HT4623 I couldn't find software update in general to update my ios 4.1 ipod touch to IOS 5. Where is located software update in ios 4.1 ipod touch
I couldn't find software update Setting-General to update my IOS 4.1 version Ipod touch to IOS 5 or last version. Where can I find? Could you help me please?
You must be running iOS 5 or later for WiFi updating. You must use iTunes. You must have an iPod Touch model that supports at least iOS 5. That means a 3G Touch. See Identifying iPod models.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages
Similar Messages
-
I have a question? I update my macbook pro but every time I do and I go back to where it says software update it says that if I want to update my pro I just did, and Im using Mac Os X snow leopard is it that I have to upgrade to lion?
It also says view updates, so select that option and see what it wants to update.
-
i got an error message saying that update couldn't update because disk was full and it said to empty recycle bin, anyone know where to locate this mysterious elusive recycle bin?
arghineedhelp wrote:
i got an error message saying that update couldn't update because disk was full and it said to empty recycle bin, anyone know where to locate this mysterious elusive recycle bin?
On your computer. -
HT4972 Why does my iPad not show software updates in general settings
Why would an iPad version 4.3.5 not show software updates in general settings
because it was not there before iOS5. iOS5 is the first that can incrementally update the iOS on the idevice directly. The older versions must be updated via iTunes.
-
HT4623 I go to Setting -- Gerneral but couldn't find softeware update? It only had About.
I go to Setting --> Gerneral but couldn't find software update.
How can I update my system?If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
My computer couldn't find my playbook anymore after software update!!!
After software updated to 1.0.7.3312, my computer couldn't find my playbook anymore.
First couple time it could find normally as like before, few times later it could not anymore!!! LOL.
I tried connect to the other PC either in my office and home several times, exactly same happen again.
Anybody got same problem that I have? Please advice me.
My computers have Window7, 32bit.Please review the knowledge base articles here:
Article ID: KB27424 Identifying and troubleshooting issues with the BlackBerry Desktop Software detecting a USB connected BlackBerry PlayBook
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I can't find software update on my general tab. ***?? It's an iPad...like the very first old school one. Remember those? Lol
See
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
HT4623 i can not find the botton SOFTWARE UPDATE on my Iphone 3G
i can not find the botton SOFTWARE UPDATE on my Iphone 3G,
I can t use whatsUp anymore because I need to update the systemIf you can upgrade you will have to do it through iTunes:
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 6.1.x
iPhone 4S iOS 6.1.x
iPhone 5 iOS 6.1.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 6.1.x
iPad 1 iOS 5.1.1
iPad 2 iOS 6.1.x
iPad 3 iOS 6.1.x
iPad 4 iOS 6.1.x
iPad Mini iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
HT4623 I. Can't find software update in the general setting . How else can I update my iPod touch.
Don't have update software under the general settings. How do I update my iPod touch iOS to 4.3 or higher?
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
How do I update the software for my ipad2 I can't find the option under general.
Annelies73 wrote:
I can't find the option under general.
Then you're not running iOS 5. Connect to computer, launch iTunes and update there. -
HT4623 I do not find software updates under general in setting
I want to load Skype in my iPad. It asks for ios5. I checked in settings. It is not available under general heading.w
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
Installation of latest itunes update stopped, gave error message "couldn't find MSVCR80.dll" Suggested reinstall. Tried but got same message. Now get same error message when I try to open itunes. Help!
Hey jeight26,
When you uninstalled and reinstalled iTunes, did you use this article?
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Sincerely,
Delgadoh -
How do I update my ipad 2 if my OS is prior to 5.0, it does not have the software dropdown
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
1. Go into the iPad's Settings.
2. Locate and tap "General" from the menu on the left.
3. The second option from the top is "Software Update". Tap this to move into the update settings.
4. Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
5. Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
1. If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
2. Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
3. After canceling the dialog box, iTunes should automatically sync with your iPad.
4. If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
5. After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
6. From the iPad screen, click on the Update button.
7. After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
8. After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
Cheers, Tom -
I can't find software update in general icon in the setting, what can I do
I can't find software update in general icon in the setting, what can I do
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
1. Go into the iPad's Settings.
2. Locate and tap "General" from the menu on the left.
3. The second option from the top is "Software Update". Tap this to move into the update settings.
4. Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
5. Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
1. If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
2. Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
3. After canceling the dialog box, iTunes should automatically sync with your iPad.
4. If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
5. After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
6. From the iPad screen, click on the Update button.
7. After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
8. After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
Cheers, Tom -
i couldn't update 10.8.1 to 10.8.2.
The AppStore.app couldn't find the updates about Mo...Lion. Just iPhoto,
and iPhoto couldn't update too, because it depends on osx 10.8.2!!!Do you have one of those newer Macs which require a special update? From other posts, it seems there are now three different OS versions/updates - each one of specific Macs.
I'd call Apple and give them your serial number as well as - important - your build number (click on the Apple and About this Mac; under Mac OS X, click on the numbers until you get to build .......)
Here are two that might be for your model:
http://support.apple.com/kb/DL1603
http://support.apple.com/kb/DL1611
Maybe you are looking for
-
i recently purchased officejet pro 8610. I followed all instructions . My OS is Windows 7 32 bit (all updates cuurent). My device manager shows OTHER DEVICES, HP Officejet 8610, drivers not installed (code 28), i made several attempts to UPDATE DRIVE
-
Wrapping of Text in the Table UIElement
Hi Is it possible to wrap the text in the header of a Table UIElement.Whenever a column heading is created it keeps extending on one single line. Any suggestions. ravi
-
Configuring scenario to add Sender Party to a message from an IDoc
I want to make sure that when an IDoc is received in the XI system, the message Sender Party is populated. Currently I am trying to do this by associating the IDoc communication channel with a Business Service with a party. I was expecting that this
-
What's The Maximum Capacity of Mac Mail
Hi All I am new in Mac world, I was using outlook in windows with many email, the email files around 3GB, I did the converter of emails by using outlook2mail application. My questions are, how much the maximum capacity of mac mail, and now I am using
-
Hi there, I'm using a PHP sendmail script, although I want some of the writing to be emailed in BOLD font, it isn't the field results, it's the bit after the 'sprint' in the script I'd ideally like to be bold. Would be fanastic if anyone could share