HT4623 HOW TO KNOW MY I PAD MODULE

i buy a new i pad and i want to know what`s my module ?

See:
Identifying iPad models
BTW, this is the iPod touch forum

Similar Messages

HT4623 how to know my phone factoer unloack or not

how to know my phone factoer unloack or not

IF you bought it subsidised from a carrier and the carrier has not unlocked it then it is still locked If you bought it from an apple store unlocked then it is unlocked. Try putting in a sim card form another carrier and if th ephone works then it is unlocked

How to know if linux-uvc module is loaded for chicony webcam?

i have a integrated chicony webcam...iam not sure how to find if linux uvc module is working

lsmod should do the job, yea
lsmod | grep uvcvideo
If that's working, you can try your cam with luvcview

How to know Functionalilty of Function Module

Hi all,
I have found a Function Module use in one of the report program 'RPY_FUNCTIONMODULE_READ' However I don't know the functionlity of this FM. There is no Function Module Documentation available. how do i go about it.

Sanjay,
If the FM does not come with any doco, then there is no information about it in SAP (despite SAP saying that there is no doc available in EN - I logged on in Gernam and it said that there was no doco available in DE!). Generally if I want to find out how a FM works, I debug it, or ask the good people here on SDN! If all else fails there is always Google!
Cheers,
Pat
PS. 'RPY_FUNCTIONMODULE_READ' has a Documentation parameter but this passes out only the Parameters and their descriptions.

HT4623 how to know an iphone 3gs is factory unlocked or not ?

dear apple
i came to buy an iphone 3gs from a friends ,
but there is a problem , i want to know if it is factory unlocked or not . how can u help me plz

Apple are not here.
Ask your friend, try different SIMs in it, or call AppleCare and ask.

How do i know whether my adapter module is working or not?

Hi
I have written one Adapter Module and i have given that module in Communcation Channel.
1.How do i know whether my module is working or not.
2.How do i atleast my adpater module is calling or not?
Please help me its very urgent
Best Regards
Ravi Shankar B

Hi Ravi Shankar,
Since u had written the module, u must have deployed the module on the adapter engine. Now follow this procedure:
1. Set the breakpoint on the "process" method of ur java code.
2. Put ur code into Debugging mode.
3. Place the file again and try running ur scenario
If the executuin stops at the method "process", then this means that ur module is getting called and there is some error in ur code.
If the execution is not stopped there, then that means ur module is not visible to XI adapter engine. So either it is not properly deployed or there is some problem while developing it.
Regards,
Prateek

How to know the Function Module of a standard datasource?

Hi All,
As per my understanding there will be an underlying Function Module for each SAP BI datasource. But I dont know how to know the name of that Function Module for a particular datasource.Could anybody pls help me as i am need of this urgently.
Thanks in advance.
Regards,
kp

Run transaction RSO2 and enter the required datasource whether transaction data, MD attributes or Text then click on display. In the message pain and the bottom of the gui it will tell you which function module said datasource uses for extraction.
Cheers
Craig

How I know if there notification for each transaction in each module

dear Consultant's
How I know if there notification for each transaction in each module and if it's enabled or need to enable
For example:
In AP:
When I create, transaction is there any notification send
When I create payment term is there any notification send
How I know what the standard oracle notification create for each module
thanks for caring

I can't believe there's still no proper answers for this question . I'm now struggling with the same issue as the original asker. It seems that at least with the newest version of Nokia Drive you can delete the maps saved (without the need to remove the whole application). You can do that even one by one. But the question is: "If I delete a particular map and load it again, will that be the newest version of the map? Or is there still a need to delete the whole Nokia Drive application, as said in the instructions linked earlier in this thread?"
Anyway, even deleting one map and loading it again sounds very frustrating without knowing if there actually is a new update or not. We should know exactly which is the current version of each map and wheter there is a newer version.
Many things are gone worse after Symbian. On Symbian phones, you could easily update all the maps with Ovi Suite. Now, with Zune, you can update the firmware, but not the maps which was a disappointment to me. I don't have WiFi connection, so, for me, it would be cheaper to download huge amounts of data with my computer's wired connection (with my phone connected to it via USB). Don't want to waste my monthly data limit to download again possibly the same map versions just to be sure...
But please, moderators and others, give us some comments and answers...
Loyal Nokia owner

Does anyone know how to print from my pad to my desktop?

does anyone know how to print from my pad to my desktop?

A desktop is not a printer. Your question is not clear. Explain what you are trying to do.
iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

How to know each field function in sap mm module ?

how to know each field function in sap mm module ?
i know by press f1 but any easy way that to brief explanation.

Dear Ramakrishna,
What you have mentioned is correct.
Press F1 to find out the meaning of that field and you can also refer this link to know more about MM
Module,
http://help.sap.com/saphelperp60_sp/helpdata/en/9c/df293581dc1f79e10000009b38f889/frameset.htm_
http://www.sap-img.com/
Regards
Mangalraj.S

How to port Stellaris launch pad microcontroller LM4F120XL processor into labvie

How to port Stellaris launch pad microcontroller LM4F120XL and Tiva ARM cortex processor into labview

Hello KateB
I have followed all the instructions on the page http://www.ni.com/white-paper/6994/en
but i was failed for this ARM cortex M4 processor (TI stellaris board).
Finally i am able to blink the LED on the Stellaris launch pad - I dont know what happen to my project files, again its not working...
I need proper instructions to develop projects on stellaris launchpad. please help me regarding this.
Is there any way to extend the evaluation version for Embedded module for ARM microcontroller on labview.
The cost is too high - http://sine.ni.com/nips/cds/view/p/lang/en/nid/209852
By the way the link you provided is not working.
http://sine.ni.com/nips/cds/view/p/lang/en/nid/205040,
Thank for the reply.
kiranvarma - npeducations

How to make a normal Function Module remote able function module

Hi guys,
i am a beginner in abap programming. I have made a programm in Se80 which shows all the nodes of the active hierarchies (5 stk.)
in a ALV grid. Therefore i am getting the active hierarchies from table "rshiedir" and use the normal function module "RSSH_HIERARCHY_READ" to display the nodes of the hierarchie. The problem is the hierarchies do have a different techical name in the systems (development-acceptance-productive) but the descriptive nbame is the same in all systems. Because of the difference of the technical names I can use this programm in just one system. But the hierarchy content should be comparable and be displayed in all three systems. Therefore i would like to create a remoteable function module which covers the normal one. Can i do this and how can i create a remoteable function module and use it?
If not do you know any remotable functgion module which gives back all the nodes from an active hierarchy in table "RShiedir".
Thanks and kind regards,
Murat

Hello,
Simple, create a wrapper RFC (similar to 'RSSH_HIERARCHY_READ' ) & call the normal FM 'RSSH_HIERARCHY_READ' inside the wrapper.
Something like this:
FUNCTION z_rssh_hierarchy_read.
*"*"Global Interface:
*" IMPORTING
*"     VALUE(I_RSHIEDIRKEY) TYPE RSHI_S_RSHIEDIRKEY OPTIONAL
*"     VALUE(I_RSHIEDIRLOG) TYPE RSHI_S_RSHIEDIRLOG OPTIONAL
*"     VALUE(I_DATE) TYPE RSHI_DATE DEFAULT SY-DATUM
*" EXPORTING
*"     REFERENCE(E_RSHIEDIR) TYPE RSHI_S_HIEDIR
*"     REFERENCE(E_T_RSNODES) TYPE RSHI_T_HIENODE
*"     REFERENCE(E_TH_RSINTERVAL) TYPE RSHI_TH_INTERVAL
*"     REFERENCE(E_DUPLICATE_LEAFS) TYPE RS_BOOL
*"     REFERENCE(E_T_RSNODES_LNK) TYPE RSHI_T_HIENODE
*" EXCEPTIONS
*"      INVALID_HIERARCHY
*"      NAME_ERROR
*"      IOBJ_NOT_FOUND
" Don't forget to add TYPE-POOLS rshi to the FuGr. TOP include
CALL FUNCTION 'RSSH_HIERARCHY_READ'
    EXPORTING
      i_rshiedirkey     = i_rshiedirkey
      i_rshiedirlog     = i_rshiedirlog
      i_date            = i_date
    IMPORTING
      e_rshiedir        = e_rshiedir
      e_t_rsnodes       = e_t_rsnodes
      e_th_rsinterval   = e_th_rsinterval
      e_duplicate_leafs = e_duplicate_leafs
      e_t_rsnodes_lnk   = e_t_rsnodes_lnk
    EXCEPTIONS
      invalid_hierarchy = 1
      name_error        = 2
      iobj_not_found    = 3
      OTHERS            = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Here Z_RSSH_HIERARCHY_READ is the wrapper RFC. Hope you get the point.
BR,
Suhas

How to check for a function module with its description and functionality

Hi all,
How to check for a function module,with its description and its functionality,in detail how can I know the purpose of a particular function module,how to search for a function module which suits my requirement .

Hi,
You can search a FM of your requirement by putting in the Key words and searching for a FM. Like * KEYWORD * and then pressing F4.
Say for example you need to search something regarding converstion.
Search for * CONVERT * and press F4.
If there is something specfic like converting date to something you can give
DATE * CONVERT *
OR
CONVERT * DATE * and press F4.
Once you narrow down your search you will have a Function module documentation inside the Function module. Please note that all the FMs willl not have documentation.
Regards,
Pramod

How do I call an Application Module method from a EntityImpl class?

Guys and Gals,
Using Studio Edition Version 11.1.1.3.0.
I've got a price update form, that when submitted, takes the part numbers and prices in the form and updates the corresponding Parts' price in the Parts table. Anytime this Parts view object's ReplacementPrice attribute is changed, an application module method needs to be called which updates a whole slew of related view objects. I know you can modify view objects via associations (How do I call an Application Module method from a ViewObjectImpl class? but that's not what I'm trying to do. These AppModuleImpl methods are the hub for all price updates, as many different operations may affect related pricing (base price lists, price buckets, etc) and hence, call the updatePartPricing(key) method.
For some reason, the below code does not call / run / activate the application module's method. The AppModuleDataControl exists and recordPartHistory(key) is registered and public. At runtime, the am.<method> code is simply ignored, and as a weird side-effect, I cannot navigate out of my current page flow.
public void setReplacementPrice(Number value)
    setAttributeInternal(REPLACEMENTPRICE, value);
    AppModuleImpl am = (AppModuleImpl)this.getDBTransaction().findApplicationModule("AppModuleDataControl");
    Key key = new Key(new Object[]
        { getPartNumber() });
    am.recordPartHistory(key); // AppModuleImpl method which records pricing history
    am.updatePartPricing(key); // AppModuleImpl method which updates a whole slew of related pricing tables
}Any ideas?

Thanks Timo.
Turns out the code provided was correct, but the AppModuleImpl method being called was not. A dependent ViewObject wasn't returning the row I was expecting. I then tried to perform some operations on that row, which in turn ... just stopped everything, but didn't give me an error.
It was the lack of the error that threw me off. I had never messed with calling an AppModuleImpl method from the EntityImpl so I assumed that's what was messing up.
You are correct. It is available from the ViewRow, but I thought it better to put it in the EntityImpl. This method will be called every time the replacement cost is modified. If I didn't put it in the EntityImpl, I'd have to remember to call it every time a replacement cost changed.

How to know the class method behind an enterprise service

Hi,
SAP has provided enterprise services for Room booking in Real Estate module. They are even shipping the complete application for a nominal price. But the standard version is not suitable for our client requirement so they want to develop this application inhouse.
Now my question is: I know the enterprise services used in this application. How to know the implementing methods behind these enterprise services ?
If possible suggest which approach will be a better option for the inhouse development.
1. Webdynpro ABAP and use directly methods behind the enterprise services.
2. Webdynpro ABAP and create client proxy class for the enterprise services.
3. Webdynpro JAVA and use the enterprise services.
4. Using visual composer modelling the application.
Please suggest the best alternative.
Best Regards,
Aleem Mohiuddin.

Hi
They are even shipping the complete application for a nominal price. But the standard version is not suitable for our client requirement so they want to develop this application inhouse.
I assume you are talking about xApps.
How to know the implementing methods behind these enterprise services ?
In sproxy transaction you can search service and then you can see class and method implemented behind that particular service.
1. Webdynpro ABAP and use directly methods behind the enterprise services.
In my opinion not recommended to bypass ES and use method behind it.
2. Webdynpro ABAP and create client proxy class for the enterprise services.
Not sure why you want to create proxy of ES.
3. Webdynpro JAVA and use the enterprise services.
4. Using visual composer modelling the application.
You can use either Webdynpro (ABAP or Java) or VC to model your application which consume ES in backend. Both options are good, you can chose Java or ABAP flavor of dynpro based on skill available in team. VC is very effective in rapid modelling and can be used in protyping or in development of complete application.
Regards,
Gourav

HT4623 HOW TO KNOW MY I PAD MODULE

Similar Messages

Maybe you are looking for