HT4623 how to send messages in bulk

how to send messages in bulk

HI,
In the View Menu once you have a Chat window open is the Messages item which allows you to change the style of the IM.
However this still sends a HTML like packet for dispalyiing the info at the other end.
This does not work to ICQ users.
Chax, an iChat Add-on, works in iChat 5 and lower (although there are then different versions) and can strip out the HTML part for sending to ICQ users.
However there is not yet a Lion/iChat 6 version.
8:43 PM Monday; December 12, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Similar Messages

In solman 4.0 how to send message to SAP through service desk

Dear all,
I have configured service desk functionality, My requirement is from service desk how to send message to SAP.
Regards,
Pavan.

Hi,
Following the steps:
Basic configuration - RFC Connections to SAP
Check if the RFC Connectino SAPOSS is working properly
Check if load distribution group is set to EWA
The RFC Connections:
- SAP-OSS (Send Message to SAP)
- SAP-OSS-LIST-O01 (Update Message from SAP)
will be created automatically by the system with a user which has been assigned
previously.
IMG Path: SAP Web Application Server | SAP Web Application Server | SAP Solution Manager| Basic Settings | SAP Solution Manager System | Connection to SAP | Assign user for forwarding Service Desk Message
With transaction SM59 you can adjust the RFC connections.
- For further information on SAP R/3 Front-end connections, see SAP Notes: 33135, 766505, 24177
- To forward Service Desk notifications and Issues to SAP, you need to assign a user to the SAPNet R/3
Front-end connection to SAP.
Activities:
- 1. From the SAP Solution Manager (transaction SOLUTION_MANAGER), choose (Edit-> Global Settings.
- 2. Choose Display<->Change.
- 3. For SAP Service Marketplace, specify http://service.sap.com as the URL.
- 4. In the Connection to SAP tab, specify SAPOSS as the RFC destination. Note that the entry is casesensitive.
- 5. For User forwading messages, enter a valid user and a password. This user will require all the authorizations for SAPNet R/3 Front-end for your customer number.
- 6. Save your changes.
The system automatically generates the following RFC destinations and assigns the S-User and password you specified: SAP-OSS, SAP-OSS-LIST-O01
Good Lucky!

How to send messages in iChat in plain text? (no html)

How to send messages in iChat in plain text? I don't need any formatting nor hiding links in achor tags.

HI,
In the View Menu once you have a Chat window open is the Messages item which allows you to change the style of the IM.
However this still sends a HTML like packet for dispalyiing the info at the other end.
This does not work to ICQ users.
Chax, an iChat Add-on, works in iChat 5 and lower (although there are then different versions) and can strip out the HTML part for sending to ICQ users.
However there is not yet a Lion/iChat 6 version.
8:43 PM Monday; December 12, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to send message to a multi-consumer queue using pl/sql

How to send message to a multi-consumer queue using pl/sql ? Thanks.
I tried following, but got an message: no receipient specified.
DBMS_AQ.ENQUEUE(
queue_name => 'aqadm.multi_queue',
enqueue_options => queue_options,
message_properties => message_properties,
payload => my_message,
msgid => message_id);
COMMIT;
END;
/

Here's two way to enqueue/publish new message into multi-consumer queue.
(1) Use explicitly declared recipient list
- Specify "Recipients" by setting recipient_list to messge_properties, before ENQUEUE().
DECLARE
recipients DBMS_AQ.aq$_recipient_list_t;
BEGIN
recipients(1) := sys.aq$_agent('RECIPIENTNAME',NULL,NULL);
message_properties.recipient_list := recipients ;
(2)Or, declare subscriber list permanently. Then you need not to specify recipient list each time you call ENQUEUE().
begin
dbms_aqadm.add_subscriber(
queue_name=>'YOURQUEUE',
subscriber=> sys.aq$_agent('RECIPIENTNAME', null, null)
end;
You can add 1024 local subscriber include maximum 32 remote-queue-consumer to one queue.

How to send messages via shareobject in FMS

How to send messages via shareobject in FMS
I need some codes.
I want to send some string messages via shareobject, the
string messages can be retrieve in client.
Can you give me some codes? Thank you for your help..
/

Thanks for your comment.
en....I want to do something..I will maintenance a users list
in charroom.
I write a function in main.asc file , client can get users
list via call the function.
I write some codes in application.onConnect
when a user connect, it will add users list.
In application.onDisconnect, when a user disconnect, it will
remove from users list.
My hope when a user disconnect, I send a message to
shareobject. the shareobject is called in other clients.
Other client can retrieve the remove user message, they will
call the function to get new users list.
It is my idea. Can you give me some codes for my idea?
Thank you very much.

I don't know how to send message to my friends via message

I downloaded mountain lion yesterday but I don't know how to send message to the imessage on ipad or iphone. The account of my friend's seems doesn't work and I have no access to sending message to that account.

Welcome to Apple Communities
Press the + button to select a contact. Then, write whatever you want in the white box and press Enter key. You can use it with contacts with iPhone, iPod touch, iPad or Mac with Mountain Lion

How to send message to MDB from different clients.

Hi,
I want to know how to send message to a Message Driven Bean residing in EJB container from
1. Web Component
2. Application Client
3. Another Entity Bean
4. Non J2EE client.
If you provide me any tutorial link on this it would be really helpful.
Thanks for the time.

Hi,
refer to http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/MDB.html#74108
Seetesh

How to send message to non android mobiles?

I am not able send SMS to other mobile etc. SMS are being sent as iMessages only to apple products. How to send messages to others?

The iPad cannot send SMS texts - it is not a cellular phone, and SMS texting is a cellular phone feature (SMS uses the voice channel to send).
You will have to get a 3rd party app to send SMS texts by internet - check the App store for what is avaialble.
You can also send SMS texts as email if you know the persons phone number and their carrier, using their carrier's email-to-text gateway
see http://en.wikipedia.org/wiki/List_of_SMS_gateways for a list of carriers and their gateway addresses.

How to send message/traffic accross VME bus from NI's VME MXI-2 card So I can monitor messages via vmetro card?

Hi,
How to send message/traffic accross VME bus backplane from NI's VME MXI-2 card?
So that I can monitor messages via vmetro card/BusView?
Thanks
DBhagat

Hi Dbhagat,
The VME-MXI-2 card is a type of VME controller, which is used in conjunction with a PCI-MXI-2 card that will be in an external computer. This computer is then able to send and receive messages to other devices on the VME bus, as well as monitor the information on the bus.
Hope this helps!
john
Applications Engineer

How to send message to another ipod user

Hello Team ,
Please help me to understand , how to send message to another user of Ipod
I am having ipod 4G touch , So please guide me on this .
also Can we pair ipod to any bluetooth head set , Curretnly i having Samsung strero phone head phone model no SBH650 .
Please help me ....
Thank you
Regards
Mahesh

Hi
Please check FM <b>TH_POPUP</b>
Is this what you require ?

How to send messages to the specified user through sap

how to send messages to the specified user through sap

Hi Santosh,
try:
    CALL FUNCTION 'TH_POPUP'
         EXPORTING
              CLIENT         = SY-MANDT
              USER           = BNAME "User you want
              MESSAGE        = MSG "text you want
         EXCEPTIONS
              USER_NOT_FOUND = 1.
Regards, Dieter

How to Send message to MQ without using JMS Receiver Adapter

Hi Frnds,
Actually i am working one File to JMS scenario,I have to send message to MQ,What are the different ways we can send message to MQ without using JMS Adapter.
Regards,
Raj

Hi Ramesh,
Thanks for your replay,could you please eloborate how to integrate that one with XI,and how to use in XI?
regards,
raj

How to send message to pager in pl/sql?

Hi all,
I can send message to my local email address using utl_smtp.
But i can NOT send message to my pager.The following error happened:
ERROR at line 1:
ORA-29279: SMTP permanent error: 550 5.7.1 Unable to relay for
[email protected]
ORA-06512: at "SYS.UTL_SMTP", line 17
ORA-06512: at "SYS.UTL_SMTP", line 98
ORA-06512: at "SYS.UTL_SMTP", line 240
any advice will be appreciated.

Sound like the "how to" is ok for your code. If you can send email successfully with UTL_SMTP then your code is most likely fine.
Unable to relay for [email protected]
tells me the SMTP server will not send ("RELAY") ANY messages to that address. Most mail servers setup on db boxes have a set of restricted addresses that the mail server can send to.
Talk to the system administrator to open that email address for the SMTP box.

How to send message from multiline container to same webservice or bus. sys

Hi All,
I want to send message from multiline container to a syn web service sequentially.
I am getting that multiline container after a transformations step (1: n mapping).
where i dont known what will be the value for n (number of message in multiline container). This will vary; depend upon input message to BPM.
Scenario is like this.
1. Receive step
2. Transfromation to 1: n
3. Want to send message from multiline container to a web service (business service),default loop and block step doesnt give desirable result.
any help will be appreciable
Regards,
Adish

Adish Jain wrote:>
> where as, if I will use block, it will send the same message to multiple receivers which are present in multiline receiver container. So need to think in different manner.
Not necessarily.
When you use block step in ForEach mode, you can select the container variable from:
- a receiver container;
- an interface container;
The line element can then be either a receiver or an interface.
The problem is that for this to work, the interfaces need to be async (since they are to be used as containers) and hence you won't be able to make your scenario work.
But again, explain why your scenario with loop step didn't work.
The only gap here is how to determine the number of loops (defining the counter variable value). But that can be easily solved if you include a new message with occurrence 1 as a target message of your mapping and as a container in your bpm.
This new message needs only 1 single field, that should be filled with the number of messages you've created in the mapping (you could use count standard function, f.ex.).
In your bpm, make sure to pass this fields value into the counter container right after your transformation step.
Regards,
Henrique.

How to send message to MessageDrivenBean from Session bean in JDeveloper

HI I am trying to write a sample program using JDeveloper.
I am trying to do these steps
1) client class which gets Session bean and calls its method.
2) write Stateless Session bean with a method which gets MDB and sends message.
3) write Message Driven Bean ( which prints message recieved from Session bean )
Set up
=======
jms.xml
{JDevHome}\jdev\system9.0.5.2.1618\oc4j-config\jms.xml : changed jms.xml file and included
     <topic name="Demo Topic" location="jms/theTopic">
          <description>A dummy topic</description>
     </topic>
     <topic-connection-factory name="Demo Topic Connection Factory" location="jms/theTopicConnectionFactory">
          <description>A dummy topic connection factory</description>
     </topic-connection-factory>
orion-ejb-jar.xml:
edited MDB entry to
<message-driven-deployment name="MessageLogger"
destination-location="jms/theTopic" connection-factory-location="jms/theTopicConnectionFactory">
</message-driven-deployment>
Implementation
===============
In client class:
I am getting session bean like
Properties props = System.getProperties();
props.put( javax.naming.Context.INITIAL_CONTEXT_FACTORY , "com.evermind.server.rmi.RMIInitialContextFactory");
props.put( javax.naming.Context.SECURITY_PRINCIPAL , "admin" );
props.put( javax.naming.Context.SECURITY_CREDENTIALS,"welcome");
props.put( javax.naming.Context.PROVIDER_URL ,"ormi://localhost:23891/current-workspace-app");
Context ctx = new InitialContext(props);
MySessionHome home = (MySessionHome)
          javax.rmi.PortableRemoteObject.narrow(obj, MySessionHome.class);
This part works fine, and I am calling method on session bean created out of home.
In Session bean:
I want to get TopicConnectionFactory and tried these two ways:
a)
getting the context by setting new environemnt values like
Properties props = System.getProperties();
props.put( javax.naming.Context.INITIAL_CONTEXT_FACTORY , "com.evermind.server.jms.EvermindConnectionFactory");
props.put( javax.naming.Context.SECURITY_PRINCIPAL , "admin" );
props.put( javax.naming.Context.SECURITY_CREDENTIALS,"welcome");
props.put( javax.naming.Context.PROVIDER_URL ,"ormi://localhost:9227/current-workspace-app");
Context ctx = new InitialContext( props);
When I try this,it is complaining that it cannot instantiate EvermindConnectionFactory.
I am not sure which factory class we have to use here.i tried all the Factory class in that package.but didn't worked.
next I used,
b)
tried to use default context in session bean to get MDB factory
String TOPIC_NAME="jms/theTopic";
String TOPIC_CONNECTION_FACTORY="jms/theTopicConnectionFactory";
TopicConnectionFactory connectionFactory = (TopicConnectionFactory)new InitialContext().lookup("java:comp/env/" + TOPIC_CONNECTION_FACTORY);
this gives
04/06/13 23:46:09 javax.naming.NameNotFoundException: jms/theTopicConnectionFactory not found in MySession
04/06/13 23:46:09      at com.oracle.naming.J2EEContext.getSubContext(J2EEContext.java:93)
this may be because JMS server runs on different port than other EJBs and have different namespaces.
Can any body give info,how we can make use of Message Driven bean from a Session Bean or from a JSP page or from a simple class inside JDeveloper.
Thanks in advance.
gopal

Hi,
There are some hints in this forum for how to do this.
I put together and make it working.
This example creates an MD Bean and have a simple message and a client class send messages to that bean.
Steps
=====
1)
a)in {JDev Home}\jdev\system9.0.5.2.1618\oc4j-config\jms.xml
     <topic name="Demo Topic" location="jms/demoTopic">
          <description>A dummy topic</description>
     </topic>
     <topic-connection-factory name="Demo Topic Connection Factory" location="jms/theTopicConnectionFactory">
          <description>A dummy topic connection factory</description>
     </topic-connection-factory>
b) in current project in orion-ejb-jar.xml
go to orion-ejb-jar properties and add these values there to MDB node
destination-location=jms/demoTopic
connection-factory-location=jms/theTopicConnectionFactory
2) create a dummy session bean and a dummy client for that session bean
This sets default configuration for the client application we write
doing so we do not need to set properties to get Initial context.It makes use of
{JDev Home}\jdev\system9.0.5.2.1618\oc4j-config\.client\jndi.properties
We can directly get Contexxt ctx = new InitialContext();
3) Create MDB and put this sample code in method
onMessage()
TextMessage tm = (TextMessage) msg;
try {
String text = tm.getText();
System.err.println("Received new message : " + text);
catch(JMSException e) {
e.printStackTrace();
4) go to properties for the MDB and set Destination to Topic
5) write Client code
Context ctx =new InitialContext();
// 1: Lookup ConnectionFactory via JNDI
TopicConnectionFactory factory =
(TopicConnectionFactory) ctx.lookup("jms/theTopicConnectionFactory");
// 2: Use ConnectionFactory to create JMS connection
TopicConnection connection = factory.createTopicConnection();
// 3: Use Connection to create session
TopicSession session = connection.createTopicSession( false, Session.AUTO_ACKNOWLEDGE);
// 4: Lookup Desintation (topic) via JNDI
Topic topic = (Topic) ctx.lookup("jms/demoTopic");
// 5: Create a Message Producer
TopicPublisher publisher = session.createPublisher(topic);
// 6: Create a text message, and publish it
TextMessage msg = session.createTextMessage();
msg.setText("This is a test message from My Test Client!!! .");
publisher.publish(msg);
6) Run the server and run the client

HT4623 how to send messages in bulk

Similar Messages

Maybe you are looking for