HT4623 I can't activate Location Services after installing ios& on Iphone 5.... any ideas?

I can't activate Location Services after installing ios& on Iphone 5.... any ideas?

I had the same issue with one of the three iPhones I updated on Wednesday.  There are many processes that are working for people including:
- Resetting the device several times
- Toggling the "Dont' Allow Changes" setting under "Restrictions --> Location Services"
- Disabling Restrictions altogether.
- Restoring from backup
I was able to restore location services by selecting "Reset" and choosing "Erase All Content and Settings" to set the phone up as new.  When the phone resets and goes through the setup process, I was given the option to turn on location services.  I then restored from backup and was good to go.
Some people have been able to resolve the issue by resetting but only using "Reset All Settings" without having to erase all content, but that did not work for me.  It took a while to get everything back to normal, but it is good to know that there was a somewhat simple solution.

Similar Messages

  • I can't activate location services

    After i upgraded my 3gs to ios 5, i can't activate location services. Can anyone help?

    I had the same issue with one of the three iPhones I updated on Wednesday.  There are many processes that are working for people including:
    - Resetting the device several times
    - Toggling the "Dont' Allow Changes" setting under "Restrictions --> Location Services"
    - Disabling Restrictions altogether.
    - Restoring from backup
    I was able to restore location services by selecting "Reset" and choosing "Erase All Content and Settings" to set the phone up as new.  When the phone resets and goes through the setup process, I was given the option to turn on location services.  I then restored from backup and was good to go.
    Some people have been able to resolve the issue by resetting but only using "Reset All Settings" without having to erase all content, but that did not work for me.  It took a while to get everything back to normal, but it is good to know that there was a somewhat simple solution.

  • Macbook can't activate the camera after install the message beta.

    Macbook can't activate the camera after install the message beta. I'd tried to uninstall the message beta, macbook still can't activate the rear camera in iChat. But the camera still can work in Skype or face time. Why?

    Did you use the bad computer to post this message?
    Where did you get the Flash program from?
    Are all programs giving you problems, or only some? What ones?
    '''[http://support.microsoft.com/fixit/ Microsoft Fix it Solution Center: troubleshooting software issues]'''
    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
    * [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems? Please report back to us!

  • Can't activate iPad. Restoration stops during firmware update. Any ideas?

    Can't activate iPad. Restoration stops during firmware update. Any ideas?

    Oh yeah i checked the firewall issue, and itunes is enabled.

  • After installing ios i'm can't connecting wi-fi, after installing ios i'm can't connecting wi-fi

    after installing ios i'm can't connecting wi-fi, after installing ios i'm can't connecting wi-fi

    Could you please be clearer, Could you please be clearer, could you please be clearer?
    You cannot connect at a wi-fi hotspot, or on a secure network?  Do you show any signal strength?  Do you show any available networks?

  • Can't activate location service

    iPod touch 4G 64GB, location service was active by default.
    A few days ago i deactivated location service and now i'm unable to activate it again. I have Wifi access, can browse and use maps. Although i've done the reset even maps didn't ask for activation of location service. The whole location service string is greyed out and can't be activated ?
    Any idea ?
    I know for sure it was active before and worked well.

    Ok, locations service was a victim of restrictions.
    Reset restrictions and been able to activate location services.

  • Can not sync with computer after installing IOS 8 on iPhone 5s

    I cannot sync with my computer after installing IOS 8 on iPhone 5s. In iTunes I get a dialogue box that says that the computer is not authorized (it is) I deauthorize and then authorize and it comes up again that the compeer cannot synch because it is not authorized. ???

    If it's not an authorized Apple charging cord, it may no longer work.  When I updated the iOS on my iPhone 5, it did the same thing; iOS 8 is just better at recognizing non-Apple cords.  There are a couple that are still recognized, but most no longer work.  I'd already seen it happen when I upgraded to an iPad Air -- it will definitely only accept authorized Apple cables -- so I knew what was happening.

  • TS4006 Can you activate location services on a device that has it turned off?

    I can't locate my ipad using the "find my iphone" app because the "location services" is turned off on my device.  Am I able to remotely turn on "location services" via the cloud or through the app itself?

    Unfortunately you cannot enable it remotely.  It has to be done on the device itself.

  • No "Location Services" after applying iOS 4

    Hi,
    after updating my iPhone 3GS to iOS 4 I can't turn on Location Services anymore.
    Am I the only one with this issue? Are there any solutions?
    TJ
    Ah, I found the reason - Location Services has been turned off in the Restriction Options. Weird ...

    I had the same issue with one of the three iPhones I updated on Wednesday.  There are many processes that are working for people including:
    - Resetting the device several times
    - Toggling the "Dont' Allow Changes" setting under "Restrictions --> Location Services"
    - Disabling Restrictions altogether.
    - Restoring from backup
    I was able to restore location services by selecting "Reset" and choosing "Erase All Content and Settings" to set the phone up as new.  When the phone resets and goes through the setup process, I was given the option to turn on location services.  I then restored from backup and was good to go.
    Some people have been able to resolve the issue by resetting but only using "Reset All Settings" without having to erase all content, but that did not work for me.  It took a while to get everything back to normal, but it is good to know that there was a somewhat simple solution.

  • Can't  start oracle8i service after installing successfully

    Hello
    i have already install oracle8.1.5 on solaris intel 7
    after installing, i want to start oracle service,
    using oracle accout, i log in , i go to $ORACLE_HOME/bin and execute 'dbstart'
    it is said 'cat can't open /etc/oratab'
    my ipc parametr is:
    set shmsys:shminfo_shmmax=4294967295
    set shmsys:shminfo_shmmin=1
    set shmsys:shminfo_shmmni=100
    set shmsys:shminfo_shmseg=10
    set semsys:seminfo_semmni=100
    set semsys:seminfo_semmsl=200
    set semsys:seminfo_semmns=420
    set semsys:seminfo_semopm=100
    set semsys:seminfo_semvmx=32767
    .profile is
    ORACLE_BASE=/u01/app/oracle
    ORACLE_HOME=/u01/app/oracle/product/8.1.5
    ORACLE_SID=o815
    PATH=$ORACLE_HOME/bin:/bin:/usr/bin
    can anyone help me?
    thanks a lot
    liu fang

    Hi,
    check the file oratab under /etc and the permission on that.if oratab is not under etc make a search for oratab and copy that to under /etc.
    try ps -ef |grep oracle
    see what happened.
    Yogi
    [email protected]

  • Can't start OLAPServer service after installing patches #9.0.1.3

    I had a running OLAPServer service before I installed the 9i latest patches (#9.0.1.3) yesterday.
    I have tried to use either Windows Service Manager or OLAP Services Instances Manager to start that service.
    When I tried to use OLAP OSIM, I got error message like this :
    XPINSMGR - 10565 Cannot access olap service from this database. Cause : an attempt was made to access OLAP services on a database on which it is not installed (?). Action: Install OLAP Service in the database...
    I have tried to create a new database and set all the OLAP configuration, but it is still not working..
    Is there someone can help me to figure out what happened ?
    thanks, Sjarif

    Thank's for your suggestion. But my problem occured after I installed the 9.0.1.3.1 patch on my 9i database server (in run on XP Pro machine). I have checked OLAPDBA,OLAPSYS,and OLAPSVR security status, they are NOT LOCKED and NOT EXPIRED.
    I have checked the content of OLAPServicesAgent.log file and I find ORA-03113 error.
    This is the content of OLAPServicesAgent.log file:
    [08-Apr-2002, 12:47:28PM] Finished waiting for init thread to finish; wait result: 0
    [08-Apr-2002, 12:47:28PM] Waiting for serviceDoneEvent to be triggered.
    [08-Apr-2002, 12:47:28PM] Filtering output using VERBOSE DEBUG (level 3 of 3) mode.
    [08-Apr-2002, 12:47:28PM]
    [08-Apr-2002, 12:47:28PM] Retrieving privilege information from registry and RDBMS.
    [08-Apr-2002, 12:47:28PM] New RDBMSInstance() allocated.
    [08-Apr-2002, 12:47:28PM] ztcsr failed with error code -1013
    [08-Apr-2002, 12:47:28PM]
    [08-Apr-2002, 12:47:37PM] GetRDBMSConnection(): setConnection() failed.
    [08-Apr-2002, 12:47:37PM] Was trying to connect to tns listener, OLAPDATA, with user id, olapsvr
    [08-Apr-2002, 12:47:37PM] Error message was: ORA-03113: end-of-file on communication channel
    [08-Apr-2002, 12:47:37PM]
    [08-Apr-2002, 12:47:37PM] Error code was: 4294967295, Function was: TxsRdbOCIConnection::connect
    [08-Apr-2002, 12:47:37PM] RDBMSInstance() destructor called.
    [08-Apr-2002, 12:47:37PM] New RDBMSInstance() allocated.
    [08-Apr-2002, 12:47:37PM] ztcsr failed with error code -1013
    [08-Apr-2002, 12:47:37PM]
    [08-Apr-2002, 12:47:37PM] GetRDBMSConnection(): setConnection() failed.
    [08-Apr-2002, 12:47:37PM] Was trying to connect to tns listener, OLAPDATA, with user id, olapsvr
    [08-Apr-2002, 12:47:37PM] Error message was: ORA-03113: end-of-file on communication channel
    [08-Apr-2002, 12:47:37PM]
    [08-Apr-2002, 12:47:37PM] Error code was: 4294967295, Function was: TxsRdbOCIConnection::connect
    [08-Apr-2002, 12:47:37PM] RDBMSInstance() destructor called.
    [08-Apr-2002, 12:47:37PM] New RDBMSInstance() allocated.
    [08-Apr-2002, 12:47:37PM] ztcsr failed with error code -1013
    [08-Apr-2002, 12:47:37PM]
    [08-Apr-2002, 12:47:38PM] GetRDBMSConnection(): setConnection() failed.
    [08-Apr-2002, 12:47:38PM] Was trying to connect to tns listener, OLAPDATA, with user id, olapsvr
    [08-Apr-2002, 12:47:38PM] Error message was: ORA-03113: end-of-file on communication channel
    [08-Apr-2002, 12:47:38PM]
    [08-Apr-2002, 12:47:38PM] Error code was: 4294967295, Function was: TxsRdbOCIConnection::connect
    [08-Apr-2002, 12:47:38PM] RDBMSInstance() destructor called.
    [08-Apr-2002, 12:47:38PM] New RDBMSInstance() allocated.
    [08-Apr-2002, 12:47:38PM] ztcsr failed with error code -1013
    [08-Apr-2002, 12:47:38PM]
    [08-Apr-2002, 12:47:38PM] GetRDBMSConnection(): setConnection() failed.
    [08-Apr-2002, 12:47:38PM] Was trying to connect to tns listener, OLAPDATA, with user id, olapsvr
    [08-Apr-2002, 12:47:38PM] Error message was: ORA-03113: end-of-file on communication channel
    [08-Apr-2002, 12:47:38PM]
    [08-Apr-2002, 12:47:38PM] Error code was: 4294967295, Function was: TxsRdbOCIConnection::connect
    [08-Apr-2002, 12:47:38PM] RDBMSInstance() destructor called.
    [08-Apr-2002, 12:47:38PM] Done retrieving privilege information.
    [08-Apr-2002, 12:47:38PM] Starting IOR listener on port: 7051
    [08-Apr-2002, 12:47:38PM] ServiceManager Constructor called.
    [08-Apr-2002, 12:47:38PM] ScmEnumServicesStatus()***ret = 234***m_hServiceManager = 1417944***bufsize = 10180***numServices = 0
    [08-Apr-2002, 12:47:38PM] ScmEnumServicesStatus()***ret = 0***m_hServiceManager = 1417944***bufsize = 0***numServices = 98
    [08-Apr-2002, 12:47:39PM] An access provider was found reading the Security/AuthenticationProviderPath registry key (C:\OraHome1\bin\xsapdbms.dll) for the service name, OLAPServer
    [08-Apr-2002, 12:47:39PM] New RDBMSInstance() allocated.
    [08-Apr-2002, 12:47:39PM] ztcsr failed with error code -1013
    [08-Apr-2002, 12:47:39PM]
    [08-Apr-2002, 12:47:39PM] GetRDBMSConnection(): setConnection() failed.
    [08-Apr-2002, 12:47:39PM] Was trying to connect to tns listener, OLAPDATA, with user id, olapsvr
    [08-Apr-2002, 12:47:39PM] Error message was: ORA-03113: end-of-file on communication channel
    [08-Apr-2002, 12:47:39PM]
    [08-Apr-2002, 12:47:39PM] Error code was: 4294967295, Function was: TxsRdbOCIConnection::connect
    [08-Apr-2002, 12:47:39PM] RDBMSInstance() destructor called.
    [08-Apr-2002, 12:47:39PM] ExecuteRDBMSCommand() failed, command = select * from ALL_OLAP_os_child_instances
    [08-Apr-2002, 12:47:39PM] Unable to add Olap child instance, OLAPServer, to the Oracle ALL_OLAP_os_child_instances table.
    [08-Apr-2002, 12:47:39PM] Check to see if the usernames and passwords within olap.key associated with
    [08-Apr-2002, 12:47:39PM] this instance are correct. If not, use the /CreateKeyval option of xsdaemon to reset the values, or use
    [08-Apr-2002, 12:47:39PM] the script provided for that purpose.
    [08-Apr-2002, 12:47:39PM] xsdaemon process is terminating abnormally.
    It seems to me there is a problem in OCI connection ...
    Thanks.
    Sjarif

  • I can't activate my imessage after I restored my iPhone 3gs

    So I forgot my password and after trying to back up my phone I gave up and just restored it from the beginning. I am so annoyed all I want to do is iMessage someone to tell them this had happened and everything's I put my passwords in for apple I'd it goes sorry cannot connect to server or something like that I heard the iMessage is down :( but how long and is there anyway to get lost pictures back I am very annoyed ???!!??!

    They are saying within the next 24 hours.
    Were you using Photo Stream? Were those pictures on your computer? If no to each they are probably gone.

  • Can't find portal service after installing the Sneakpreview

    I am using Windows Xp pro pack2 system in my laptop and Sneakpreview Full Java Edition-Trial version. I have installed Sneakpreview par1, part2 and part3 with no error message. Then I opened Developer Studio to create a portal application. The following thing I did is upload the applcation to portal system. This is the setting for my portal system.
         alias: myportal
         host: localhost
         port: 50000
         login:  I use my winxp login name on it
         description:  blah......
    However system gives me the error message:
        PAR upload failed. please make sure the server myportal(localhost:50000) is running. HTTPS protocol is not supported,please ensure this server is not using HTTPS.
    Could anyone tell me what should I start the service. Your help is much appreciated.

    Hi,
    1. Check out the settings in Windows --> Preferences --> SAP Enterprise Portal --> add the server.
    2. Also check the SAP J2EE Engine config. Check the entry for Message Server Port. typically it is 3601or 3903
    3. Goto Windows --> Open Perspective -- >J2EE Developement --> it will open a window in NWDS. Click on J2EE Engine tab, see if the servers are really running. All servers status should be in green color.
    Cheers!!!!
    Sukanta Rudra
    Note: Helpful answer, plz award points

  • Can't open my inbox after installing ios 6

    Since I upgraded to ios 6 on my iphone 4 I can't open my mail inbox. I have closed down the mail program and re-started it and I have deleted my mail account and re installed, but that did not help. What to do? Can I go back to ios 5?

    No, that only helps for one mail check. I can reach my mail via the folder All mails, but I don´t think that is an acceptable solution. (Question to Apple: Why offer updates that don´t make my iphone functiong better than before? Or, at least, as good as before the update?)

  • HELP ME T23 does not boot anymore after installing a Lenovo update. Any idea?

    Hi, I installed the updates and later I shut down the laptop as requested. Later that day I wanted to start it again but nothing happend other than the little round green light next to the switch button goes on. The monitor stays black. I removed the batterie and plug (the batterie is dead anyway) but that did not help. I believe my harddrive made noise lately, too. Is that the end?

    I was able to eject the dvd by pressing the usb mouse left button while booting. Then put it back in after a reboot
    After that selecting the alt-key, i selected the install dvd, and after a while (gray background and spinning weel) it took me again to the installation screen.
    Will tell you if it is working in a while...

Maybe you are looking for