HT4623 I have just updated to the latest ipad setting and my search engine no longer functions, please help.
I should like to know if this may be a problem with the latest update iOS 7.1 and how can I correct it ,please. Thank you for your help.Rensah
Hi JimHdk
I was attempting to use google to find information. Google stopped working for at least half an hour. I decided to plug the ipad in to recharge as the battery was below 50% and left it. Later, On restarting the ipad I discovered that the search engine was, and still is, working.
I have heard that previous updates have caused problems to iPads etc and considered that this might have happened with this update, despite being unaffected on previous updates.
My ipad is fully working now but I am curious to know why it happened as it has never stopped working since I purchased the ipad 18 months ago.
I appreciate your contacting me I order to help. Many thanks, Rensah
Similar Messages
-
i have just updated to the latest ios 5 and have lost apps and their data, can i reverse the new update to get back what i had on my ipad?
There is no need to do that, I had the same problem pal! Just do this and all should be fine!
Delete one of the app's and re-install it, then for some reason everythign is restored to as it was!
Hope you get on fine, let me know!
Thanks
Dan -
Have just updated to the latest version of ios6 on my iPhone 4Sand now I can't see the apps that need updating. Is showing 8 but just left with blank screen- how do I fix this?
Look for the little Flag button in the lower left corner.
-
I have just updated to ios7 on my iphone and don't like the look and feel of this update. Where are all the colors and texture of all the older isos, all those white background colors,yuk. Is a way to go back to the ios6
"Unlike". iOS 7 doesnt display well on my 4S. iOS 6.1.3 should still be supported for older hardware. I think I shall me moving to Samsung Galaxy now. Was really hoping hte new iphone would get a bit larger.
-
I've just updated to the new iOS 6 and all my contacts have dissappeared, is there a possible solution to bring them back, I really need them back. Thanks in advance.
You tried clicking on "phone" then "groups" and "Show All Contacts"
-
I have a 4S and just tried updating to the latest iOS version and my phone went into recovery mode and iTunes says I need to restore to factory settings. Anyone know how I can fix my phone without losing all my content?
You would only be able to restore to a backup to iCloud or iTunes:
Restore from Backup
Cheers,
GB -
I have an IPhone 4 which I just updated with the latest software, which put in it in Recovery Mode. It has the picture of the plug with ITunes, I downloaded it now its saying its in Recovery Mode, how do I save all of my previous data without Restoring?
I updated the phone before backing it up on iTunes, now the update wanted me to connect the phone with iTunes and it says the phones in recovery mode and it must be restored before its used with iTunes. I go to click restore and it says it will reset it to factory default and I'll lose all my current data. I have all my sons pictures and videos along with this notes. I can't lose all of this data! Please help!You have to restore the iPod, no ifs, ands, or buts...
After iOS is installed you will be asked if you what to set it up as a new iPod or if you want to restore from a backup.
If you have a good backup you can restore that and you're good to go.
If you don't have a good backup, then you end up with a "clean" iPod.... -
Hi,
i just updated to the latest aperture, i have projects previously saved on a drive (in the old version) that now won't load... how do i update them?But, unless I missed something, you are doing the repair with Aperture 3.5 so if 3.5 can't open an earlier library before doing the upgrade then unless I'm missing something the library will be upgraded before the repair is run, no?
OT:
You got me there, Frank - I wondered about the same thing, but Aperture is behaving differently, when upgrading a library, depending on if you are launching into the First Aid Tools or not.
I repeated my experiments, to explore this difference:
I restored an Aperture 3.4.3 library and launched the First Aid Tools:
Apertur went directly into First Aid Mode without first asking to upgrade.
Then "Repair" asked to be allowed to upgrade the library as you predicted.
During the upgrade "Aperture"showed "Rebuilding", not "Repairing" or "upgrading".
Second experiment: When I only double-click the 3.4.3 library instead of repairing, the upgrade alert is very different:
It takes a shorter time and does not show "rebuilding".
I am quite certain, that Aperture will use a different upgrade prodecure, when launched into the First Aid panel for repairing or rebuilding. -
I Just updated to the latest Apple TV software and now have no Movie trailers. Have they done away with Movie trailers?
Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help -
I just updated to the latest version of iTunes and now it will not sync with my iPhone 5
I just updated to the latest version of iTunes and now it wont detect my iPhone 5 to sync. Can anyone help? I am running on Windows 8.
I have already gone into control panel and repaired the program. Nothing is working!See the tt2 user tips for help:Troubleshooting issues with iTunes for Windows updates
-
I just updated to the latest version of itunes, n ow when I plug in my iphone, it says it cannot sync because "apple mobile device service is not started" this never happen before, what do I do??
The Apple Mobile Device Service is a part of sever programs that "help" iTunes on Windows. It may have been disabled in the Microsoft program, msconfig, or using a third party utility, such as CCleaner.
I would suggest trying to find and enable the service. To do so, click on the start button, click "run", and then type "msconfig" look for the iTunes Helper entry and make sure that it's enabled.
Additionally, there may be another service which you will have to enable. You can type something like "service.msc", (I'm not sure exactly) to see the "Services" control panel and look for it there.
If you can't find either, feel free to post here again.
Message was edited by: MoshBerm -
Question
I just updated to the latest version of Firefox and now I can no longer download facebook videos with realplayer as I formerly could. How can I downgrade to my previous version of Firefox?Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help -
after updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?
Download 9.1 and 9.2.3 updates and install them
-
I have tried updating to the latest iTunes, but I am currently running Mac OSx 10.5.8, so I can´t go that route. Any suggestions?
I followed the thread and used the link provided to download iTunes version 10.6.3 (again). The same error message keeps coming up, telling me that I do not have it installed. I tried restarting the computer following the install, but it still won´t acknowledge that 10.6.3 is installed. Any other solutions?
-
Every since I updated to the latest Camera Raw and Photoshop I have the following issue: when I finish the photo in Raw and bring it into Photoshop I have white squares in the Photo. If I crop the photo the white square disappears until I zoom to enlarge it then the white square reappears. I do not believe the squares are saved
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://forums.adobe.com/docs/DOC-2325
Maybe you are looking for
-
OS X starting in graphic mode only - no single user, no recovery
My intel-mac (2008, Yosemite 10.10.2) is suddenly only starting in graphic mode. No keyboard-commands during start-up are working - neither "r" for recovery-mode nor "alt" for chosing the startup-disk nor "s" for single-user-mode. What may be wrong h
-
Can i use a cable to print to a printer
I want to attach a compatable ipad printer to my ipad but not using wifi. I want to attach the printer thru a cable.
-
Flex Mobile App eats memory on device
Hi, I have my flex mobile app that manages a lot of bitmapdata objects. Every bitmapdata is disposed after use. It's a multi-layer drawing app, and I have many SpriteVisualElements displayed on the screen. Every SpriteVisualElement contains 4 SpriteV
-
XSD from PI in Syndicator - no root element selectable
Hello I have created a message type in PI and exported the XSD. However when I want to use that XSD in the syndicator no root element is available. Why is that? I have searched the forums and found that MDM won't show a root element if the XSD is not
-
I have upgraded to os x 10.10 and now anti-virus software is disabled. It is trend micro maximum security. To keep my subscription does this mean that I to go back to os x 10.9.5 Mavericks?