HT4623 I have an iPad mini. I chose to update my aps. I bought the iPad in the US but live in Guatemala. Now I cannot download any of the new versions of the aps. Is there a way to do it?
I have an iPad mini bought in Florida. I live in Guatemala. Today I was given the opportunity to update all of my apps. I chose to click on that choice. Now I have no apps. What can I do? Thanks, Phyllis
If you are using the same Apple ID that you used to buy them, it should not be a problem. You must have changed the Apple ID associated with those apps.
Similar Messages
-
Hi. Bought recently iphone5 from singapore. but the one who sold us the phone has set restriction. now i cannot download any apps from my itunes. I dont know the restriction code so i think i need to reset my phone. does resetting remove the unlock?
You need to restore it with iTunes or wipe it from the phone itself... Settings > General > Reset > Erase All Content and Settings. Either of these will create a factory fresh phone, thus removing the restrictions. Note that ALL user data will be wiped.
-
I have an iPhone 4. I recently updated. It loaded all my iTunes music purchases but not the music I had on my computer. This music was on my iPhone before I updated. I have tried re-sycing but not getting anywhere. Says it cannot locate my music files but I see it on my lap top but cannot play it or get it on my iPhone. Can anyone walk me through this?
C Mawle wrote:
Thanks. I have followed all the instructions as recommended and nothing has worked so it looks like the restore/update may have been interrupted - would loss of internet connection do this?
Yes it would, possibly even brick it.
Have successfully connected my ipod nano with iTunes so looks like the device driver is working.
Can I use my ipod nano USB connector to check?
It is not much help to you, since the device that you need still not recognized.
Anyway looks like I may have to swallow the loss of data. Have set-up a call for tomorrow with Apple support so will wait until after this before doing the factory restore!
Good luck, but if you expect miracle from that call good luck again. -
Hi. I somehow managed to delete the app store tab on my iphone homepage. Anyone know how I can get that back? I just got this and now I can't download any apps! Thanks!
You cannot delete that icon. More than likely it's just been moved to another page. You can use Spotlight to search for it if necessary.
-
I would really like to download apps however this isn't possible as safari, app store and itunes are deleted from my homescreen? Where can I go about installing them to the phone again a.s.a.p??
Check Settings > General > Restrictions on Safari, iTunes, etc.
-
i have a song bought on one computer and it didnt ask to transfer it to another one of mine and i synced it to the one and now i dont have the song, is there a way to downlad it again? besides going to the other computer?
Copy everything from the old computer or your backup copy of your old computer to your new one.
Type "move itunes library from pc to mac" or similar into the google search bar. -
i have one computer and 2 iphones i want to sync music on. but we want different music on the phones. is there a way i can make 2 libraries on 1 itunes?
You can create an alternate library: http://support.apple.com/kb/HT1589
But it is easier to create one or more playlists and sync by selected playlists. You can have some playlists for both phones and others for just one phone.
Here are some other tips: How to use multiple iPods, iPads, or iPhones with one computer, http://support.apple.com/kb/HT1495 -
I had to trade in my iPhone for an android, I did not unencrypted the back up on iTunes, i no longer have access to the phone, is there a way to get to my data?
The difficulty is you have to unencrypt during the restore process, which you cannot do with an Android device.
See: http://support.apple.com/kb/HT4946 -
I have creative suite version 5.5 Isn't there a way to just upgrade the software without using the cloud and a monthly plan?
Only to the 3+ year old Creative Suite 6
-
Help,
i have just put a screen protector on my iphone 4 and where there was something on the film it seems to have eaten into the screen. is there a way to clean these marks off?I wouldn't worry. Assuming you haven't hacked the phone you cannot have installed any viruses or spyware just by clicking a link in an email. Sounds like the page you accessed could not be read on the phone anyway, or it was just a dead link.
-
I accidentally washed my 6th generation iPod nano. It will turn on still but now it has a computer screen setup on the screen, is there a way I can get it back to normal? I can plug it into my computer and it works and I've click the restore button that comes under the nano's summary when it's plugged in. Any type of help would be greatly appreciated. Thank you!
Take your iPod Nano back to the Apple Store. Let them see what you are seeing. Only this time............
Prior to leaving the Apple Store: ***Make sure you have the store staff power the iPod Nano up and demonstrate that it is indeed working properly to your satisfaction.*** -
I have an ipad I used with a computer which's now broken. I bought a new Macbook Pro and signed into iTunes with my usual Apple id and pw. I connected my ipad to the new Macbook but it won't back up my photos or Apps from the ipad to the new macbook. Help
What do you mean " back up my photos or Apps"?
The photo sync is one way - computer to ipad.
You can transfer itunes purchases. Without syncing: File>Transfer Purchases
Copy everything from your backup copy of your old computer to your new one. -
my ipod was stolen and i finnaly was able to get into my account after they changed the password is there a way i can fid the locaition of my ipod even if it has died ?
No. The only way is if the FindMyiPod feature was already set up and wifi is on. However, that can be defeted by turning the iPod off or restoring it. If they have access to the iPod then can just turn the feature off.
If the iPod off/battery drained how would you expect there t be a way of finding it?
Apple will not help. -
Why you receive a notification and you get the banner across the top is there a way you can swipe or something to get it to go away?
Hello,
Unfortunatelly there is no option to automatically reload the sequences that got modified outside the current application.
I'm not quite sure why you are getting this message. However, since you mentioned you modified the process model, I have a couple of suggestions:
1) Make sure you are not modifing your sequences at runtime. Usually you get this message when you modify properties under SequenceFile. This is the File object and if you change it, TS may reload it.
2) When you call your sequences, also make sure you have the same prototype for the parameters your sequence is expecting and the ones you are sending.
Maybe you can gice us some more details about how you executing this sequences and how you modified the process model.
Regards,
Roberto Piacentini
National Instruments
Applications Engineer
www.ni.com/support -
I have 50 iPads and 50 codes, but I am not able to install the app on the last ipad using Apple Configurator. One code in the spreadsheet says it's already been used but shows no serial number or device name.
Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy
Maybe you are looking for
-
What happens when a OUT parameter of a web-service returns an empty string
Hi, Any idea on how to deal with the situation when a web-service returns an empty string I get the following System Exception:- Caused by: java.lang.AssertionError: Attempt to set empty javaType to ticketResponse(out,0) :: fuego.type.FuegoClass$Lazy
-
Keep using cs5.5 or buy cs6 master?
hi is 5.5 master still considered a fair updated version for basic graphic design use in 2014 or should i buy cs6 master? or should i just keep using 5.5 and dont waste money on cs6 master because it wont get updated like creative cloud. i am trying
-
VMs on Hyper-V 2012 R2 are shutting down automatically
Hello Guys! I'm having a huge problem in my Hyper-V 2012 R2 environment. Yesterday, 9 of 40 VMs were shutdown automatically, and so, caused a downtime problem to my customers in the business hours. I checked in the Event Viewer (Application / System
-
ABAP/4 runtime error SNAP_NO_NEW_ENTRY
Hi All, I am unable to login in to my SAP server, after entering user id and password, the below ABAP Dump is displayed ABAP/4 runtime error SNAP_NO_NEW_ENTRY I have checked the SAP notes, but no luck Please advise SAPXPT
-
How do I import work paths from photoshop CC to Illustrator
Making a vector logo for a client, haven't done this in forever and must be doing this wrong. Created a work plath in PS CC, then exported work path to AI. Opened the new AI file, and at first it appeared to be just a white box. I can see the work pa