HT4623 how to get started connected with laptop with net connection but announcement is to try using wifi ,try again over mobile please help me

Sim card inserted in a new iphone 4s but iphone is not activated and announcing try using wi fi or try again over mobile please help?

You can only sync to one computer/iTunes library. To make this your syncing computer:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Similar Messages

HT204266 I lost the app "app store" on my iphone. How to get it back? I couldn't find a way neither on the iphone mor on iTunes Could you please help me in restore this app? Thanks

I lost the app "app store" on my iphone. How to get it back? I couldn't find a way neither on the iphone mor on iTunes Could you please help me in restore this app? Thanks

The App store is a iOS function and cannot be deleted. Try checking other home screens/folders and see if you can locate it. If not, go into Settings>General>Reset>Reset Home Screen Layout.

I was receiving and sending my emails perfectly, now nothing gets downloaded? It checks for new emails but do not find anything and I know there is. Please help

I was receiving and sending my emails perfectly, now nothing gets downloaded? It checks for new emails but do not find anything and I know there is. Please help

Oh, the irony of referring to yourself as "myklthebrain". Make an appointment, at the nearest Apple store, with an Apple Genius, and hope that (s)he can sort it out.

HT5312 I really need help. I forgot my security question answers and i dont remember them. I dont know how to get to this email thing and i dont remember if i ever set one up or not.. Please help quickly

I forgot my security questions and i dont know how to get to the email rescue and don't think i ever set one up with my account.. Please help me !!!!

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

Tried to upgrading ipad 1 from itunes and l guess it did not complete because all I have showing on the ipad is the itunes logo with the usb cable. when l try to connect it to my system, it resquest that a driver be used to install the device. Pls help

Tried to upgrading ipad 1 from itunes and l guess it did not complete the process because all I have showing on the ipad is the itunes logo with the usb cable. When l try to connect it to my system, it resquest that a driver be used to install the device. Please help! How do I restore?

Restoration is relatively simplistic. Here's whatcha do. Plug your ipad in, open itunes, now if itunes doesn't recognize it then you may have a problem, anywho, click on the ipad in the devices interface and go to the info tab, click restore, and it'll be just like it was when it left the factory. To get you data back, it should ask if you would like to use a backup, just select the backup you want and you'll be good to go. That is if you regularly backed up your iPad.

How to get start to develop Oracle database applications with NetBeans?

Dear Ladies and gentlemen,
I am new to NetBeans. And I know nothing about Oracle. I have installed the
NetBeans 6.8, and I want to learn Oracle database application development
with NetBeans. I don't know how to get start. Give me some suggestions,
please. Thank you very much.
Best Regards
Ma Xiaoguang

Download Oracle Express Edition for educational purposes and start from there.
Download at:
http://www.oracle.com/technetwork/database/express-edition/downloads/index.html
Documentation at:
http://www.oracle.com/pls/xe102/homepage

Update to kichat: FAQ 2 - How to get my router to work with iChat?

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

How to get sound when my laptop is hooked to my tv w/hdmi cable?

how to get sound when my laptop is hooked to my tv w/hdmi cable? it's a hd tv and my mac's os 10.6.8
tried using an external speaker both w/the computer and then the tv, but neither worked......
Message was edited by: bevmex

Hi,
Open windows Control Panel, open Device Manager and open up Display Devices - make a note of the hardware listed here i.e. ATI, NVidia or Intel.
Next, connect your notebook via HDMI to your Tv. Right click the speaker icon in the Taskbar and select Playback Devices. Left click once ( just to highlight the entry ) the HDMI Output that has the same name as your display adapter and then click the Set Default button - see if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Adobe Illustrator Help: tips for how to get started?

I am new to adobe products. Does anyone have any tips for someone new who is just starting out
with adobe illustrator? I have not used it before. Any beginner tips on how to get started with adobe
illustrator would be appreciated. Thanks

start by reading the documentation and follow the samples shown, get familiar with the user interface, get to know where the tools are and what they do...and the most important thing practice, practice, practice.
other than that, there are plenty of resources online, depending on your learning style, buy a book, follow tutorials, watch videos, take a class.

Anyone know how to get to the security screen with a " Crashed" phone?

Getting the message "Restore Needed" but it says I can't connect with my Iphone because my phone has a security code. I can't get to the Security code screen on the phone. Anyone know how to get to the security screen with a " Crashed" phone?

Restore the phone on the same computer it was last synced to and it will not require the unlock code.
If you don't have access to that computer you will have to use Recovery mode, which will wipe all content. See: http://support.apple.com/kb/HT1808

How to get my Addon to work with the license key?

Hi,
Can someone tell me how to get the Addon to work with the license key?
I've follow the steps as stated in this thread:
[Re: SBO 2005 A - How do I get a Connection string from SAP B1.|Re: SBO 2005 A - How do I get a Connection string from SAP B1.]
1) i've registered a BASIS key and get a 'BASISXXXXXX" string
2) then i paste my BASIS key in "Solution" of Add-On Indentifier Generator and generate the Add-On Indentifier Code
3) then i paste the string to my source code
which is the "XXX" of the sample code in that thread.
static string AddonIdentifierString="XXX";
int lRetCode=0;
int errCode=0;
string errMsg= string.Empty;
string connectionStr ="";
link = new SAPbouiCOM.SboGuiApiClass();
connectionStr =Environment.GetCommandLineArgs().GetValue(1).ToString();
link.AddonIdentifier=AddonIdentifierString;
link.Connect(connectionStr);
oApp = link.GetApplication(-1);
vCompany = new SAPbobsCOM.CompanyClass();
string cookie = vCompany.GetContextCookie();
string conStr = oApp.Company.GetConnectionContext(cookie);
vCompany.SetSboLoginContext(conStr);
lRetCode = vCompany.Connect();
4) then i add my add-on using manager role at Add-on admin
5) then i can see my add-on there. it not suppose to be there since i've not installed any of my add-on license for my own add-on.
what steps did i miss? Can someone please advise? Thanks
ps : i'm coding in VB

Hi,
i think you have to change the license file attributing the number of licensing for your addon, then download it from https://websmp202.sap-ag.de/smb and then install it on SAP License manager, then I think you should give the license for your addon for individual users (example manager)
I hope it helps.
Best regards

Creating Extensions - How to get started?

I've been snooping around for some tutorials or information on how I can get started on building extensions for Dreamweaver CS3 but I'm not turning up much. Does anyone have any sources for this sort of thing?
Also, generally speaking, can you build the GUI for the extension in Flash/Flex and have the GUI communicate with, say, the desktop through the Dreamweaver API?

Jason,
I mention a few resources in this blog post:
http://blogs.adobe.com/dreamweaver/2009/02/extending_dreamweaver_getting.html
The SDK mentioned in the comments can be found here:
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1009962
You'll get a few errors about menu items that can't be put in the specified location, but they are added in the Commands menu, so all functionality is there. That error has been fixed, but that extension has not yet been updated on the Exchange.
Starting in CS4, you can use Flash for UI, but I don't think you can access anything outside of DW. There's documentation here:
http://help.adobe.com/en_US/Dreamweaver/10.0_API_Ref/WS4FB61645-9C4E-4667-B6D4-0E5F553BEF4 F.html
HTH,
Randy Edmunds

Cloud and Pro features of Behance, how to get started?

Hi,
I want to find out more about http://www.adobe.com/products/creativecloud/behance-community.html
How do I actually set this up, I can't find how to get started. I currently have a Muse website on BC.
~ Anita

Anita1390,
You will get Behance integration with the new CC which is not yet launched. This article will give you an idea about the steps you need to follow to get stated with Behance.
http://helpx.adobe.com/creative-cloud/kb/publish-behance.html

How to get started on Developer Server

Hi
Could you show me how to get started with developer server 6? How can I deploy an existing form to the web? Where can I read more information on this topic? Thank you.

hi,
It is avialble in the below URL:
http://technet.oracle.com/docs/products/developer/doc_index.htm
read it and try it
null

How to get whatsapp on BBCurve 9300 with normal internet GPRS plan??

How to get whatsapp on BBCurve 9300 with normal internet GPRS plan??

Download the iTunesSetup package on the laptop, and then move it to the Dell. You may need to hook up the iPod to an Internet-enabled computer initially so that it has the correct firmware without storing the iTunes library on that computer.
(30551)

HT4623 how to get started connected with laptop with net connection but announcement is to try using wifi ,try again over mobile please help me

Similar Messages

Maybe you are looking for