HT4623 i hit update and its locked up

Went to update the 7.02 and it locked up onthe itunes screen Help!

http://support.apple.com/kb/HT1808

Similar Messages

  • HT4623 my daughter gave me her old iphone and its locked how can i unlock it without any minutes on it

    i have a iphone that my daughter gave me and its locked how do i unlock it with no minutes on it

    Ask her for the passcode  If she does not have or remember it restore it as new phone.  All data on it will be lost

  • I have Iphone 4 and its lock from at&t, but my contract is getting over in short time. And no longer i want to use this service. So after contract gets over its my right to get factory unlock my iphone 4. so help me

    I have Iphone 4 and its lock from at&t, but my contract is getting over in short time. And no longer i want to use this service. So after contract gets over its my right to get factory unlock my iphone 4.

    jatpri1730 wrote:
    I have Iphone 4 and its lock from at&t, but my contract is getting over in short time. And no longer i want to use this service. So after contract gets over its my right to get factory unlock my iphone 4.
    Unfortunately, AT&T does not provide unlocking.
    Stedman

  • HT5622 my ipod is 4th generation and i want to update it to ios7 but it says its updated and its only on ios6. what am i supposed to do to update it?

    my ipod is 4th generation and i want to update it ios7 but it says its updated and its only on ios6. What do i do to update it?

    well the ipod 4th gen sadly cannot be updated  to the ios7 because the software couldnt or wouldnt connect yhe only ipod that can get the ios 7 is ipod 5 sorry

  • I have Iphone 4 and its lock from at

    I have Iphone 4 and its lock from at&t, but my contract is getting over in short time. And no longer i want to use this service. So after contract gets over its my right to get factory unlock my iphone 4.

    " So after contract gets over its my right to get factory unlock my iphone 4."
    It is not a right at all.
    As provided, AT&T does not unlock iphones at all.

  • I turned my iphone off to update and its stuck in the update screen!

    I turned my iphone off to update and its stuck in the update screen its been 12 hours what can I do???

    IF ios 8 is not working properly in iphone 5.,!! Then i should not update my iphone 4s to ios 8..!! If i do so that will be blast hahahah

  • TS3694 sirmy iphone 3G was not on due to software update and its not resotre previous software and shown as error 1051 kindly resolve my issue as soon as possible

    sir my iphone 3G was not on due to software update and its not resotre previous software and shown as error 1051 kindly resolve my issue as soon as possible

    The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
    Triple-click anywhere in the line below on this page to select it:
    open -e /etc/hosts
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Paste into a Terminal window by pressing command-V. A TextEdit window should open. At the top of the window, you should see this:
    # Host Database
    # localhost is used to configure the loopback interface
    # when the system is booting.  Do not change this entry.
    127.0.0.1                              localhost
    255.255.255.255          broadcasthost
    ::1                                        localhost
    Below that, you may see some other lines. The first 9 lines should be exactly as above, apart from differences in the blank space within lines. Otherwise you can't use this procedure—STOP and ask for guidance.
    If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
    sudo sed -i~ '10,$d' /etc/hosts
    You may be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
    If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
    That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

  • I found a Jailbroken Ipod 4th Generation and its locked what do i do to setup default?

    I found a Jailbroken Ipod 4th Generation and its locked what do i do to setup default?

    You may be in possession of stolen property.
    Take the phone to an AT&T store and report that you found it.
    If anyone tries to register it, even with a current AT&T account, that they will not be able to since the account info is basically tied with the iphone Serial #, and IMEI #s.

  • HT201441 i cant find a way to contact my iphone previous owner and its locked i need help

    hi i cant find a way to contact my iphone previous owner and its locked i need help

    There is nothing anyone can do for you.
    You need the previous owners password to unlock the phone. If you can't get that, then your phone is useless.
    Nobody, not even Apple, can unlock it for you.

  • Dear sir i have i phone 4s model A-1387 EMC-2430 FCC ID;BCG-E2430A IC;579C-E2430A and its locked how can i unlock it even so i bought it of some body not knowing about it and i live now in Jordan

    Dear sir
    I have i phone 4s model A-1387 EMC-2430 FCC ID;BCG-E2430A IC;579C-E2430A and its locked how can i unlock it even so i bought it of some body not knowing about it and i live now in Jordan

    If you mean that the iPhone has Activation Lock - that is, it's asking for the previous owner's Apple ID and password to activate the device - then you will need that information, or you'll need to get the previous owner to remove the device from his/her iCloud account:
    http://support.apple.com/kb/PH2702
    If you can't reach the previous owner or he/she is unwilling to cooperate, then the device is unusable by you. Return the iPhone for a refund if you can.
    Regards.

  • HT201328 Hey, i bought an iphone from online shop and its locked by orange france, i contact them to unlock it but they refused, they said that we regret to inform you that we'r not able to unlock second hand phones? I need your help please.

    Hey, i bought an iphone from online shop as a used phone and its locked by orange france, i contact them to unlock it but they refused, they said that we regret to inform you that we'r not able to unlock second hand phones? I need your help please. Its not fair , apple should figure it out
    Regards,
    Orange

    This is no different with any carrier locked phone. Getting a carrier locked phone officially unlocked is the responsibility of the carrier, not the cell phone manufacturer. A cell phone manufacture cannot unlock a carrier locked phone without the carrier's authorization.
    An iPhone sold as officially unlocked when new can be used by others as a second hand phone, and the same with any carrier locked iPhone that can be unlocked by the carrier, and many carriers offer it.

  • I am updating my iPhone4s with the most recent OS7.3software update and its been almost 3 hrs now and it has not completed its update. It is still " verifying updated iPhone software. How long does it take for the update to be completed. Thanks

    i am updating my iPhone4s with the most recent OS software update and its been almost 3 hrs now and it has not completed its update. It is still " verifying updated iPhone software. How long does it take for the update to be completed. Thanks

    Well the term "hotlined" I have never heard before. In any case many states (like NY) just passed regulatory powers to the State Public Service Commission of which it may be called something different in your state. You could file a complaint with them. Or file a complaint with your state attorney generals office, they also take on wireless providers.
    The problem here is the staff you speak to are poorly trained, in days gone by it took one call to them and they pulled up your account and see the error and had the authority to remove any errors. They did not remove legitimate account actions, but used their heads instead of putting a customer off or worse lying to the customer.
    Its a shame you have to go through what you going through.
    Good Luck

  • Has any one figured out how to fix an issue I'm having. My iPhone 5 randomly shuts off by itself. Then it won't turn on when i try to hook it up to iTunes it says its in recovery mode. so then i hit restore and its been stuck on waiting for iPhone.

    This happened after I did a software update on my phone about a month and a half ago. My phone will randomly shut off by itself and wont come back on. I had spoke with an apple repair person over the phone who told me to hold in the home button and then plug it into my computer. When the iphone said that there was an error and gave him a code he suggested that I send it in. So I did and about a week and a half later I get it back and its on. Yet the problem still occurs. It shut off twice in the same day and for several hours would not come on. When it did I called apple again and they ran a diagnostic on my phone and said it was a software issue. So then why was it not fixed? They told me they could not duplicate the problem. And now it happens about once or twice a week now. And its happening right now. I have it plugged into my computer and the apple logo with a bar below it has been on for about 20 min now. And itunes is still saying "waiting for iphone." 

    Hello Elliiee,
    The steps detailed below can help stabilize your iPhone.
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • TS1363 my iphone has itunes symbol and usb symbol on screen and its locked

    i plugged my iphone4s to my laptop and it did the updates but never synced my phone. now my phone has an "itunes" emblem with an arrow and "usb" emlem and its stuck! how do i get rid of it and use my phone again?  this is the 2nd time its happened (over a month ago) and i forgot how i got rid of it.
    PLEASE HELP!!

    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...

  • HT4623 iOS 6 update and now my iPhone 4 doesn't work, any suggestions?

    I updated my iphone 4 to the new ios 6 and now it doesn't work. It keeps shutting off when I use the apps and try to make calls; when it does shut off I can't get it to turn on again as well. I have tried to hold the home button and the lock button simultaneously but that doesn't do anything. I have tried 3 times to restore it but I keep having the same issue. The power percentage does not increase either. I charged it all day yesterday and last night and it still reads 54%. It only stays on when it is plugged into the wall outlet, not to my computer as well. Can anyone help?

    Try going to Settings>Reset>Reset Network Settings.

Maybe you are looking for

  • Tuning a procedure and using dbms_job.submit proc that call's functions

    Hi I have Procedure that have 3 curosrs which are nested one below with in each other and it looks as below it's structure will look some thing look like this declare empno_fetch number; CURSOR deu_process IS SELECT empno FROM emp WHERE flg_process =

  • Help with creating a new document

    Hi, I will have to work on creating a new document from scratch which will serve as a billing statement to a customer. I have to construct it and I am really confused on how to structure my forms and subforms. Can any of you please point me to a righ

  • AVCHD Log and Transfer Tip

    Everyone may already know this but, while testing my new camera, I was delighted to discover how to speed up the ingestion process: first copy the AVCHD folder from the media volume to the desktop and then point your L&T Browser to that folder, not t

  • Text Updation failure in Purchase order creation

    Hi We are trying to update the PO Item Text Object in PO User Exit include ZXM06U44. In most cases, Text is updated into PO text correctly and sometimes, it doesnot. In particular if its PO's are created in batch mode. Have any one of you faced this

  • Error calling a VI

    Hi, The attached application is very simple. In VB I read a file of values and covert it to a numeric array. In VB I want to display this array. Why am I getting a mismatch error? Thanks Attachments: Display 10mhz.rar.zip ‏49 KB