HT4623 i am getting error 1604 while updating iphone 4
I am getting error 1604 while updating my iphone 4 to ios 6.01. how to update the phone
look here also.
http://support.apple.com/kb/TS3694
Similar Messages
-
Getting error 3194 while updating iphone 4 to iOS 5.1
Any idea how to fix this? BTW the iphone is currently running ios 5.0.1
thank you.Are you on the latest version of iTunes ?
See if this page helps : http://support.apple.com/kb/TS3694#error3194 -
I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!
Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?
-
Getting error message while updating Job attributes using PP03 for IT1641
Hey Guys,
We are getting error message while updating Job attributes using transaction PP03 for IT1641 (WC Attributes for JOB): 'Client has status not modifiable'.
Update to the infotype 1641 should not require open SAP system. Would anyone suggest any SAP note/solution?
Thanks...
Edited by: Karan Gheewala on Apr 3, 2008 9:06 PMSolved using Note 123383 - WC: Customizing worker's compensation tables
Thanks,.. -
Getting Error 0xC8000227 while updating pathces in winodws 2003 r2 enter prise editiion
While updating Windows Patches in windows 2003 r2 Enterprise Edition Getting Error 0xC8000227
Hi,
Based on my research, most of the error is caused by date time
inconsistence.
So please confirm you have correct date time settings.
Hope this helps. -
Error (-5000) while updating iPhone 4 to iOS 5??!
While my phone is backing up, before iTunes installs iOS 5, I get error (-5000) and it says if I continue, I will lose all the content on my phone. HELP!!! Thanks in advance!!!!!
Well, I truly do appreciate the answers posted on this issue... "but" for Mac users who don't use anti-virus software, this issue is still unresolved. This is the very first time that I've experienced a software update from Apple that didn't work. Doesn't Apple test their software before releasing it? I mean, this can make them look pretty bad in the public's eye. Hopefully there's a software update that will fix this soon. I've searched online for a resolution and have discovered that there are many people who are experiencing this same problem.
-
Hello Pals,
I am getting error 3014 when I try to update any of my iOS devices. It is consistent with all the updates ios 7.0, 7.0.3. I then ended up updating the device over air! So now I am here set for a goal to fix the iTunes to properly update my devices to 7.0.4. I have removed and did a clean install of iTunes that did not solve the problem. I then disabled all the security software including firewall, that had no effect on it. The security software that I have on my Windows 7 x64 Ultimate are
1. Microsoft Security Essentials
2. COMODO firewall
My hosts file is clean I have no entries that would re-direct.
FYI. None of my devices were EVER jailbroken!
Appreciate some help. This is really annoying.
Thank You,
NB
Here is the log file for the update attempt on my iPhone 5.
[05:37:47.0090] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
[05:37:47.0091] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 104525E0 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0091] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 06F9C1C8 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0092] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 10452358 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0093] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 104523E8 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0093] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 10452280 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0094] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 10452430 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0094] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 104522C8 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0095] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 06F9C378 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0095] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 06F9C408 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0096] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 06F9C3C0 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0096] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 06F9C450 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0097] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 06F9C4E0 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0097] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 06F9C498 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0098] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 10656438 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0098] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 10656480 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0099] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 106564C8 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0099] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 10656510 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0100] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 10656558 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
[05:37:47.0100] amai: AMAuthInstallBasebandApplyTssOverrides: failed to create CFDictionary from Options.plist
[05:37:47.0101] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 104E50A0 [72D98078]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
[05:37:47.0102] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
[05:37:47.0102] amai: AMAuthInstallDebugWriteObject: debug object written: E:\Temp\PerE795.tmp\amai\debug\tss-request.plist
[05:37:47.0322] amai: tss_submit_job: HttpEndRequest failed=12031
[05:37:47.0323] amai: AMAuthInstallRequestSendSync: failed tss submission: Internal error
[05:37:47.0324] amai: AMAuthInstallApCreatePersonalizedResponse: server request error: Internal error
[05:37:47.0325] amai: AMAuthInstallBundlePersonalizePartial: failed to create ap ticket
[05:37:47.0325] failed to personalize the restore bundle: Internal error
[05:37:47.0326] AMRAuthInstallDeletePersonalizedBundle
[05:37:47.0339] Restore completed, status:3014
[05:37:47.0339] Failure Description:
[05:37:47.0339] Depth:0 Error:Personalization failed
[05:37:47.0339] Depth:1 Error:Personalization failedOk I am answering my own question!! I solved this problem by removing all old data from "%APPDATA%\Apple Computers". Meaning I renamed all the contents and started to backup (all devices) from that point on. Some old data in the backup was corrupt and causing the 3014 error.
-
Error message while updating iphone 4
After each attempt (using Itunes for Windows) to download and update the iphone4 (to 4.3.2 from 4.2.1), I continue to get the following message (after what appears to be the full 666.2 Mb download), Itunes says: "Processing File" (err = 3259).
Then, in a seperate window:
There was a problem downloading the software for the Iphone "My Phone's Name". The network connection timed out. Make sure your network settings are correct and your network connection is active or, try again later.
Any idea why I receive the same message after more than a half dozen attempts?
THANKS!!!Well - I synced before - that was successful - but I am a bit scared to ignore this error and just to continue? You think I should ignore that?
-
Error 1603 while updating iPhone 4 to iOS 4.2
I tried to update a new iPhone 4 (shipped with iOS 4.1) to iOS 4.2 and reveived error 1603. After that i was told by iTunes to restore the iPhone, which i did.
After the restore iTunes shows this iPhone with iOS 4.2.1 now, what confuses me a bit.
Why iOS 4.2.1? Shouldn't it show iOS 4.1 here?
Is everything fine now or did something went wrong?A restore backs up your data, installs the latest version of iOS (currently 4.2.1) and then restores your data.
So that's why you've now got 4.2.1.
It's an unusual backup and restore method as most people tend to assume a restore will restore everything that was originally on the machine ... including the OS. -
Getting error message while defining Profit Center
Dear Expert,
Kindly suggest while adding profit center in profit center setup on profit center field earlier it allowed to save the profit center name in alpha numeric but recently we are getting error message while updating or adding on new profit center"Conversion failed when converting the nvarchar value "Profit Center Name" to data type int (CINF)".
If anybody had a solution or came across this kind of situation then please forward us your valuable information that would be really great to tackle and out come from this issue.
Thanks in Advance
Regards
KrishnaDear Krishna,
What is your B1 version and PL? Is it upgraded from an old one?
Thanks,
Gordon -
While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
Can anyone help me to resolve this issue.Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
First did a full back up of iphone using iTunes
Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
Disconnected USB cable from iphone
Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
Pressed and kept holding Home button while plugging cable back into phone
I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
Recovery Mode alert came up in iTunes.
Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
iphone did not appear in iTunes due to missing pairing file (that made me nervous)
iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
Eventually the iphone asked if I wanted to restore from a back-up (whew!)
A window opened in iTunes and I was able to select my previous back-up file for the restore
A full restore from back-up then occured
I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
When the restore was done I had to re-enter some passwords, but everything was there
iOS is now 5.0.1 (9A406). The whole process took about an hour. -
I am getting an 1015 error while updating Iphone 3G with latest iTunes pls help me to restore iPhone 3G
Try this and see if this helps http://support.apple.com/kb/TS3694#error1015
-
I'm getting error 5000 while trying to backup my phone before I can run an update
I'm getting error 5000 while trying to backup my phone so I can run an update. I'm getting a message that says my back up is corrupt. What does that mean and how can I fix it?
Hi
This is an easy Q: to set - but there is no simple and plain answer only a lot of more or less plausibly suggestions.
Error -50 = paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ?
If so it Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk 11Gb is on the limit to work when You select Export and might be it.
Video used - there are several video formats/codecs and iMovie can not use all of them, they evolve to fast.
• So try to find out by opening a raw video in QuickTime-player and then open Inspector (cmd+I) and read
Video Format/Codec: nnnnnnnn
What does it read ?
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
I convert all audio to .aiff - in iTunes I burn out as an Audio-CD .aiff (not .mp3) and use the files on this in my movie projects.
Some times it's needed to trash the "com.apple.iMovie.plist" file in You USER-Library/Preferences (not Library on Root level (when opening Macintosh HD) - but the one in Your home folder.
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Yours Bengt W -
HT4623 error 1015 while updating my iphone 3gs?
error 1015 while updating my iphone 3gs?
Activation issues are typically the result of a device that has been hacked or jailbroken.
If that is the case, no support can be provided here. -
HT4623 error 502 while updating software
error 502 while updating software
Hi EU@,
Thanks for using Apple Support Communities. If you're not able to update your software due to an error, I recommend this article:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Cheers,
- Ari
Maybe you are looking for
-
Confirm / Fulfill Open Qty pulling in partial quantity in sales order
Hello all, The inventory for item AA is 83.5 case for batch 123A. In the sales order i create, for item AA with Order Qty of 83 cases, it pull in from batch 123A, confirming 83 cases. Next line item AA, i need another 1 case. It goes to anoth
-
I have the iPhone 5 and iPad 3. I will travel to Europe and would like to know if I need a current covertidor 220-110 for my equipments. I have an adapter, but that did not change the flow and do not want to risk it. Thank you.
-
Can I partially change appearance on a file name?
I´m working with a big company that has quite a few articles that I´m making individual originals for. Since the customer always refers to the products by name, I need to start the file names with the description. At the end of the file name I add th
-
I have two printers of the same model registed in eprintcenter and can't differentiate between them. I've tried change varios names in each printer's settings but they still show up in eprintcenter with the model name. What can I do to change the nam
-
"No service" sign, celluar service with iOS 8.0.2 on iPhone 6
I have a problem with my new iPhone 6 with iOS 8.0.2 : 1.immediately after I end a call , every time, in 10 seconds appears the sign "No service" for about 10-12 seconds and then the signal reappears in full power again. It happens every time I end a