as a webcam in ichat on my mac mini. But when I try to add effects to it iChat says connection problem. I tried this on photo booth as soon as I launch Photo Booth while ROKR is connected Photo Booth cras
-
Cffunction, onSessionEnd throwing an error, please help
Hello; I am using an application.cfc file to run my web site. I added an argument for onmissingtemplate and when I did that, it made my onSessionEnd statement throw an error: this is my statement: <cffunction name="onSessionEnd" returnType="void"> <c
-
My MacBookPro has been working great... but now it sometimes freezes to a blue screen. it does not happen at login... but while i am running different programs. it will remain on the blue screen anywhere from a second to a minute, and then return to
-
FaultPolicy is not working for mediatorFault.
Hi , I am facing issue in invoking faultPolicy for MediatorFault. Below are fault-bindings.xml and fault-policies.xml fault-bindings.xml <?xml version="1.0" encoding="UTF-8"?> <faultPolicyBindings version="2.0.1" xmlns="http://schemas.oracle.com/bpel
-
I was going to install leopard - failed - now computer cannot find hard drive - I tried to reinstall tiger cannot find hard drive so put disk warrior - finds hard drive says is it an extended adjusts everything - finds hard drive and says it is okay