HT4623 I cannot select hyperlinks without enlarging screen since iOS 8 update

I cannot select hyperlinks without enlarging screen since iOS 8 update. Has anybody else had this problem?

Try reset iPad
Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
Note: Data will not be affected.

Similar Messages

  • Have only partial screen since IOS 8 update sharing with my favorites down the left side of screen. Any suggestions

    Have only partial screen since IOS 8 update, sharing with favorites down the left side of my screen. Any suggestions?

  • My 4s now has error messages and locks to apple screen since iOS 6.1.2

    My 4s now has error messages and locks to apple screen since iOS 6.1.2 update. Can't do anything with it. Its almost frozen, then every now and then it descides to work?

  • Since iOS 7 update apple tv screen on ipad stuck in portrait mode

    Since ios 7 update Apple TV screen on iipad stuck in portrait mode. How to unlock?

    Do you have orientation lock turned on on the iPad?  You would see a little lock with a clockwise arrow going around it near the battery symbol on your iPads screen.

  • Cannot access my I tunes account since the newest update for windows have uninstalled and reinstalled 3 time

    Cannot access my i tunes library since the newest update this morning. I have uninstalled and reinstalled i tunes 3x still getting the same error message

    Hey mystquester!
    I have an article for you that can help you troubleshoot this issue with your installation of iTunes:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Cannot select the newly created Screen variant in ENJOY transactions.

    Hello All,
    I have created a screen variant for a specific requirement from the client in transaction SHD0.
    However I am unable to select this new screen variant in all ENJOY transactions.
    When I try to select the screen variant in FB50-Post GL through>EDIT>Screen Variant, Select,Reset and Create Screen variants are greyyed out.
    I have checked the setting in SU3, as well as FB00 for the Parameters, it appears to be correct.
    Kindly help at the earliest!!
    Regards
    Shrutika

    Hi,
    Shrutika.
    Try this I hope this may help you.
    Go to FB50 at above left hand side will see Tree On option button. Click on that you will see Screen vairants for items option with drop down object. Simply click on that now select your desired screen variant by double clicking applied. 
    I hope this may help you to solve your issue. If you have any doubts feel free to ask.
    Regards,
    Pankaj A Bhalerao.

  • Photos saved to wallpaper are enlarged and don't fit the screen since the new update to iOS 7

    Since the new update, when I try to save a new picture to my wallpaper and background, the photo is enlarged and does not fit the screen anymore.  Please fix!!!!

    A good point, but you'd better send your feedback directly to apple - hre, in a User-to-User Forum, Apple will probably not see it. Use one of the feedback forms:   http://www.apple.com/feedback/iphoto_ios.html
    I prevent the zooming by editing and cropping the photo to exactly the size I want in the Photos.app. In "Edit" mode I view it in Fulls creen, take a screenshot, and then set the screenshot as wallpaper.

  • HT4623 I cannot activate my iphone after upgrading to ios 6.1.3

    Hi..
    Please help to to activate my iphone.. otherwise its cannot be used.
    I saw notification on software update on iphone 3gs... so i downloaded it and upgrade.
    After complete, i cannot activate my phone as message keep on appear as i tried,
    "YOUR IPHONE COULD NOT BE ACTIVATED BECAUSE THE ACTIVATION SERVER IS TEMPORARILY UNAVAILABLE. TRY CONNECTING YOUR IPHONE TO ITUNES TO ACTIVATE IT, OR TRY AGAIN IN A FEW MINUTES".
    I had tried using latest version of iTunes but still cannot activate... Message appear in iTunes, "
    We're sorry, we are unable to continue with your activation at this time.
    Please try again later, or contact customer care.

    Sounds like your iPhone was previously hacked/jailbroken. If true, try using google.

  • I cannot open images in my email since the Firefox update. Help!

    I cannot open images in my email or view the embedded photo in a new tab since the Firefox Update. "IE" will let me open them, but not Firefox... How can I fix this?

    Hi Pat..When I tried to run Fix It the computer pops up a screen that says this trouble shooter does not apply to this computer .The article refers to Internet Explorer 10 and Im running Internet Explorer 11. I did try to see it it would fix my problem but the registry entry does not exist on my computer (HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main\TabProcGrowth) I can get as far as HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer but I dont have the option to choose Main. I only have the option to choose New Window which does not open up when clicked. Internet Explorer also has no value. Is there anything else I should try?

  • My 2014 MacBook Pro stuck on grey screen since trying to update software over an hour ago

    My 2012 MacBook Pro has been stuck on the grey screen for more than hour since I tried updating the software.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • How do I restore apps to iPhone screen after IOS 7 update

    how do I restore previously purchased apps to iPhone screen after IOS 7.02 update?

    Hello Stanfromks,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store
    http://support.apple.com/kb/HT2519
    Tap App Store.
    Make sure you're signed in with the same Apple ID used for the original purchase.
    Tap Updates.
    Tap Purchased on the resulting screen.
    Locate the app in your Purchased tab.
    Tap the download icon.
    The app will begin downloading and you'll be taken back to your home screen.
    Best of luck,
    Mario

  • Bookmarks opens in a window 2/3's the size of my screen since the latest update. Now the first bookmark I scroll over covers the whole window instead of too the side and I can't close it without closing the bookmarks window

    I kept getting a reminder I had a Firefox update I needed to install. I did last night but never opened Firefox again till this morning. Now when I click on bookmarks for the drop down it opens a window almost 2/3's the size of my screen instead of the narrow window it has in the past. Now as soon as I move my mouse over or close to any bookmark it opens up that bookmark in the window and I can't access the bookmark I want. I have to close the whole window and then be very careful as I move my mouse to the correct bookmark. In the past with the narrow window it opened the bookmarks to the side and only after you clicked on them. I have tried to resize the window but can't find any option to do so. Also couldn't find an option that would let me change it so a bookmark had to be clicked on. If this can't be changed I will be removing Firefox. This is too inconvenient for me.

    Take it to your local Apple Store or AASP, it's covered by a 1 year hardware warranty. If you have AppleCare then give them a call but I'm pretty sure they will advise the same. If you have not purchased AppleCare yet please do, this will extend the warranty to 3 years however it MUST be purchased within the first  year of ownership. Let it go 366 days and you are out of luck. AppleCare will also include telephone support too.
    Good luck.

  • HT4623 I cannot access itunes on my iphone since updating to ios 7?

    I cannot access itunes on my iphone 5 since updating to ios 7?

    Hi rickwebby,
    If you are having audio issues with your iPhone after updating to iOS 6.1.3, you may want to update to the recently released iOS 6.1.4 and see if the issue persists:
    Apple Support: iOS 6.1.4 Software Update
    http://support.apple.com/kb/DL1652
    Cheers,
    - Brenden

  • Cannot text droid since iOS 7 update

    I updated my iPhone 4S to iOS 7.0 and now my contacts that are droid users are not receiving my texts.  I cannot receive texts from them as well. Please help.

    Settings > Messages > Send and Receive From
    Make sure your phone number is selected.

  • How do I get my apps back on my home screen after iOS 7 update?

    When I downloaded iOS 7 I could only access my apps from the search. I want the back on my home screen! Please help

    No I do not have multiple pages.  There are only two pages, and the second one only has two icons on it.  My apps are only in the store, and I want them on the home screen. 

Maybe you are looking for