HT4623 how to update from 4.2.1 to 4.3

I want to upgrade my iphone from ios 4.2.1 to 4.3

iOS 4.2.1 is as high as an iPhone 3G can go.

Similar Messages

  • HT4623 how to update from version 4.1 to 6.0

    how to update from version 4.1 to 6.0

    What do you mean unlocked one?  You are talking about software updates here and software updates are free and for a 3gs you can only update to 6.1.3 as you have already been told.
    If you are talking about phones themselves, then this is totally different and you need to be more specific or get your question right.
    There is no unlocked software update - it s free.

  • HT4623 How to update from my iPod iOS  version if I have a version 4.3.2 and update it only from the iPod I know how to do it from the pc

    How to update from my iPod iOS  version if I have a version 4.3.2 and update it only from the iPod I know how to do it from the pc

    There are no specific instructions for your problem. If you use this it tells yo what is inside and how to take it apart.
    http://www.ifixit.com/Teardown/iPod+Touch+4th+Generation+Teardown/3562/1
    One of the nine guides here will tell yo how to put it back together and how to do specific things.
    http://www.ifixit.com/Device/iPod_Touch_4th_Generation

  • HT4623 How to update from iOS 5.1.1 to 6 or 7

    I need to update my software from 5.1.1 to the 6.0 version then the system can then update to a 7.0 automatically.
    Thanks
    JB298

    If you have an iPad 2 or newer, go to Settings - General - Software Update.
    If you have an iPad 1 you can not upgrade beyond 5.1.1.

  • HT4623 how to update from 4.3.3 to 5.1.1 without going to 6.0.1?

    Im trying to update to 5.1.1 im looking for no jailbreak or antyhting like that.. 6.0.1 infact 6.0 isnt for me.. i want able to update due to no pc and i just got one. I was wondering is there a way to upgrade to only 5.1.1 without going into 6.0 +?

    No, unless you're using a third generation iPod touch, which can run 5.1.1 but not 6.
    (71620)

  • HT4623 When i go to Settings General there is no option for software update.  Can anyone tell me how to update from 4.2.6

    Can anyone tell me how to update from 4.2.6? 

    Check to make sure you don't have two firewalls (i.e. a Windows firewall and one on your router).
    If that's not it, you may need to dig deeper ... like temporarily changing your router's DNS to use Google's DNS or OpenDNS instead of your ISP's DNS.  Or maybe open up a certain port on your router (not sure which one that would be though, sorry).  Or, if your computer is connected to the internet over wi-fi, try connecting to your router (or modem) via Ethernet, I heard of that solving a problem like this (though I can't confirm if that was real).

  • How to update from 4.2.1 to iso 5 or higher

    how to update from iso 4.2.1 to iso 5 or higher. Not able to download certain apps that are iso 5 and higher. Need help please

    The iPhone 3G can not be upgraded beyond 4.2.1.

  • HT4972 how to update from 4.3.5 to ios 5

    how to update from 4.3.5 to ios 5

    Connect to iTunes on the computer you usually Sync with and check for Updates...
    Full Details Here  >  Updating to iOS 5  >  http://support.apple.com/kb/HT4972

  • HT3406 How to update from 3.1.3 ver to a higher ver.

    How to update from 3.1.3 ver to a higher ver.

    Update it from iTunes on a computer as described at the bottom of this article; devices running an iOS version prior to 5.0 can't be updated straight from the device. It will be updated to the newest iOS release supported by the device’s hardware.
    The maximum iOS version for the original iPhone and first generation iPod touch is 3.1.3.
    (90364)

  • How to update from 3.1.3 to 4.3.3, but not to 4.3.5?

    Hi, I want to know how to update from 3.1.3 to 4.3.3, while the newest iOS version is 4.3.5
    I think Apple won't let me update to 4.3.3. Does anybody know how to do it?
    Your answer would be deeply appreciated. Thank you

    UPDATE TO IOS 4.3 MANUALLY(CANNOT UPDATE TO 4.3 BY APPLE SOFTWARE UPDATE)
    FIRST= Download the iOS 4.3 IPSW file for your device FROM NET
    SECOND- Connect your device to the computer using the USB cable and wait for iTunes to detect it.
    THIRD- Once your device has been detected – follow the steps given below for different OS.
    For Windows – Hold the Shift key and then click on the "Check for Update/Update" button.
    For Mac OS X – Hold the Option key and then click on the "Check for Update/Update" button.
    4-
    In the next dialog browse to the file that you downloaded from Step 1 and select the IPSW file.
    5
    iTunes will now use the IPSW file and update your device to iOS 4.3. The process should take around 10-20 minutes.
    That’s it. Your device will be updated to iOS 4.3 with ease.

  • HT4972 how about updating from 2.2.1 to anything

    how about updating from 2.2.1 to anything. I get an unknown error message and cannot go any further.

    Try on another computer
    Then see:
    -1 error
    -1 error too
    If still problem means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • HT4623 How to update ISO from 4.3.5 when Software is nowhere to be found?

    My iPad ISO version is 4.3.5(8L1). I followed the steps to go to General but do not see Software between About and Usage. Can anyone tell me what I can do in order to update my ISO?  My iPad is connected to wifi and a power source.

    See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
    IPhone, iPod Touch, and iPad iOS Compatibility Chart
         Device                                       iOS Verson
    iPhone 1                                      iOS 3.1.3
    iPhone 3G                                   iOS 4.2.1
    iPhone 3GS                                 iOS 6.1.x
    iPhone 4                                      iOS 6.1.x
    iPhone 4S                                    iOS 6.1.x
    iPhone 5                                      iOS 6.1.x
    iPod Touch 1                               iOS 3.1.3
    iPod Touch 2                               iOS 4.2.1
    iPod Touch 3                               iOS 5.1.1
    iPod Touch 4                               iOS 6.1.x
    iPod Touch 5                               iOS 6.1.x
    iPad 1                                          iOS 5.1.1
    iPad 2                                          iOS 6.1.x
    iPad 3                                          iOS 6.1.x
    iPad 4                                          iOS 6.1.x
    iPad Mini                                     iOS 6.1.x
    =====================================
    Select the method most appropriate for your situation.
    Upgrading iOS
       1. How to update your iPhone, iPad, or iPod Touch
       2. iPhone Support
       3. iPod Touch Support
       4. iPad Support
         a. Updating Your iOS to Version 6.0.x from iOS 5
              Tap Settings > General > Software Update
         If an update is available there will be an active Update button. If you are current,
         then you will see a gray screen with a message saying your are up to date.
         b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
         c. Resolving update problems
            1. iOS - Unable to update or restore
            2. iOS- Resolving update and restore alert messages

  • HT4623 I'm updating from 4 not 5 and under General it does not have a Software Update option. How do i update ???

    I'm updating from 4 not 5 and under General it does not have a Software Update option. How do i update ???

    To update the iOS to 5.1.1 from iOS version end prior to iOS 5 you must connect the iPad to a computer running iTunes.
    Start iTunes on the computer, connect the iPad, select the iPad in iTunes on the computer. If you are not automatically prompted to update select the General or Summary tab and then click on Check for Updates.

  • HT4623 how to update iOS 7 from iOS 7 beta for iphone5

    I have update iOS7 from iOS7 Beta by iTunes and I thank it not full version because it not same as my other device that update from iOS6

    Only if you have an iPod 5. iOS 7 requires 512MB of RAM, and sadly only the iPod 5 has 512MB of RAM. If you have a iPod 4 or earlier iOS 7 is not an option. If you check your iPod and it states your iPod iOS is current then you are at your max. Hope this helps, Good luck.

  • HT4623 How do update my ipad 2 if my OS is prior to 5.0, it does not have the software update dropdown.

    How do I update my ipad 2 if my OS is prior to 5.0, it does not have the software dropdown

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
    How to Upgrade to iOS 7
    The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
    There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
    To upgrade using Wi-Fi:
    Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
        1.    Go into the iPad's Settings.
        2.    Locate and tap "General" from the menu on the left.
        3.    The second option from the top is "Software Update". Tap this to move into the update settings.
        4.    Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
        5.    Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
    To upgrade using iTunes:
    First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
    You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
    Now you are ready to begin the process:
        1.    If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
        2.    Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
        3.    After canceling the dialog box, iTunes should automatically sync with your iPad.
        4.    If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
        5.    After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
        6.    From the iPad screen, click on the Update button.
        7.    After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
        8.    After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
     Cheers, Tom

Maybe you are looking for

  • Compiling packages in linux

    Hi I have been struggling with this for the last three days. I have tried multiple searches in the forums but cannot make head nor tail of setting the classpath in linux when compiling a package. in the following directory "/home/tamtam/Java/Course/U

  • Blue strobing display (Late 2008 15")

    I took a screen grab and checked it whilst the display was behaving, and it was normal, so it's not a problem with the GPU alone. Also, switching between the 9400M and 9600M doesn't solve it. It is intermittent and seems like all the blue pixels are

  • Video playback speeds up automatically?

    Hi all, I have a number of short cartoons for my cousins on my iPod nano (7th gen), but the longest video is giving me some trouble. It starts off fine, but about 10 minutes in, it starts to play as if it was on fast forward. Is there some kind of le

  • Alv grid layout as default.

    In an alv grid you can personalize the layout (Change layout, save layout). Is it possible to somehow add this saved layout to the report so that it will be shown as the defaylt layout for eveyone that runs the report? Best Regards Claes

  • [CS2/CS3] - kTextAttributes - StrokeBoss

    Hello everyone,    I'm using TextAttributeRunIterator for getting character properties of paragraph and I have problem to get information about "Stroke Weight", I found these Bosses connected with Stroke Width: kTextAttrPRAStrokeBoss & kTextAttrPRBSt