HT4623 i amy unable to update my os

i have updated my os 7.1.1 but it is not get complited due to network problem

Hey sumedhkhandare,
Thanks for the question. If you are having issues updating your device, see the following resource:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M.

Similar Messages

  • HT4623 I am unable to update my Iphone. Mine does not give me the option of software updates, what do I do in that case?

    I am unable to update my Iphone, everyone tells me that my phone should give me the option of Software Update and mine doesn't. What do I do in that case?

    That option is ONLY available on iphone currently runnning ios 5 or later.
    Read the article that you linked.  it tell you how to update from itunes.  Open itunes, connect iphone

  • HT4623 I'm unable to update any apps. How do I fix it?

    I'm unable to update any apps in the App Store.  It asks my password and acts like it going to update, showing circle then goes back to update square.  It has been like this for months.  I have the newest software for iPhone 5.  It is like this on all my devices. Can someone please help me?

    reset all settings
    settings-general-reset-reset all settings
    now reconnect to wifi
    settings- wifi- click network name- enter password - join
    if issue persists back up and restore as new via iTunes
    Peace, Clyde

  • HT4623 I am unable to update my ipad to is07 and later, it keeps failing on on download right at the end.

    Hi I am currently on operating system is06.1.3 and trying to update to is07.0.2 (or whatever is the latest), each time I try (after backing up to cloud) it gets almost to the end of the load and I get an error message, download failed. Help please.

    Hi Colly07!
    I have an article here for you that can help you troubleshoot this issue a little further:
    iOS: Troubleshooting update and restore issues
    http://support.apple.com/kb/TS1275
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • HT4623 We are unable to updates our apps on Ipad , tried to log out of ID as well

    We are not able to update Apps on our ipad though tried logging out and in
    Does any one knows the Remedy?

    There are many posts about this same issue. Apparently there's a problem with the Apple app site. You'll just have to wait and try again later.
     Cheers, Tom

  • HT4623 i am unable to update my iphone 4 to 6.0.1 : its current version is 4.3.2  please help

    when ever i upadate its with itunes it shows an error  " request time out"
    please help .

    Disable the antivirus software on your pc during the update.

  • HT4623 Unable to update

    Hi,
    I have updated my phone no problem, however when attempting to update my iPad I get this message ' Unable to update as you are no longer connected to the Internet' ...but the iPad is connected, and it doesn't drop connection when verifying either so I am totally confused as it does this every time over the last couple of days!
    Any thoughts much appreciated!
    Louise

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    If you are updating via wifi, place your iPad as close to your router as possible.
    Try this -  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
     Cheers, Tom

  • HT4623 Unable to update applications installed.Error message "unable to connet iTunes" appears after installation icon hanging

    Since last two weeks I am unable to update my applications installed in iPad with iOS 6. Also no new app is getting installed. Installation icon appears but after some time error message "unable to connect iTunes " appears.Can some one guide me to solve this problem please?

    I've had similar problems. Whenever I try and update apps on the iPhone, the app would apparently download ok, but then not install. This didn't happen with new apps - only ones I was updating.
    I got around the issue by downloading the update in iTunes on my Mac, then deleting the app from the phone, then syncing. The problem with this method is that certain apps had saved settings which are lost when following this method.
    However... I seem to have fixed the issue after 2 months of trying.
    I followed the advice of this page:
    http://www.iphoneatlas.com/2008/09/10/itunes-8-workaround-for-5002-unknown-error -when-trying-to-update-apps/
    Then I repaired disk permissions and finally I completely erased and restored my iPhone BEFORE I synced it after the moving of the Mobile Applications folder.
    It's all working perfectly now and made my life much easier (especially with Aurora Feint updates), so I hope that this method works for some others.
    Good luck.
    Dom

  • HT4623 Since my recent update, i am unable to update any apps and access my itunes account??

    I have just recently updated my i-phone 4 to the latest ios update, since then i am unable to update any apps i have on my phone and unable to download anything from itunes???? any help would be appriciated.

    No, since last Thursday, unable to access i-tunes store at this time.
    I loaded up my laptop, went on the i tunes store, error message came up think it was an -30???
    I have logged out from iTunes on my phone, turned off , then turned back on, but still no joy.

  • HT4623 unable to update to 6.1.1; keeps saying not connected to internet when in fact i am

    unable to update to 6.1.1; keeps saying not connected to internet when in fact i am

    This is what worked for me: Double tap your home button to bring up the programs running in the back ground, press and hold so they show the red close option and close all programs.  After that shut your iphone down and power back on.  Immediately go to General>Software Update and it should work.  Good Luck

  • HT4623 iOS6 runs for while aprox 1/2 hour then outputs an error MSG unable to update

    iOS6 runs for while aprox 1/2 hour then outputs an error MSG unable to update

    @ i3rend4nv05
    I’ve encountered a link that might help you to unzip the file. Check this out. 

  • HT4623 My iPad 2 unable to update to iOS 8. Message reflected that iOS 7.1.2 is the latest.

    My iPad 2 unable to update to iOS 8. Message reflected that iOS 7.1.2 is the latest.  Need help. Thanks

    connect ipad to computer, launch itunes and update from there.

  • HT4623 Every time I try to update, I get a message saying unable to update- an error occurred while checking for a software update

    Every time I try to update, I get a message saying unable to update- an error occurred while checking for a software update

    im having a similiar problem but my iphone 4s is stuck in the recovery mode.. like every time i restore the phone to factory setting it redownloads the firmware but nothing changes. any ideas?

  • HT4623 I am unable to see software update option in setting- general iPhone 3gs

    I am unable to update my iPhone 3gs , there is no option of software update in setting->general.

    You need to update it from iTunes on a computer to get that option. As the article itself states, that's available in iOS 5 and later, but the device is running iOS 3.
    (73644)

  • HT4623 when i go to settings general    i have not found any update option .... in iphone 3gs.. what should i do??? i m unable to update through itunes,

    when i go to settings>general>   i have not found any update option .... in iphone 3gs.. what should i do??? i m unable to update through itunes,

    Since there is no "Software Update", you are not yet up to iOS 5.  That is where that feature was introduced.
    So your only choice is to use iTunes to update your software.

Maybe you are looking for

  • Any option to restrict SE16 record level access based on company code?

    Hi All, I have a requirement to restrict record level access in SE16 based on company code. Our SAP system has two company codes. The requirement is that users of one company code should not be able to see records of other company code in SE16. Is it

  • TreeTable selectedRowKeys not working in Jdev 11.1.1.4

    Hi, We have a treetable which we create using bindings (underlying objects are POJOs and not BC) We used to add a row to the treetable and then select the first node. This code used to work "as is in Jdev 11.1.1.3" Now when we test the same code usin

  • Oracle 9i Database Configuration

    i am preparing for the OCA. however, after installing oracle 9i on a win2k server machine, i get error messages like "database is not an internal command, etc..." from the command prompt. also from the BIN prompt. could someone give the correct steps

  • 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058]

    What can be the meaning of this error code, and how can I resolve it? 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46036] Internal Assertion: Condition len <= desc->objectLength_, file ..\Oci8\Src\SQXD

  • RAR Web service violation limit setting does not seem to work

    In RAR under config - preformance tuning one can configure the limit for violations of the webservice between RAR and CUP. If I set this to 20000, 100000 or even 1.5 miillion I still get the message: Risk analysis failed: EXCEPTION_FROM_THE_SERVICEVi