HT4623 I have a big problem with my IPhone 4 since I've updated to IOS 6.0.1.

I've got a problem with my IPhone 4 since I've updated to IOS 6.0.1. After the call I'd like to end the call but the picture on the screen becomes magnified
so that you cannot see anything and the screen is not reacting. I need to restart the phone. But 7 or 8 times daily to restart the phone  is not really convenient.
Has got anybody the same problem? How can I go back to IOS 5 ? Before the update I was a happy user of IPhone.
Thanks for help.

Downgrading your ios is unsupported by apple. Go to settings, general, accesibility, zoom off..?

Similar Messages

  • I have a big problem with my Iphone 4...the pics and videos that i capture, often shows as inverted or orientted by 90/180/270 degrees. photos, one can rotate, but how about videos... is there any way i'm going wrong? this wasn't happening earlier

    My question...
    any answers pl.
    I have a big problem with my Iphone 4...the pics and videos that i capture, often shows as inverted or orientted by 90/180/270 degrees. photos, one can rotate, but how about videos... is there any way i'm going wrong? this wasn't happening earlier

    If I've understood you correctly then the ALLEXCEPT function may be what you're after and it could be applied in a similar way to the following...
    =
    RANKX(
    ALL(Table1),
    CALCULATE(
    COUNTROWS(table1),
    ALLEXCEPT(Table1, Table1[ContactReason])
    DENSE
    If this has missed the mark, would it be possible to clarify the requirement further?
    Regards,
    Michael Amadi
    Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
    Website: http://www.nimblelearn.com
    Blog: http://www.nimblelearn.com/blog
    Twitter: @nimblelearn

  • Hello community I have a big problem with my iphone 4s as precent problem with wifi and ios7. my phone was a champ when actualize this, eh degrade searched everything but I can not because I get the error 3194. I want a solution please

    Hello community I have a big problem with my iphone 4s as precent problem with wifi and ios7. my phone was a champ when actualize this, eh degrade searched everything but I can not because I get the error 3194. I want a solution please

    This support document http://support.apple.com/kb/ts4451 relates to the 3194 error. Generally this error has to do with trying to install an iOS that is not the most current. Maybe you tried to jailbreak the phone, or downgrade iOS? Any of this apply to you?

  • Tons of problems with original iphone since 2.0 update

    i have the 4gb iphone got it the first week it came out and have not had a problem with it since it came out. I think in the past year i had to restore it twice. Since the 2.0 i have a list of problems.
    1. when i turn my phone of it turns it self right back on.
    2. The speaker sounds like it is blown it make a bad crackling.
    3. I keep getting a message that tells me that my phone is not compatible with this accessory would i like to go in to airplane mode. Even thought nothing is plugged in and with this problem it turn the screen on every couple of min so my battery is dead by mid day.
    4. My sound sometimes does not work ex. keyboard or apps.
    5. and i have not been able to download apps or from my phone or. i have to delete the app from my phone and reinstall it.
    with all these problems i have to restore my phone once our twice a week to get it to work properly. i am at the point of going back to my old phone just so i can have a phone that will work all day.

    I tried restoring the iPhone as a new one, but since it wont back up on iTunes in the first place after the restore I get an error stating "the last backup on xx/xx/2008 is corrupt" and had to re-enter all new contacts just like when I first bought the phone. This only happened after the 2.0.2 software update...what the he11 did that update do my phone? I'm almost hoping i can return this phone to get my old one back...which actually worked btw.

  • Big problem with my iPhone 3Gs. Can't activate iOS 5... I'm already using at

    HELP!

    are you able to see the apps on the home screen? If so, it's most likely an issue with your carrier
    This is also an issue that can appear on devices that have been modified in an unauthorized manner (not judging, just saying)

  • Helloo! I have super big problem with my Air.

    Helloo! I have super big problem with my Air,10.8.5 ,it asks every 10 sec to make some changes and asks me for password all the time!! I cant acces my documesnt,pics,music,NOTHING at all! Finder is not working,i cant open any folder,icons are missing also,i cant open any of them,mozzila,chrome..im really going crazy.. i updated tonight my phone on new IOS 7 through my comp,cant be that i messed up everything because of that..this comp.is like 10 days old.
    btw. i created new user,and everything is working ok.

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • I have a big Problem with IMessage

    I have a big problem with IMessage. Yesterday I downloaded a new keyboard form the settings and option that says keyboard (Japanese) I deleted the keyboard shortly afterwards and now my IMessage will not let me type any messages. I do not know what to do.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Messages>Send and Receive and sign out and sign back in
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • HT4623 can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same proble

    can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same problem. I have swapped sim and my Sim is working on other iphone with ios 6.1.3

    Try a new SIM from your carrier.  If that doesn't work, make a Genius Bar appointment and get your phone evaluated.

  • Hye guys i've a problems with my iPhone : since few days i can't open my application 'apple store ' .. It's very strange ! So have you solutions ?

    Hye guys
    I've problems with my iPhone , since few days i can't open my application Apple store  .. It's very strange because it's the first time ! And everything is okay in my phone .. If you have solutions tell me !

    Hello again,
    I just realized that it was the Address book I was looking for, and it's there. I'm sorry --and embarrased- for the confusion!
    I can't delete the discussion, so please considered resolved!
    Thanks!

  • HT1476 I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out i

    I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out in this.

    Hi melvin victor,
    Welcome to the Support Communities!
    The information below may help you troubleshoot your iPhone battery issue:
    iPhone Battery and Power - Apple Support
    http://www.apple.com/support/iphone/repair/battery-power/
    Battery & power
    Is your iPhone battery draining too quickly or not holding a charge? Try restarting it first. You can also adjust several settings to extend the battery life of your iPhone.
    I hope this information helps ....
    - Judy

  • Hi - I cannot upload my emails through the mail icon.  The first time I tried it only loaded very old emails, I then tried the whole process again and it has not imported a single email.  I use hotmail, and have had no problems with my iPhone or iPad.

    Hi - I cannot upload my emails through the mail icon.  The first time I tried it only loaded very old emails, I then tried the whole process again and it has not imported a single email.  I use hotmail, and have had no problems with my iPhone or iPad.  So the only way I can check my emails on my mac is to go through the internet.  Can anyone help?

    Hello, do you mean Download?
    In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
    Then click the Show Details button & Check again.

  • Just recently, I have encountered a problem with my iPhone. When someone calls, I can clearly hear the caller, but the caler canno hear me speak. Sometimes the problem goe off and works properly, b most of the times, I am facing this problem.

    Just recently, I have encountered a problem with my iPhone. When someone calls, I can clearly hear the caller, but the caller cannot hear me speak. Sometimes the problem is nt there and works properly, but most of the times, I am facing this problem. I have tried plugging in the earphone and speak, but its the same.... can anyone advse what may be the problem?

    iphone 4g have this problem
    first solution :change the flex micro
    second solution : ic audio must reballed
    also watch video
    http://www.youtube.com/watch?v=C-n1LJEK3PM
    http://www.youtube.com/watch?v=prSZ9yJnofY
    http://www.youtube.com/watch?v=tkEiR6OPhhc

  • Hey, i have very strange prob with my iphone 5(latest version/updated), after resetting it, so it doesn't connect to my laptop, even it doesn't charge too. it does charge from wall charger i try all the possible methods but still i am facing the prob

    Hey, i have very strange prob with my iphone 5(latest version/updated), after resetting it, so it doesn't connect to my laptop, even it doesn't charge too. it does charge from wall charger i try all the possible methods but still i am facing the prob any fix/solution for it.. Helppppp!!!!!!!!!!!!!!!!!!!!!!!! As soon as possible, it will be gratefulness,
                                Thnksssssss....

    So you are saying that you followed all of the steps in the support document for problems with connection, including removing and reinstalling iTunes? You do not say what you have tried, so it is hard to make recommendations. If this is the case, then you have tried resolving driver issues? What if you go to Device Manager and look for the iPhone. You should be able to click on it and see about drivers. You can update/reinstall the device driver.

  • I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8.  Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8?  Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

    I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8.  Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8?  Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

    The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    System Requirements for 10.6:
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible internet service provider: fees may apply.
    You can upgrade direct from 10.6.8 to 10.8 Mountain Lion without going through 10.7 Lion with the Late 2008 model 5,1 Aluminum Unibody. The Model 5,1 will probably run 10.9 Mavricks when it comes out.
    10.8 Mountain Lion is a download from the App Store, the price is $19.99.
    Mountain Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
    As for third party programs see this list for compatibility with 10.8 http://roaringapps.com/apps:table
    Also Mountain Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Mountain Lion.
    Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

  • I have a serious problem with my iphone 4 it hangs on me with the logo and a wheel and i have to reboot it all the time i even lost my contact pls help

    i have a really big problem its my iphone 4 its hangs on me and suddenly show the apple logo and the wheel and freezes on me
    and before i know i have lost all my contacts as well
    pls need help on this

    Restore your iP4... http://support.apple.com/kb/HT1414
    Are you syncing your contacts with something.  If so, they are not lost.

Maybe you are looking for

  • After Restoring with Migration Assistant internet accounts are not working properly

    Hello! My Macbook Pro's HDD fried a week ago, so I swapped it for a new one. I had a backup from about 30mins before the issue happened, so I thought everything would go fine with Time Machine. Well, not quite. After installing Mac OS X Mavericks fro

  • Crashing on Mac OS 10.8.3

    After installing Mac OS 10.8.3 and the latest version of Flash 11.7.700.169 I cannot open flash from preferences. It completely locks up, must force quit. Also crashes when loading farmville game from facebook. Please help, the wife is frantic to far

  • Macbook Pro password not working

    When attempting to download software, the password I've always used has not been working. When I click on the question mark, the "loading" symbol just comes on and never turns off. I thought I changed the password just now, but it still is not workin

  • Weblogic web server v/s apache

    Hi, Does anybody have any experiences to share about using weblogic as a web server versus using apache or something else? Any idea on what is the market share? Any links to useful information that anybody can point me to? I did find a similar questi

  • GENDAW32 - Error

    Hi All, My GENDAW32 transaction is not writing any output batch file ; though the records are there in Nafile and Polfile. As Batch File is empty; our print command is not creating any pdf. Could you please help me in the rules that should be there i