HT4623 I have tried to install the update to my iphone 5 and i havegot a error 3194 i now appear to have a phone with nothing on it apart from on the screen ashing i connect to itunes HELP!!!
I have tried to install the update to my iphone 5 and i have got a error 3194 and now appear to have a phone with nothing on and I cant use! just get the connect to itunes on the screen, but each time i try and update and resore i get the error message 3194 HELP!!
http://support.apple.com/kb/TS4451
Similar Messages
-
i have tried to install new update on iphone 5 and now it wont turn on when i plug it in the charger it just shows i need to connect to itunes.
Given the state your device is in you have already erased your old stuff. You have an image on the screen that says, "Connect to iTunes." That's what the image means. So you will need iTunes on your computer.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS from iOS 5 or Later
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
I have recently done the update to my iphone and then tried to backup my iphone to itunes and an error meesage has occured and now my phone isn't responding to anything and is stating that it needs to be restored back to manufacturers settings, Can anyone help?
Hi d_diotte,
Thanks for using Apple Support Communities. If you're unable to update your iPhone and keep seeing the "Connect to iTunes" image, this article has some steps you can try:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Cheers,
- Ari -
I am trying to install an update of Microsoft office and I get a message that says. This application must be closed ETC..... I am running Parralell and I think it is there. The two programs are "Microsoft Database Daemon" "SyncServicesAgent". How do I close these programs?
If the Office updates have to be run through Win in Parallels, there's not really a section here that covers that , because Neither Office or Parallels are Apple products. There is only a small chance that you'll find someone with BOTH your conditions who just happend to look into a forum on older iMacs.
Parallels has a forum here:
http://forum.parallels.com/forum.php
I think you'll get a faster response there. -
I just installed an update on my iPhone and since then the choice to repeat music, or not, has disappeared and it automatically plays songs and albums on a loop. Anyone know how to make it play an album or song just once?
Basics from the manual are restrt, reset, restore.
Have you tried each of these? -
I have tried to install icloud 4.0 for windows and again is does not allow syncing with outlook 2013 calendar and contact, using windows 8.1 and IOS 8.02 (get - unexpected error)?
Having same issues. had been syncing every few days with outlook 2007 contacts and calendar but since updated to 4.0.2 and latest itunes I get an error that it is unable to sync. I can't seem to find any solution.
-
Recently installed updated IOS on iphone and ipad, but since then I no neither appears in iTunes; keep reading other support responses about the "devices" button, but I do not see it; running 11.1.5.5
Hi Gray Don,
Welcome to the Support Communities!
The article below may be able to help you with this. Follow the steps in order, but step 5 resolves the issue in most situations.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Judy -
I just installed last versión of iphoto and it erased my iPhoto events. Now i dont have iphoto library anymore and i only have my events in iPhone and in MobileMe gallery. How can i download and migrate events in MobileMe gallery to events in iPhoto ?
O also installed lion before and as i had filevault activated y lost my user information in timemachine. So, i have a useless backup. I only have events in iPhone ( due i didnt sync photos) and in MobileMe gallery, and i already migrate to iCloud. So?
-
My ipod keeps showing the apple logo and it goes off then back on, i tried restoring it but it doesnt let me of some error code 3194
See the actions for that error here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
iPhone Error 3194 - How to Fix iTunes Error 3194?
Fix Error 3194 from iTunes during iPhone restore -
BT2010 Installed Cum Update Packs for Adapters and getting run-time errors with WCF-SQL
The process has been working fine for months. Then we installed Cum Update packs to BT2010 (I'll get the exact C.U.'s from our admin guy) and last night got probably 20 errors similar to below.
- Installed CU6 for BT2010
- Installed CU3 for LOB (Adapters)
The SQL stored proc returns a mix of strings, integers, Guids, and dates; the BizTalk schema looks like matches perfectly. The stored proc runs fine in SSMS.
Got two errors for each, 1 in XLANG/s for the orchestration, and 1 for the Send port that calls the WCF-SQL adapter from the orchestration, and also 1 warning.
NOTE: This orchestration runs every 15 minutes 24x7. It calls the Stored Proc to find out which extracts it needs to create. Most all the extracts run at night. So if I run the stored proc during the day, it normally returns an empty result
set. Yet, the error below is happening every 15 minutes, even when the result set is empty. How can it generate a data conversion error when there is no data to be converted?
ORCHESTRATION/XLANG ERROR:
xlang/s engine event log entry: Uncaught exception (see the 'inner exception' below) has suspended an instance of service 'Common.Extract.Orchestrations.EFSRExtractHandler(2b35190e-5f11-e360-9ae8-daaf0372cbc3)'.
The service instance will remain suspended until administratively resumed or terminated.
If resumed the instance will continue from its last persisted state and may re-throw the same unexpected exception.
InstanceId: dc354922-73ef-46fc-ac3d-dbf793e5aaf8
Shape name:
ShapeId:
Exception thrown from: segment -1, progress -1
Inner exception: An error occurred while processing the message, refer to the details section for more information
Message ID: {066027B8-4750-4D63-A746-1390E9959E49}
Instance ID: {5A978538-5DD7-40D1-8826-D0486D129F84}
Error Description: System.InvalidCastException: Failed to convert parameter value from a String to a Guid. ---> System.InvalidCastException: Invalid cast from 'System.String' to 'System.Guid'.
at System.Convert.DefaultToType(IConvertible value, Type targetType, IFormatProvider provider)
at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
at System.Data.SqlClient.SqlParameter.CoerceValue(Object value, MetaType destinationType, Boolean& coercedToDataFeed, Boolean& typeChanged, Boolean allowStreaming)
--- End of inner exception stack trace ---
Server stack trace:
at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult result)
Exception type: XlangSoapException
Source: Microsoft.XLANGs.BizTalk.Engine
Target Site: Void VerifyTransport(Microsoft.XLANGs.Core.Envelope, Int32, Microsoft.XLANGs.Core.Context)
The following is a stack trace that identifies the location where the exception occured
at Microsoft.BizTalk.XLANGs.BTXEngine.BTXPortBase.VerifyTransport(Envelope env, Int32 operationId, Context ctx)
at Microsoft.XLANGs.Core.Subscription.Receive(Segment s, Context ctx, Envelope& env, Boolean topOnly)
at Microsoft.XLANGs.Core.PortBase.GetMessageIdForSubscription(Subscription subscription, Segment currentSegment, Context cxt, Envelope& env, CachedObject location)
at Common.Extract.Orchestrations.EFSRExtractHandler.segment1(StopConditions stopOn)
at Microsoft.XLANGs.Core.SegmentScheduler.RunASegment(Segment s, StopConditions stopCond, Exception& exp)
SEND PORT ERROR:
A message sent to adapter "WCF-Custom" on send port "Send_SQL_Orch_Call_GetAirportsForExtract" with URI "mssql://QADBAlias.datacenter.local//QTAviation?" is suspended.
Error details: System.InvalidCastException: Failed to convert parameter value from a String to a Guid. ---> System.InvalidCastException: Invalid cast from 'System.String' to 'System.Guid'.
at System.Convert.DefaultToType(IConvertible value, Type targetType, IFormatProvider provider)
at System.Convert.ChangeType(Object value, Type conversionType, IFormatProvider provider)
at System.Data.SqlClient.SqlParameter.CoerceValue(Object value, MetaType destinationType, Boolean& coercedToDataFeed, Boolean& typeChanged, Boolean allowStreaming)
--- End of inner exception stack trace ---
Server stack trace:
at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult result)
MessageId: {C1FB3913-42EB-4957-9289-16D03B02674E}
InstanceID: {46C9D190-902F-48CE-86CF-D8C3C5B8944D}Hi,
About the error System.InvalidCastException: Failed to convert parameter value from a String to a Guid
, maybe the field on the database is varchar(string type).
And you can refer to the similar discussion:
http://stackoverflow.com/questions/12816641/failed-to-convert-parameter-value-from-string-to-guid
Hope it can help you.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I can't use my iMessage or my FaceTime and I just got the update to fix it and it still says "error
IiPad mini, just updated today to iOS 8.1.3. This update was suppose to fix having problems getting into iMessage and FaceTime but it didn't on my iPad mini. I just startEd having trouble last week. I have tried changing my password n restarting it but that didn't work. a message comes up "error with activation " please try again. Any ideas would be helpful.
Go through the standard troubleshooting steps again and if that still doesn't fix it, make an appointment at an Apple Store and seek their help.
If you get an error when trying to activate iMessage or FaceTime - Apple Support
I would also report the problem to Apple to let them know that their much awaited fix, didn't work. -
Trying to install Square to accept credit cards on my ipad. I get the following message. KQHTTP Operation Error Domain error 422. What is this?
I am having same problem. Did you find a solution?
-
HT201210 4s updated to ios 6 and lost my network error 3194
i have just updated my 4s to ios 6 and ios 6 is running but my phone says searching where the signal bars usualy are and get an error code of 3194 when trying to restore, i have tryed turning it on and off, removing the sim, removing internet security and firewall, every thing is up to date windows 7 and itunes about to pull my hair out as i need my phone as a matter of great importance, absolute nightmare and bin through the apple troubleshoot rubbish (not helpfull in the slightest)
please can some one help !!!!!iTune>Purchased>re-download your songs
-
Cant's install Adobe Illustrator. Can anyone help?
Hi, Thanks Ned. I click on the 'try now' or install icon and then the download begins. When it gets to about 50% installed it stops and says, install fail then try again. I try again and again, but each time its stops at about the 50% point.
-
I've updated my iPhone 4s and it's gone into recovery mode !!! I don't want to lose the pictures is there any way I can start it up with out going into recovery mode
Do you have any recent backups? Once in recovery mode there isn't many options available too you unfortunately.
Cheers!
Maybe you are looking for
-
Can I launch a Macro from an IF statement in a Bus. Rule?
I am trying to write IF logic in a business rule to run a macro based on a Planning form-driven variable. However, my rule will not validate. For example: IF([variable] == 'Budget') %MYBUDGETMACRO(parm1, parm2, parm3); ELSE %MYOTHERMACRO (parm1, parm
-
I just wanted to update firefox and it won't let me. I drag the icon into applications, then a window ask me if I want to replace older version. I click yes and the window mentioned above appears. I purchased this computer new, I'm the only owner. Wh
-
Error message starting Adobe Photoshop CC 2014
Dear, After a first download of Adobe Photoshop (as part of the Creative Cloud) I get the below error message when starting the application. Any suggestions or ideas? Windows 7 pc with full admin access rights and full rights to pass through the fire
-
How to handle ALV background run when we use REUSE_ALV_HIERSEQ_LIST_DISPLAY
Hi, I am working on a program which outputs ALV "Hierarchical sequential list output" by using function module "REUSE_ALV_HIERSEQ_LIST_DISPLAY"(pls see the code below for reference). When i run this report with the menu option "Execute in Background"
-
Carriage Returns / Line Breaks
I have a requirement to display a customers address in 1 column of a report. The address is stored in the RPD as Address1, Address2, etc. etc. Can I create a formula that concatenates the address fields and puts a line break, carriage return after ea