HT4623 i am having a problem with my iphone 4s. it is not displaying its volume bar in music or anywhere when not connected to earphones. kindly help me with its volume settings.
i am having a problem with my iphone 4s. it is not displaying its volume bar in music or anywhere when not connected to earphones. kindly help me with its volume settings.
Have you tried the restart/reset/restore troubleshooting path? That would be the best initial set of steps to take, particularly in a situation like this.
Similar Messages
-
Im having major problems syncing my iphone 4 to itunes, this problem started after upgrading to ios 5. I have upgraded my itunes, turned sync by wifi on and off but still nothing. Everytime I try to sync my iphone it just says sync cancelled. Please help.....
I'm having the same problem ! Each time the sync starts it suddenly stops and says finished syncing
-
HT1386 I'm having a problem syncing my Iphone 4 to iTunes.
I am having a problem syncing my Iphone 4 to Itunes, how can I fix this problem?
Is it just your home WiFi, or all WiFi? If it is just your home network start by rebooting your router. Turn it off or unplug its power for 15 seconds or so.
-
HI everybody i want to ask if you come me in help, i want to draw paths but when i use stroke options with pen or brush settings i loose quality when i zoom in , can someone help me with pen settings???
The work path is a vector object, and infinitely scalable, but when you stroke it, Photoshop lays pixels on a layer that follow the path. These pixels are raster based and can not be scaled without loosing quality. You do have options. If you want to make the raster layer bigger, transform the work path and stroke it again. Or work at a higher resolution in the first place.
Incidentally, you can't stroke a Path with the Pen, because it is a Vector based tool, and stroking is a raster based function. -
I bought new i phone model 4S from 3 comunication store wingate house 93-107 shaftbury Avenue,london.W1D 5DA.tel no. 020 7851 0817 on 30/sep/2012.my problems is, I can not activate my phone because i stay in malaysia ( when i connect using the sim card of malaysia DIGI line) it does not read malaysia sim card.Pls help me, how should i use this malaysian digi sim card and deactivate this 3 comunication sim card so i can use any type of sim card in any countries.
The phone details are as follows:
Serial no : 1151NVQLIKA.
My last 6 digit no in my sim 020287.
My 3 no 07450453838
My sim no 8944200009770020287You probably won't be able to use a Malaysian sim card in your phone. If you purchased the phone from 3, then it is probably carrier locked to 3 and it won't work with any other sim card.
Nobody here can do anything to help you. You need to contact 3, so you need to ring them or go back to the store where you purchased the phone. Not a lot you can do other than activate with the original 3 sim card in situ so that the phone will work.
You can try activating the phone with the 3 sim card and then try swapping them, but I suspect that the phone is carrier locked to 3 and you need to contact them for help. Noone else can do anything really except them. -
Hi , I have problem with my iphone 4s the wifi I can't put it on or off it's not worked with me , so what can I do plz answer me as soon you can
if it wont turn on or off the wifi ground connector could be loose. backup and restore the phone to new and see if it works then if not take to someone who fixes iphones
-
hello,
i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed
-
I recently bought an Ipod touch 2nd gen, (Ebay). It's in great shape and seemed to be wiped clean.
When I connect (via windows computer) to Itunes with usb cord the Ipod icon shows, but the only function you can do is eject. When its in the upper right hand corner and you click on it all you get is a done button, when it's in the side bar right click and your only option is eject, left click has no effect. If I go to "file">devices it's as if there are no devices connected.
I purchased a song with Itunes on the Ipod itself, and it transferred to my library on the computer automatically .
I have an Iphone 5 and a nano that are still functioning with Itunes thru computer so I'm thinking the issue is with the Ipod touch. I've reset it several times, rebooted it, with no change.
nothing on the internet has helped, I called tech support and got disconnected. Should I take it to a retail store? I just don't know where to go next, I'm of course willing to pay for tech or repair. looking for suggestions.Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I want to use an old 3 GS iPhone that is no longer in service as a phone now as just an iPod to play music. When I connect the phone to the computer with iTunes running, iTunes says it can't connect to the device because it didn't get a valid response from the device. How can I get the system to recognize the phone, and let me rename it as my iPod, instead of my phone?
As an aside, the current installed operating system on this old iPhone is 4.2.1, but that wasn't one of the selectable options in the operating system list dropdown below. Don't know if that makes any difference.Hi maddogdne,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Using an iPhone without a wireless service plan
http://support.apple.com/kb/ht3406
Cheers,
- Judy -
What can be wrong with my iPhone 4s. There is no sound from incoming calls and SMS even when I try to play music.
I already checked that it is not muted, volume is high and not in " vibrate mode."What can be wrong with my iPhone 4s. There is no sound from incoming calls and SMS even when I try to play music.
I already checked that it is not muted, volume is high and not in " vibrate mode." -
I would like to remove a short gray edge from two images. I need help in that I am not yet able to use PhotoShop. Could somebody kindly help me with this?
I doubt it Doc Maik, but I am certainly happy to learn The image is this one (and a similar one). They would be beautiful portraits if not for the "extra mouth". The grey edge that I would like to remove is the excess of (grey) mouth that is actually my horse's chin, but that in the pictures looks like a wider, looping mouth. Practically, looking at the picture, the "extra mouth" to the left. What I would love it to be able correct that to look like a normal mouth, which means that half of the protruding edge should be removed. I am not sure I was able to explain myself, but here is one of the two pictures. I thank you for you kindness in being available to advise me.
-
I get "We could not complete your iTunes Store request. An unknown error occurred (4002) Can any person help me with this on, please?
Turning off iTunes Match and Genius and then turning them back on appears to have worked for some people e.g.
https://discussions.apple.com/message/22059685#22059685
https://discussions.apple.com/message/18427550#18427550 -
ive had my iphone 5 for just over a year now.. its all of a sudden decided to shut down on me.. ive tried everything to get it switched back on again but nothings working, when i connect the charger it jst flashes with the apple icon.. anyone help?
Did you try a reset, hold the power button and home button until you see the apple then let go? Did you try to restore as new in iTunes on your computer?
-
i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.
I have just created this account to tell you that nothing would change if you restored your phone.
The first NO SIM nuisance happened just a week ago. Nothing had been done to the phone before that. I pressed HOME + POWER buttons to restart the phone and SIM card was successfully recognized as if nothing had happened. Then I had a lucky week, not reminded of this issue at all.
Today, however, the same problem keeps annoying me. I've used the same method to heal the phone but all I have done seems more like a placebo. So I tried the ultimate solution, restroing it in iTunes.
Ridicuously, the moment I finished basic setup on the newly restored phone, the same NO SIM CARD INSTALLED message poped up.
So IMO, it's not what you should do to erase and restore your phone.
Plus, I called my native carrier and they said no such problems have been submitted. And since my nano SIM card is quite new (three months old), I'm not going to replace it.
I googled this problem and found something on a Hong Kong webpage. The author of that thread points out that there is a flaw in the SIM card tray that prevents the phone from successfully recognizing SIM cards.
And I really hope Apple could probe into this issue and give official solutions other than restarting / restoring the phone like an idiot. -
My daughter locked her Ipod touch and it states Ipod is disabled connect to Itunes. When I connect to Itunes it states unlock with passcode. Any suggestions on how to fix this
iPhone and iPod touch: Unable to update or restore
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
Maybe you are looking for
-
Time machine disk not found after installing Mountain Lion
Since doing the upgrade, ML cannot find my external FW backup disk. I have tried resetting the PRAM (Command+Option+P+R) but this has no effect. I am running on a iMac 2.4GHz intel core 2 duo with 4Gb of Ram. Everything else seems ok, although boot-u
-
FIM Reporting installation (where to put SQL Reporting Services?)
Hi, I'm installing FIM 2010 R2 SP1 with Reporting feature. It is going to be installation with separate SQL and separate servers for SCSM DW and SCSM MS. I have SQL where I prepared 3 instances (default one for FIM databases, one for SCSM SM database
-
I have write RMI program the problem it's that I don't now how to start it This is my Interface import java.rmi.*; import java.rmi.Remote; public interface DataInterface extends Remote { public String testRemote() throws RemoteException ; This is my
-
I have not been able to find this problem on any forum anywhere. After the 5.1.1 OS update my iPad quit charging or syncing. There is clearly a problem with the connector port. I thought it was eventually going to run out of battery and that would b
-
Invoice report with different currencies
Dear friends, I need a report for invoices. I want to choose currency from selection screen. And report will calculate invoice amount with this currency. Does SAP have a standard report for this? How can I see invoice list with different currency? Th