HT4623 how to update firmware

i am tryin to update firmware on my ipod touch 1g and cant find results anywhere

The 1G can only go to iOS 3.1.3 that you get here:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

Similar Messages

  • How to update firmware for SSD Toshiba Air 2012

    How to update firmware for SSD  Toshiba THNSNS128GMFP ??
    My disk see on system as  SandForse 200026BB  33Kb

    https://discussions.apple.com/message/22108992#22108992
    https://discussions.apple.com/thread/5120950?start=0&tstart=0
    https://discussions.apple.com/message/22649139#22649139
    https://discussions.apple.com/thread/5300125?tstart=0
    Seems to be a real issue. Here's to hoping Apple will address this issue sooner rather than later.

  • HT1222 how to update firmware

    how to update firmware for iphone 4?

    It says that your have the latest firmware (5.0.1) for your iPhone but to update your iPhone plug it into your iTunes and click on check for updates or since your have the lastest firmware just go to Settings -> General -> Software Update.

  • HT4623 how to update ipad to ios 5

    how do i update ipad 2 to ios 5

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • HT4623 How to update to ios5

    How do I update my iPad2 to IOS5?

    See
    iOS 5: Updating your device to iOS 5
    http://support.apple.com/kb/HT4972
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
    Tip - You may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • HT4623 How do update my ipad 2 if my OS is prior to 5.0, it does not have the software update dropdown.

    How do I update my ipad 2 if my OS is prior to 5.0, it does not have the software dropdown

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
        1.    Go into the iPad's Settings.
        2.    Locate and tap "General" from the menu on the left.
        3.    The second option from the top is "Software Update". Tap this to move into the update settings.
        4.    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
        5.    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
        1.    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
        2.    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
        3.    After canceling the dialog box, iTunes should automatically sync with your iPad.
        4.    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
        5.    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
        6.    From the iPad screen, click on the Update button.
        7.    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
        8.    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

  • How to update firmware for HP Compaq DC small form factor

    I have HP Compaq dc7700 small form factor, Windows xp pro. It was bought on ebay and works fine except for one thing. The Bios was upgraded  but the firmware is not upgrading. the Bios was upgraded to V3.05 but the firmware remains 2.04
    I downloaded al the updates and firmware and followed instructions but I seem to have problems updating the firmware. I would like to know how to do this step by step because the instructions I read seems to be missing some steps. my question is how to update the firmware. I did read the instructions but could not get it updated. either updating via windows or in dos, I can't seem to make it successful. There are two error messages,
    1. ME BIOS Extension module has halted. Update BIOS or Management Engine firmware if problem persists.
    2. Amt mamagement engine is disabled.

    HP normally uses the term BIOS to refer to motherboard/CPU "firmware" updates and Firmware to refer to other device "firmware" updates... Below is a list of the two classes of firmware;
    BIOS 
    Business Desktops BIOS Utilities 4.02 Rev. A
    Microcode Update for HP 786E BIOS Family Computers with Intel Processors 1.06 Rev. A
    HP Compaq Business Desktop ME Firmware Update and Utilities 2.2.30.1046 Rev. A
    HP Compaq dc7700p Business Desktop System BIOS for Intel vPro Technology (786E1 BIOS) 3.05 Rev. A
    HP Compaq Business Desktop System BIOS (786E1 BIOS) 1.15 Rev. A
    Firmware
    Western Digital 7200-rpm Hard Drive Firmware Update 3.03E03 Rev. A
    Intel PRO/1000 Firmware 1.10 Rev. A
    HP Optical Drive (TSST H353B DVD-ROM) Firmware Update BC08 Rev. A
    HP Optical Drive (TSST H653N DVD-RW) Firmware Update HB02 Rev. A
    Seagate Hard Drive Firmware Upgrade for 500-GB Barracuda 7200.11 HP13 Rev. A
    ATI X1600XT Graphics Card Video BIOS Update S3A67124.104 Rev. A
    Samsung Hard Drive Firmware Upgrade - SATA Drives 42_51 Rev. A
    Please identify the exact device you wish to upgrade/update the firmware to.
    Frank
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • How to update Firmware on a Mac?

    How to Update the Firmware of my HP LaserJet P2055dn connected via ethernet to my Mac?
    The Download just leave me with a .rfu file. How can I use this?
    This question was solved.
    View Solution.

    Hi,
    Below you may download the latest Mac Firmware Update utility:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
    Simply launch the file and follow the on-screen steps.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HT4623 How to update the 1st iPad

    I do I update my iPad ? It is the first version.

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • HT4623 how to update version iniso 4.3.3 to 6.1.4

    my phone is iphone 3GS.and is version iso 4.3.3 but now i want to update to 6.1.4.how to update version?

    The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848
    NOTE: The iPhone 3GS will update to 6.1.3, not 6.1.4.

  • HT4623 How to update iPad 1

    I have IPad1 want to download viber application which required iOS 4.3.  How to update?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • HT4623 How to update my iphone 3

    can u please tell me how to see what my operating system is and how to update my phone please

    To see the iOS level go to Settings > About > Version.

  • HT4623 How to update my iPad to iso 6?

    How to update my iPad to iso6 ?

    If yours is an iPad 1... then iOS 5.1.1 is as far as it will go.
    If a later Model of iPad... you can only update to the Current Version which is iOS 7.1
    March 2014

  • HT4623 How to update an iPhone with iOS 4

    I have already got an iPhone 4 that has been recently updated but I have now got my sisters old iPhone 4 as I smashed mine and she has never updated it how do you update it from iOS 4? Thanks

    UPDATING iOS
    Over the air updating of iOS needs iOS 5 or later
    The following link explains how to update
    This link explains  how to update using itunes
    This explains how to transfer purchases to your computer

  • HT4623 how to update my iphone version?

    i have iphone with 4.2.1 version how to i will update it into 4.3 or 5.11.?? please help me to update it..plssss

    The iPhone 3G can only Update to iOS 4.2.1
    Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
    If an Update Appears Install it... if not... you are up to date for your particular Device...
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

Maybe you are looking for

  • 5300 doesn't recognize headset

    Hi, Tried for the first time yesterday, plugging in the Nokia HS-47 headset that comes in the package with the 5300, and I get the message "not recognized", with the sound still coming from the phone while the headset's plugged in. If I plug in the 2

  • Menu with canvases!!!

    hi all, i have got a problem with canvases.I use one window all canvases.I try to make a menu with canvases.I have more than one canvases.One is vertical canvas for menus on the left,Stack canvases for their submenus and a content canvas for other op

  • Warehouse management Cycle counting

    Hi All , I am trying to create an inventory record for cycle counting  in transaction LICC. But it is not allowing me to do so and giving error as "Maintain number range interval "01" for inventory" . Can anybody tel me the SPRO path OR tcode where i

  • Workflow problem during upgrade ?

    Hi, We are Upgrading the system from 4.6C to ECC6.0. What kind of general problem will happen to workflow during upgrade? So that we would take necessary precautions. Thanks! Richard A

  • Inbound email in interaction record

    Hi experts, I use workflow WS 14000164 to process incoming email. I would expect somehow to have the mail in BP interaction record. I can see the workitem and the attached email in WebClient Inbox but I do not see it in interaction record. Which solu