HT4623 I have updated my iPhone 5 but after this update it does not accept charging

Dear Sir/Ma'am,
I have update my iphone 5 software with iOS 7 but after this update it does not accept the charger or neither any charging ?
I need to know how to solve this issue please.
Thank you

Well when you download the update with iTunes it will always download the whole new version (in your case 7.0.2) even if its just an bug fix. If you already have 7.0 download the update over-the-air.
You already wrote that the update is only 21 MB, so its not the whole firmware package of 7.0.2 you get with iTunes.

Similar Messages

  • I have an I Pod Nano and would get messages to update my software.   In my I Tunes I have 1,900 songs but after the updates it will only sync 933 songs.  My current software version is 1.0.2.  What am I doing wrong or is it something in the software.  I h

    I have an I Pod Nano and would get messages to update my software.  In my I Tunes I have 1,900 songs but after the updates it will only sync 933 songs.  My current software version is 1.0.2.  What am I doing wrong or is it something in the software.  I have not done anything different in my I Tunes and all songs are checked.  Could someone please help or advise me what to do?

    Thank you Gail, but not to be ignorant but can I send you a print screen on what I am looking at.  I will try am explain what I see: I hooked up my I Pod Clicked on Music checked Sync Music 1909 Songs select Playlist, Artists, albums, and genres checked Include music videos Playlists checked 50's Music checked 70's Music checked 80's Music checked 90's Music checked 2000 Music checked 2010 Music   These are songs that I downloaded onto my I Tunes.  I bought me a new computer but when my data was transferred from old computer to new computer a lot of my songs on my hard drive were lost, but they were able to save all my songs on I tunes.  My I Pod is still connected Clicked on "On this Ipod" Music 938  Songs 2.2 days So my question to you is if I have 1,909 songs on my ITunes how come only 938 transferred to my IPod.  I checked my IPod and it shows only 938 songs transferred.  This did not happen before until I Tunes asked me if I wanted to update to a newer version.  Last month I did have all my 1,909 songs on my I Pod.  I hope this explains what I am asking

  • HT201210 i tray to update my iphone but refused to update iOS 6.and give me note there is problem in dawn loud . please tell me what can i do?dawn loud

    i tray to update my iphone but refused to update iOS 6.and give me note there is problem in dawn loud . please tell me what can i do?dawn loud

    Error 2, 4 (or -4), 6, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • I updated to ios 7 and now the battery does not stop charging any ideas, or have to wait for update? thanks

    i updated to ios 7 and now the battery does not stop charging any ideas, or have to wait for update? thanks

    To show the battery percentage used go to settings
    from there click general scroll to usage and select
    scroll to bottom of page for battery usage select on.
    This will show the icon battery and the percent numbers on the top right.
    When phone is connected to an outlet sometimes it does not always show complete charge. I do not understand why but it is what it is.
    FYI I sent reply to you not to deggie. You can have your own satisfaction to reply direct.

  • My iphone charged but when it turns on does not continue charging also windows and itunes do not identify my iphone!!! please help

    My iphone charged but when it turns on does not continue charging also windows and itunes do not identify my iphone!!!
    please help

    Macafee security center is may be the culprit.
    Open Macafee then: select;
    Internet & Network > configure
    Firewall > Advanced
    Programm Permissions > scroll down to Itunes
    Highlight (click on)
    Then Grant full access to Itunes.
    APPLY then OK
    When you select store from Itunes you will need to register with Itunes.
    Try that or:
    Disable your firewall.
    I Hope I Was Able To Help You Or Solve Your Question.
    Simmm
    3/12/2012
    If Someone Helped You, Click
    "This Helped Me"
    If Someone Solved Your Question, Click
    "This Solved My Question"

  • Battery shows charging but stuck on 28% and does not hold charge

    i am using HP DV6-6107tx, i got a new extended battery from anker which seemed to be running fine untill it discharged while i was playing watch dogs.
    now my laptop wouldn't power on just on the battery, everything works fine if it is on charging, but the battery does not hold charge and my system powers off immediately on removing AC adapter. the battery shows "28% Charging" but does not increase or decrease the percentage even after hours of charging both while system is on and off.
    i checked the battery in battery test from HP Support Assistant and it says that the battery status is ok, now i have tried the below methods with no luck :
    power off and press power button methods.
    uninstall and reinstall battery from device manager methods.
    battery check from HP Assistant.
    updating Bios to F.1b method.
    updating the HP Support Assistant.
    and all the other methods i could think of or read on HP's site.
    can anyone guide me as to what is the issue here ?       i don't have another machine to test my battery on, the charging lights are fine except that the light does not change color which it did on full charging the battery. i did try on 2 different adapters.
    now if it were a motherboard or IC issue, would it not have said 'not charging' in windows ? in my case it says charging.
    any help would be greatly appreciated.

    Hello, M_Bilal
    Welcome to the HP Forums.
    That you for provided such a detailed post with what you've already completed, for the issue with your battery. I will try to guide you further.
    I would like to provide you further documents for troubleshooting, but you've essentially completed what I have for this issue. The only step left, would be to test the battery.
    You can do this with another battery, or in another notebook. I know you mention another machine, but if you know someone who does or someone who has a compatible battery. This would test that. You could even see if a local computer shop could test it.
    The reason for this, is if the battery is the problem, it's much easier and more affordable replacement. Also, you mention it being new, might have warranty.
    The other possible cause to the issue you've touched on, that would be the system board. Testing the above, would just confirm if this is the problem or not. From there you could decide on what you'd like to do.
    I know, there really aren't many suggestions here, but I hope this can provide you with the next step.
    Let me know how things go, with the route you choose to troubleshoot.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • Since updating my Iphone 4S to ios6 the battery does not hold. Anyone else have this problem?

    Since updating my iphone 4S to the iOS 6 system my battery runs down quickly. I would like to know if this is happening to others or if there is a setting I should check.

    http://discussions.apple.com/thread/4310494?tstart=30 go thru the suggestions given.

  • Firefox previously worked fine but after installing new version does not open. Opens in the same day that I install it but not after restarting computer.

    I just installed the new version of firefox. My firefox worked fine with the previous version. But the new version only works on the day I install it but the next time i start my computer it does not work. It does not open after clicking the icon. I even uninstalled it and then reinstalled it but again the same thing happened. I have no idea about plug ins etc. but I did not install any new ones.

    This is a very interesting issue. Let's start with trying [[safe mode]], [[managing profiles|new profile]], and [http://firefox.com/all-older.html installing an older version] - if one of these works, please don't do the rest and reply here.

  • I updated my iphone 4 with io6, my password does not work

    Did not have problems connecting with apple-id and password, after io6 update, my apple-id sign in is not working. Any solutions ?

    I think they have to upate the Itunes store first to use passbook

  • TS3682 I have erased my iphone in error and now itunes does not even detect it do I can't restore from the backup

    I have erased my iphone in error and want restore from my backup but all I have ia a black screen with a white apple and its not detected by itunes anyone anyideas to help me

    Place your phone in recovery mode (search Google) and restore.  If that doesn't work, place in DFU mode (again, search Google) and restore.

  • I have old CS5 disc, but my new mac book does not have disc drive and cannot figure out how to  download it from adobe. they give several choices of cs5 but I do not know which one to choose. Even when I do choose one, it does not take me to a download bu

    I have a CS5 disc but cannot find out which one is mine in the long list of choices. When I click on one, it doesn't go to a place to enter
    serial # or a download button

    Ohrita you can download the installation files for Creative Suite 5 at Download CS5 products.  You can verify the software license you purchased by checking your account at http://www.adobe.com/.  You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

  • HT1911 Great if it worked - BUT IT DOESN'T - have reset my password but your USELESS ITUNES STILL WILL NOT ACCEPT MY NEW PASSWORD

    HAD MY ACCOUNT BLOCKED BECAUSE YOUR SYSTEM WOULD NOT ACCEPT MY PASSWORD
    WENT TO RESET PASSWORD AND YOUR SYSTEM WOULD NOT ACCEPT MY BIRTHDAY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    TOLD IT TO SEND AN EMAIL ........................ 10 REQUESTS LATER, GOT ONE EMAIL
    RESET PASSWORD ...... ALL ACCEPTED ............ UNTIL I GO BACK INTO THE EVER USELESS AND FUTILE ITUNES
    NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO PASSWORD NOT ACCEPTED
    MUST BE RESET
    RINSE AND REPEAT .......... OH AND INBETWEEN ................... SYSTEM TIMES OUT ................. INCREDIBLE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    SO NOW, SITTING OVERSEAS, NO ACCESS TO ITUNES AS ACCOUNT STILL BLOCKED YOU MORONS

    THESE ARE MAINLY USER-TO-USER FORUMS, YOU ARE NOT TALKING TO ITUNES SUPPORT HERE. AFTER RESETTING YOU PASSWORD HAVE YOU TRIED LOGGING OUT AND THEN BACK INTO YOUR ACCOUNT TO SEE IF IT THEN WORKS ?

  • My bank homepage displays fine, but after I login it does not.

    The graphics on the screen disappear, and what should be in the menu bars is listed on the left, one item on a line. This does not happen with IE11, and the bank esupport group says they have not seen it before.

    Did you check for issues caused by the Privacy Badger extension?
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Unable to restore iphone, asking for password which it does not accept

    Hi,
    I am trying to restore my iphone.  I get so far when its asks for a password but it will not accept it.
    how can I restore my iphone without a password?  I have lost all photos, contacts, apps and messages.
    thank you    

    Hi, teenab77
    Thank you for visiting Apple Support Communities.  
    It sounds like you are attempting to restore your iPhone from an encrypted backup and it is requesting a password.  Here is a troubleshooting article that I would go through for this issue.  
    iOS: Troubleshooting encrypted backups
    http://support.apple.com/en-us/HT203790
    -Jason H.  

  • Pls someone help me out. my iphone 4 just crashed .. it does not even charge nor start???

    i downloaded this new app swann veiw pro in the morning and now when i accessed the app in the evening ... after 30mins or so my phone just crashed and would not start. i thought it be be the battery but it is not even charging. pls help someone

    A quick search here did the trick and I think I am back in business.  My battery was fully charged, I knew that was not the issue, so I held down the Power button and the Home button for 15 seconds and the phone reset and rebooted.  All seems well now.  I thought it had to be a software glitch, but had forgotten the two button reset protocol.
    All seems fine now!!  WHew!!

Maybe you are looking for

  • Install itunes with error -2096

    When I finish installing setup.exe and open itunes, there is a line that: Quicktime failed to initialize (error -2096).QuickTime is required to run iTunes. Please reinstall iTunes. I have reinstalled many times, but it still appears that line. So how

  • Convert PDF to XML Format . Can´t get it working :(

    Hi everybody, I am a Rocky in Acrobat Scriptingand I need some helpd to convert a PDF file into an XML format using the build in javascript console. The only thing I got so far is: this.saveAs("/e/test.xml","com.adobe.acrobat.xml-1-00") I got this in

  • Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]

    Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]  When I connect the phone he load and then says no connect

  • Dynamic scrap mapping in to SAP

    Hai All, I am having scenario like this... for finished product based on the order qty system should take different assembly srap percentage like. For order qty 0 to 100 it is 10%  , From 100 to 200 it is 20% , from above 200 it is 15% like this. Is

  • Can't close Sun-specifc settings dialog box

    Dear All, I cannot close the sun-specific settings dialog box when I attempt to create my mappings for my CMP entity beans from the Schema. Close button will not function. Also I can still go through to the Create Mappings window but it doesn't allow