HT4623 I am unable to install the latest update to my iphone. It's not finding the Wifi
I am not sure if the wifi connection is set properly. I tried to down load the latest iphone update and its not allowing me to do so...
Help!
My phone crashed twice and twice I've lost my enitre contacts list!
Where were the contacts synced to, a supported application on the computer, or iCloud? Sync them back to the phone from there.
Similar Messages
-
HT4623 since the latest update on my iphone 5 i cannot get a wifi connection
HI can anyone help, since the latest software was downloaded on my iphone 5 the wifi does not seem to work properley, when it is supposed to search for the wifi networks it does nothing sometimes a small blue circle will appear but no connection, and also it does not show a list of connections like it should. i have tried all the usual things like resetting the phone also reset my modem but this has not fixed the problem, this is the second handset i have had from apple the otherone had aspeaker prob and they kindly replaced the handset, its just annoying can anyone help please
Hello there, Badboymbc.
The following Knowledge Base article provides some steps for troubleshooting mail on your iOS device:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I use Photoship CC and have the latest update. My Filter Menu does not show the Blur Gallery.
Can anyone tell me why I don't see the Blur Gallery listed on my Filter menu?
Why did you have to call Support? An Adobe Engineer who programs Photoshop gave you the answer a whole day ago.
Of course the Blur Gallery is available in version 14.2.1. It's just not called out in the same place in the menu structure as in the newer versions.
-Noel -
since installing the latest update on my iphone 3gs this afternoon whatsapp now says it cannot access my photos. I have gone to settings-location services- but whatsapp is not listed in the list below. Please help!!!!
Contact Whatsapp for support.
There is no logical expectation for Whatsapp to be listed under location services or for that to have any affect on what the app can access. -
Trying to down the latest update to my iphone 4s but my phone is now frozen with a picture of a USB cable visible and an arrow pointing to itunes. This remain whether my phone is connected to itunes or not. Any help please?
Hi d_diotte,
Thanks for using Apple Support Communities. If you're unable to update your iPhone and keep seeing the "Connect to iTunes" image, this article has some steps you can try:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Cheers,
- Ari -
I tried to install the latest update on my iPhone 4s and now it seems to be frozen with an apple icon and a loading bar on the screen. I've tried turning it off, plugging it in to the wall outlet, plugging it into my computer. Nothing works. Any ideas?
connect it with the computer and let it finish or restart the process it takes a very long time
-
I am trying to install the latest update for HP Printers, it will not completely install ,now my printers won't work. Help!
Hello Carolyn - Thank you for your quick response to my concerns, I had already gone to the HP support site and tried to get the latest HP drivers, the site said for Lion 10.7 there was NA version. So, I just used my time machine to replaced the OS from that time spot. I got my printers working again, so all right with the printer. But, the fact remains that I still keep getting the New Update HP Printer in the software update window. But, what happens if I try to download and install it is this: It starts the download, everything seems to come down fine, it starts write the files and then starts moving items into place, the blue bar fills to all most the end and slows down to a stop and never completes the installation. I have left my laptop on over night and it never finishes the operation. I can only force quit the software update. Which has knock out my printer drivers. Now, I just keep unchecking the box in the software updates for new HP printer software. Is anyone else having this problem or is it just my system? Sincerely: Professor G
-
Hello everybody, Im trying to update my ITunes on my MAC (laptop) to the newer version so I can then be able to update the latest updates for my Iphone-3G. I don’t require a complete reinstall just need to be able to update my itunes.
What I have tried so far is I had my MAC search for update’s and it said that I should update to (ITunes version 10 . 6 . 3 ) So I asked it to do the update but after 2hrs of waiting for it to download/update it then puts up a message saying the following- (In order to continue installation, please close the following application: ITunes).
When I tried to do this another message comes up that says- (The update ITunes can’t be installed. The following install step failed: run preupgrade script for Apple mobile device support. Contact the software manufacturer for assistance.)
I have also tried to run the update while having closed ITunes before I even start the update but the same problem happens after waiting about 2hrs.
Some one that had the same problem said this might be happening in the older operating systems. But that does not make sense because surely Apple want customers who own a MAC and i-phone to still buy from iTunes.
My MAC is about 4-5years old. I have a i-phone.3G,
Can anybody help me please and Thank you?Download iTunes using the tab at the top of this page. Then run the update with iTunes closed.
-
I installed the latest update to my iphone 4 and now all I have is a display of the white usb cord with arrow pointing to ITunes with a clue circle with the musical note in it displayed. I can't access my phone at all. I tried calling it and it says unavailable. I don't know how to restore it...it says it is in recovery mode but when I try to recover, it says no iphone found.
I have no idea how what to do to restore my phone. It's fully charged.
GRRRRPut the device in DFU mode (Google it) and restore.
-
I went to do the latest update on my iphone 4s, and it said to connect to itunes so I did and continued to click restore and then it updated my phone through itunes. Then after about 40 minutes of it updating it still has the connect to itunes screen on. It won't go away and I have tried restarting and turning off my phone various ways various times. I don't know what to do!
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download -
Tried to in stall the latest update.. now my ipad will not work at all!
Tried to install the latest update.. now my ipad will not work..
samanthafaith wrote:
I have the ipad 4th generation. I tried installing the latest version and the screen came up with the arrow and itunes sign. Im pretty sure I have the latest version of itunes. After I tried restoring it on my coumpter it now has an apple logo staying on the screen.
That would be the indication of Recovery Mode. You can try instructions from this support document. If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
If you attempt it a couple of times and it does not complete, then make an appointment at the Genius Bar of the nearest Apple Store, or Apple Service Provider to check for hardware problems. -
In the latest version of Pages (5.0) I cannot find the refresh button to update a chart copied from Numbers (also latest version 3.0). I saved my Numbers document before copying to Pages. Can anyone help?
I think you identified my mistake. I confused tables-charts-graphs. I was wanting a "table" of cells (numbers) to be added to the Pages document. Is there no way to do that and keep the tables linked between Numbers09 and Pages09?
An example would be a Numbers spreadsheet calculating a number (say, a product price) and that number (data) be linked to a product information text in Pages.
I just recently saw the Merge function in Pages, but have not yet learned how that works. I don't use Pages much at all but it would come in handy for creating to information sheets about products --- with the product pricing being updated from a Numbers spreadsheet.
If you have any hints on how that can be done or where I can find info on that I would appreciate it.
Thanks for catching my misunderstanding.
Bill -
My Ipod shuffle appears in itunes on mac but not on windows 7 even though we have the latest update of itunes. We have also tried the other solutions on the apple support site.
Hi reinkristine86!
I know you’ve said that you have tried other suggestions for troubleshooting this issue, so pardon me if you have already seen this article, but have you tried all of the troubleshooting steps listed in the article below?
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
Airplay is not working after the latest update, whats wrong? Sound will not go to Apple TV or my Surround receiver
Hi Tokha,
If you are having an issue with using AirPlay from your MacBook Air, I would suggest that you troubleshoot using the steps in this article -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring - Apple Support
Thanks for using Apple Support Communities.
Best,
Brett L -
I was in the middle of the latest update and my iPhone now says it needs to restored will I be able to back it up first. I have photos on it I can NOT lose
It should have backed up automatically at the start of the update process. And you should be saving photos from your phone to your computer regularly, just like you would with any digital camera. If you were not doing this you MAY lose the photos, but if your backup at the start of the update was successful you will not. Just DO NOT sync after the update, until you have restore the backup and verified that it is OK.
What error message did you get during the update? Before you restore do the following:
Reboot your computer
Connect to a USB port on the computer directly, not a hub
disable your antivirus and firewall
Launch iTunes
Finally, connect the phone and restore. -
Updating to the latest iOS on my iphone 5 did not resolve this issue, the only way I've found round it is to switch the mode off
Do Not Disturb mode stays on after scheduled time
Maybe you are looking for
-
Airport Express error (-15006) when trying to connect as a remote speaker?
I use an Airport Express (g) to port music to my stereo. Recently it stopped working and although the green light is on (ie connected) when I try and connect iTunes to it gives me the waiting bar and then error (-15006). I've tried doing a 'hard' res
-
OraOLEDB.Oracle: Provider not found: Oracle 10.1.0.2.0 Client installation
Hi All, I am working on a SSIS task in which i need to get data from Oracle database which is on remote server. But when created the SSIS package and tried to create the connection from the connection manager using OLE DB connection, I am not able to
-
Exporting from JSP into PowerPoint or an Image file
I am having a JSP file, the data from which need to be exported into a PowerPoint presentation. Can you suggest me some code examples of exporting the data from JSP to PowerPoint or rather to an image (.gif or .jpg), this image file can then be inser
-
Uploading songs from my ipod to my new itunes
I had an itunes account set up with all of my songs on my laptop...which crashed. I have downloaded itunes to my new computer, but wanted to see if there was any way i could get my songs onto my new itunes?? I did not get the songs from itunes.
-
Since my "upgrade" I no longer have "save as" in Numbers
I can't save a verson of a Numbers spreadsheet. I only get the "save a version" option and it saves the file I'm working on over the top, apparently of whatever is already there. I suppose you could save then go into the saved files and change the n