HT4623 I accidently disconnected to cord in the middle of updating software on my iphone4. it now has apple logo and blank loading line below. it will not do anything else. can't even switch off please help
I accidently disconnected to cord in the middle of updating software on my iphone4. it now has apple logo and blank loading line below. it will not do anything else. can't even switch off please help
Connect the iPhone to the compter you usually sync with
and use iTunes on that computer to do the restore.
Similar Messages
-
i lost my i-phone 4s yesterday night around 7.15 p.m i am keep on trying to reach my number but still the mobile is switched off,please help me how to find it
The only way to locate any lost/stolen iPhone is through Find My Phone or a similar app. However, this requires that Find My Phone be setup/activated, on your phone, before it was lost/stolen. You would then login at iCloud.com & try to locate it. This requires the phone be turned on & have an Internet connection. There is no other way to locate a lost/stolen iPhone. Apple can't/won't help you, nor will your carrier. Report the loss to the Police, your carrier & Insurance company. Change all of your passwords.
-
i disconnected my iphone 4 while it was updating and now its frozen, the screen is showing a apple logo and a loading bar which has been for 9hrs now. please help
It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
If that still won't work, post back with detailed information as to what exactly does happen as you go through the process. -
just updated itunes now menu bar has dissapeared no black and white box at top left and ctr b does not bring anything up. i need file view etc please help driving me crazy
Is the iTunes window in FullScreen mode?
If so, press esc key. -
i dowloaded an app cant rember name but i was ment to be a jailbreak thing (typed in on sarfari jailbreak me) but it was not what i hopped for so i tryed deleting it (and an game boy app off this app) but no X came up on the corner so i tryed resating it but its now frozen and thers the apple logo and a loading bar under it ?
PLEZ HELP ME SOME ONETry forcing your iPod into Recovery Mode...
Follow the Steps in this Article...
Recovery Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808 -
in the middle of my last update it stopped updating in the because of an unknown source, and now my screen on my iphone is frozen with the apple logo and a loading bar. Help??
Unknown "source"? Do you mean unknown "error" followed by a number?
http://support.apple.com/kb/TS3221
Follow the instructions in the article. When you connect your phone again, you may have to press both the home and sleep/wake buttons until the Apple logo reappears, then continue pressing the home button until iTunes detects the phone in recovery mode. -
I was trying to do an update on my Ipad2 and it looked like it was getting ready to load, but then I received an error message. Now my ipad is not working at all. The only thing that appears on the screen is the apple logo and a loading bar. I tried to turn it off, but it just wont do anything. Help!
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
I disconnected my iPad unconsciously while it was updating ios 7.0.4 and it just stuck on that screen showing apple logo and a loading bar that just won't move on what to do now ????
It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
If that still won't work, post back with detailed information as to what exactly does happen as you go through the process. -
Hi my serial number on bottom of my mac is W8******66E when l try to turn the computer on it is just going to grey screen with apple logo and spinning wheel i have tried starting in safe mode and a few other suggested solutions and they have not worked?
<Edited by Host>What other solutions have you tried?
This may help you:
https://discussions.apple.com/docs/DOC-3353
Ciao. -
Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga
If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.
-
When turning on my mac book pro it displays a screen with apple logo and begins loading a loading bar, after this continues to show loading circle however has been like this all day still no different. Tried turning it on and off however still same!
... then run Disk Utility, Repair Disk.
Also:
Resolve startup issues and perform disk maintenance with Disk ...
Mac troubleshooting FAQ: start-up woes
How To Fix Common Mac Startup Problems
Mac Stalls on Gray Screen at Startup - Troubleshooting Mac Startup ... -
My Mac book won't turn on. All I get is the apple logo and a loading icon and bar, then it just shuts down. What do I do?
What OS are your running?
Mavericks 10.9.4 boot into recovery and run the DiskUtility >Repair Disk
Recovery http://support.apple.com/kb/HT4718 -
Did an update on my phone and now I have the itunes symbol and usb symbol on my screen and my phone will not show anything else, what do i do?
http://support.apple.com/kb/ht1808
-
I recently "Erased all content and settings" on my iTouch and during the reset, it ran out of battery and it has been the apple logo and a loading symbol on the screen for 2 and a half days now. What do I do?
I did drop it from about 4 and a half foot during the reset so I don't know if that has broken it.See if placing the iPod in Recovery mode will allo iTunes to see the iPod so you can restore it.
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My touch is frozen on a black screen with the apple logo and a load bar, nothing works, tried resetting and everything, any suggestions?
In that case....if you have Apple Care, give support a call - otherwise, walk it into the nearest Apple Store.
Good luck.
Maybe you are looking for
-
How to get the values of all elements and sub elements from following xml
how to get the values of all elements and sub elements from following xml... <?xml version="1.0" encoding="UTF-8" ?> <List_AML_Finacle xmlns="http://3i-infotech.com/Cust_AML_Finacle.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schem
-
Folks - I've been playing around a bit with the driver sdk (cooooooool stuff). How exactly is one meant to use the nextResults() method, anyway? From what I can tell it indicates some sort of ability to retrieve multiple data providers -- is that tr
-
SRM - Purchase order approval date in BC Extractor
Hello all, is there any way to get the Approval date (date on which the processing status of the PO) in BI. So far I can see, just the processing status is available in Datasource 0SRM_TD_PO, but how can I provide the belonging date within a BI query
-
Newby question.. I have a formula field labeled hours and consist of {CSC_SES3_WOI_WII_Work_Order_Join.csc_dec_estimated_hours} * DistinctCount ({CSC_SES3_WOI_WII_Work_Order_Join.csc_dec_estimated_hours}, {CSC_SES3_WOI_WII_Work_Order_Join.Summary})
-
Simple web service call crashes Acrobat
I have Acrobat 7.09. When I call web service like,<br /><br />var serviceURL="http://localhost/asynchws/ValidateAddress.asmx?WSDL";<br />var service = SOAP.connect(serviceURL);<br />var result = service.HelloWorld("Test string");<br /><br />from an x