HT4623 I can't update my 4s from 5.0.1 to 5.1.1 by itune or the phone, message show "iso 5.0.1 up to date "

Good day
I am trying to update my iPhone 4s from 5.0.1 to 5.1.1 and a message show that ios 5.0.1 up to date !!!!
On other hand I try by iTunes & iPhone but it’s the same message
Also I reset the all setting and the same message show!!
However it went well by my x iPhone 3gs & 4
Regards
Abdulaziz Ali
[email protected]

You can't because you are only able to update your phone to the latest iOS, so it will have to be iOS 6 or nothing.

Similar Messages

If I update my 3gs from ios 4.1 to 6.1.3 will it crash the phone?

if I update my 3gs from ios 4.1 to 6.1.3 will it crash the phone?

If you are running iOS 4.1 on a stock, unmodified 3gs, you should
have no problem. Do a backup of all your data, music, pictures, etc
before as protection.
If your iPhone has been jailbroken or hacked to work with a carrier
other than the one the iPhone was originally locked to, you may
have problems.

HT4623 Can I update my iPad from iOS 5.1 to 6?

Can I update my iPad from iOS 5.1 to 6? It says there are no updates available when I check but there are apps I want that require the newer iOS.

If yours is an iPad 1 then it can only update as far as iOS 5.1.1

My ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible

my ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift + restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

HT201210 i bought a iphone 3g from market yesterday and the phone is showing a usb an also itunes logo on the screen, the ive tryed restore and update, but once this has finished it gives me erra code (1015) can anybody help me plz

i bought a iphone 3g from market yesterday and the phone is showing a usb an also itunes logo on the screen, the ive tryed restore and update, but once this has finished it gives me erra code (1015) can anybody help me plz

Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
http://support.apple.com/kb/TS3694#error1015.

Can I update my iPhone from any PC w/o downloading and just logging in to iTunes account? Can't find that option. thanks for the help!!

Q: Can I update my iPhone from any PC w/o downloading, just logging in to my iTunes acct? Can't find that option. Thanks!!

You mean update your iPhone software? Yes, you can do that on any computer, but it REQUIRES an internet connection & yes the software needs to be downloaded unless already on the computer and the exact version for your model iPhone.

I can't update my MBP from 10.8.1 to 10.8.2

I recently bought a used MBP 13 (latest model) from Amazon. I can't seem to get the update to install from 10.8.1 to 10.8.2. I tried the manual download from the support pages and that won't work either. When I do that it states: OS X Update can't be installed on this disk. This volume does not meet the requirements for this update. Iphoto won't update because I need 10.8.2 for the update and going through software update just takes me to the app store and gives me the same error message. I saw some posts a few months back where mac mini owners had this same problem but I can't find any discussiuons concerning my model. Any help would be appreciated.

Then you need to contact Apple directly. Phone them. Or you could take it into an Apple Store and ask then to install the 10.8.2 update.

Oracle 11g database can we update patch directly from 11.2.0.3.0 to 11.2.0.4.0?

Hi,
I have installed Oracle 11g database.
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for 64-bit Windows: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
I want to update the patch.
Oracle 11g database can we update patch directly from 11.2.0.3.0 to 11.2.0.4.0?
Is any impact on the database?
Kindly suggest,
Regards,
Sachin

11.2.0.4 is nothing but a patchset of 11.2.0.3, in-place upgrade is allowed :
http://docs.oracle.com/cd/E11882_01/server.112/e23633/preup.htm#UPGRD12370
"You cannot install the new software into the same location for Oracle home as your current release, unless you are installing an Oracle Database 11g patchset release. For a patchset release, you can use the same Oracle Database 11g Oracle home."
And since it's a patchset, a direct upgrade is ok.
Lastly, yes, every upgrade has an impact (e.g. perf.), it has to be tested.
Nicolas.

Unique data record means you can't update a record from ECC with same key.

Unique data record means you can't update a record from ECC with same key fileds right?
Details: For example i have two requests Req1 and Req2 in DSO with unique data record setting checked. on day one Req1 has a filed quantity with value 10 in Active data table. On day two Req1 can not be overwitten from ECC with Req2 with the same key fields but different value 20 in the filed quantity because of the Unique data record settings. finally the delta load fails from ECC going to DSO because of this setting. is it right?
I think we can only use unique record setting going from DSO to cube right?
Please give me a simple scenario in which we can use this setting.
I already search the threads and will assign points only to valuable information.
Thanks in advance.
York

Hi Les,
Unique Data Records:
With the Unique Data Records indicator, you determine whether only unique data records are to be updated to the ODS object. This means that you cannot load a data record into the ODS object the key combination for which already exists in the system otherwise a termination occurs. Only use this setting when you are sure that only unique data records are to be loaded into the ODS object (for example, single documents). A typical application of this is in the loading of mass data. It improves the load performance.
Hope it Helps
Srini

Can't update daisy disk from Mac App Store

Can't update daisy disk from Mac App Store!! What can i do? AppStore wrote You must login in to @@@@mail, but I login to my account!

You must sign in to the App Store with the Apple ID you used to install the app. If you don't recognize the ID, see below.
You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
Important: The app you need to remove is not necessarily the one named in the App Store notice. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
Triple-click anywhere in the line of text below on this page to select it:
kMDItemAppStoreHasReceipt=1
Copy the selected text to the Clipboard (command-C).
In the Finder, press the key combination command-F to open a search window, or select
File ▹ Find
from the menu bar. In the search window, select
Search: This Mac
from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select Other...
A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
Log out and log back in. Test.

Can I update to yosemite from 10.6.8

Can I update to yosemite from 10.6.8, or do I need to order Lion or Mountain Lion first?
I thought I could just upgrade but when I select UPGRADE, I get messages like: "Safari can't open the specified address"

Well yes, however you do not give enough information. Technically all you need is 10.6.8, but there is more to the equation.
Easy to figure out if you look at this ref of requirements
https://www.apple.com/osx/how-to-upgrade/

HT4972 can i update my iPhone4 from 4.3.1 to the latest ios 6.0 or do i need to update my phone to ios5.0?

can i update my iPhone4 from 4.3.1 to the latest ios6.0 or do i need to update my phone to ios5.0 first?

When you update, iOS 6.0.1 will be installed. Follow the directions here:
http://support.apple.com/kb/HT4972

HT4623 how can i sync my music from my apple pc to my iPhone 4s

how can i sync my music from my apple pc to my iphone 4s

Syncing with iTunes
Syncing with iTunes copies information from your computer to iPhone, and vice versa. You can
sync by connecting iPhone to your computer, or you can set up iTunes to sync wirelessly with
Wi-Fi. You can set iTunes to sync music, photos, videos, podcasts, apps, and more. For information
about syncing iPhone with your computer, open iTunes, then choose iTunes Help from the
Help menu.
Set up wireless iTunes syncing: Connect iPhone to your computer. In iTunes on the computer,
select your iPhone (under Devices), click Summary, then turn on “Sync over Wi-Fi connection.”
When Wi-Fi syncing is turned on, iPhone syncs every day. iPhone must be connected to a power
source, iPhone and your computer must both be on the same wireless network, and iTunes must
be open on your computer. For more information, see iTunes Wi-Fi Sync on page 136.
Tips for syncing with iTunes
• If you use iCloud to store your contacts, calendars, bookmarks, and notes, don’t also sync them
to your device using iTunes.
• Purchases you make from the iTunes Store or the App Store on iPhone are synced back to your
iTunes library. You can also purchase or download content and apps from the iTunes Store on
your computer, and then sync them to iPhone.
• In the device’s Summary pane, you can set iTunes to automatically sync when your device is
attached to your computer. To temporarily override this setting, hold down Command and
Option (Mac) or Shift and Control (PC) until you see iPhone appear in the sidebar.
• In the device’s Summary pane, select “Encrypt iPhone backup” if you want to encrypt the
information stored on your computer when iTunes makes a backup. Encrypted backups are
indicated by a lock icon , and a separate password is required to restore the backup. If you
don’t select this option, other passwords (such as those for mail accounts) aren’t included in
the backup and will have to be reentered if you use the backup to restore the device.
• In the device’s Info pane, when you sync mail accounts, only the settings are transferred from
your computer to iPhone. Changes you make to an email account on iPhone don’t affect the
account on your computer.
• In the device’s Info pane, click Advanced to select options to let you replace the information on
iPhone with the information from your computer during the next sync.
• If you listen to part of a podcast or audiobook, the place you left off is included if you sync
the content with iTunes. If you started listening on iPhone, you can pick up where you left off
using iTunes on your computer—or vice versa.
• In the device’s Photo pane, you can sync photos and videos from a folder on your computer.

How to update Ipad 2 from IOS 4.3.5 to IOS 5. Itunes won't let me do it because it keeps showing error messages asking me to check if my network is active.

how to update Ipad 2 from IOS 4.3.5 to IOS 5? Itunes won't let me do it because it keeps showing error messages asking me to check if my network is active.

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

HT5858 I can't update apps on my iphone 5. theirs an old apple ID. That I don't have the pass word. I've created a new apple ID. but the old one keeps popping up. I have it on the Itunes on the phone but the old one keeps comming up and asking for a pass

I can't update apps on my iphone 5. theirs an old apple ID. That I don't have the pass word. I've created a new apple ID. but the old one keeps popping up. I have it on the Itunes on the phone but the old one keeps comming up and asking for a pass word.

Apps are permanently tied to the Apple ID used to purchase them. You will have to delete the apps from the phone and re-purchase them using your Apple ID.

HT4623 I can't update my 4s from 5.0.1 to 5.1.1 by itune or the phone, message show "iso 5.0.1 up to date "

Similar Messages

Maybe you are looking for