HT4623 i kkep getting an error message on the ios 7 update

I keep getting an error message when im trying the update

I had the same. Just try over and over again for a good min then try and little later..
There are LOADS of people downloading at once thats why

Similar Messages

Ever since I downloaded Firefox 4 (and now Firefox 5), I get two error messages when the auto-update tries to run.

The two messages are as follows: "Something is preventing Firefox from updating securely. Please make sure that you have the latest version of Firefox from: http://www.firefox.com " and the second message, "Something is trying to trick Firefox into accepting an insecure update. Please contact your network provider and seek help." I have made sure that I have the newest version of Firefox, downloaded from cnet.com. Can anyone explain this problem?

Try to trash the current Firefox application and do a new installation.
* Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Help

I have two versions of Pr, one is the latest 2014 and when trying to open a Pr2014 session, I get an error message saying the project was saved in a newer version and cannot be opened. Could there be an issue with an older Pr application on the computer? Please help!

You need to be very careful which project you open in which version.
For 2014 make sure its on 2014.1 build 81.

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

I am unable to open a project that I have worked on and saved. I get an error message that the file is damaged and cannot be opened.

Leslie Tanaka
Travel and detours have kept me from following up sooner. If the problem that you wrote about still persists.....
Let us go back over that Adobe document regarding troubleshooting damaged projects.
3. Delete the Application Preferences
Where you able to follow that path and delete the Adobe Premiere Elements Prefs file at the end of the path? And, after you did, did the saved/closed programs still refuse to open? If you could not carry out this procedure, what were the limiting factors that kept you from do
7. Test to see if individual media files are causing the problem.
That is an important one. How far did you get into following the instructions given in the document? If you could not complete the test, what was the major block that prevented you from doing so?
I want to make sure that we have gone through everything in that document and ruled all factors there in or out. If it was a matter of you not understanding the instructions, I am hoping that the above will channel you questions to me so that I can clarify anything that you did not understand in the Adobe document instructions.
I do not recall if I asked previously. Even if you cannot open all your saved/closed projects, can you still open a new project and save/close it? Maybe even reopen it?
Please review and consider.
Thank you.
ATR

HT1926 I have just updated itunes on my pc (widows XP) to the latest version. When I try to open it i get an error message saying the application failed to start because MSVCR80.dll could not be found. Not sure how to resolve this. Have tried to reinstall

I have just updated itunes on my pc (windows XP) to the latest version. When I try to open it I get an error message saying the application failed to start because MSVCR80.dll was not found< Have tried reinstalling with no luck. Any ideas?

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

My ipod needs to be restore and I get a error message saying :ipod software update server coud not be contacted.

My ipod needs to be restore and I get a error message saying :ipod software update server coud not be contacted.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
Then tap Settings > General > Software Update
No data is lost due to a reset.

HT4993 i am trying to install msnbc app from the app store and keep getting an error message. The app will not install. What can i do?

i am trying to install msnbc app from the app store and keep getting an error message. The app will not install. What can i do?

This is asked and answered many times each day. The forum search bar is on the right side of this page.
Disable your firewall/security software and try again.

I get an error message saying "The iTunes Library.itl file cannot be found or created" when I try to open iTunes on my computer and the program fails to open. How can I fix this?

When I try ot open iTunes on my computer I get an error message stating "The iTunes Library.itl file cannot be found or created" and the program fails to open. How can I fix this issue?

Hi pgarard1,
If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
http://support.apple.com/kb/TS2363
Regards,
- Brenden

HT1349 When I click on a song in iTunes, I get an error message that the song could not be located. This just started happening. Why? And how can I fix this?

I have all of my songs on an external hard drive. It was working fine with iTunes; now when I click on a song, I get an error message that the song cannot be located. What happended and more importantly, how can I fix this?

Is this an iPad issue? Not sure where you are "clicking" or how you are accessing. A little more info would help.

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it...." How do I fix this?

I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel."
How do I fix this?

Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

I am using iPhoto version 9.6 and I can no longer get an email sent with a photo attached. I get an error message saying the email did not go through because the server did not reply. I can send the photo with Mail. Help!

I have upgraded to Yosemite and also updated the iPhoto application to version 9.6. I am no longer able to send a photo from iPhoto via email. I get an error message saying the server is not responding. But, when using the same server in Mail, I can attach the photo and send it. My wife is using the older version of iPhoto and it works fine.
I have checked the settings for the outgoing server, etc. and the Mail settings match those in iPhoto.
Could this be due to either the Yosemite upgrade or the iPhoto upgrade?

This solution is for those of you using 2-step verification for your Apple ID and are using iCloud as the mail server that you are trying to mail photos with.
I too had this issue. The problem in my case occurred because I had setup 2-step authentication for my Apple ID. If you have done this then you will get the error message "the mail server did not recognize your email/password...". To solve the problem go to:
https://appleid.apple.com
Click "Manage Your Apple ID"
Verify your identity with the device you selected (if this step does not show up then you have not likely set up 2-step authentication and this is not your solution)
Click Password and Security in the left column
Click Generate an app-specific password
Enter iPhoto as the name of the app
Copy the password and paste this into the password box in iPhoto where you would normally enter your apple ID (in the mail account section in iPhoto preferences).
And...voila' (I hope)

When selecting a song to play in iTunes, I get an error message indicating the song could not be used because the original file could not be found. Would you like to locate it. I have no idea where to look since the library hold all my files.

When selecting a song to play from iTunes library, I continually get an error message indicating the original file could not be found. Then asks, would you like to locate it? Does anyone know how to fix this? I'm not even able to play the songs I purchased due to this error message. Any ideas how to remedy this problem?
Thanks

It would help to have more background about your iTunes collection such as if you keep it on an external drive, or if you have moved or renamed anything recently. iTunes is very sensitive to you renaming or moving files or folders involved with your media. iTunes only keeps a reference to where a media file is located and then goes to look for it when you try to play it. If you have changed things since it was added to itunes then it's like me sending you to look for a friend in my addressbook but that friend has moved.
The other possibility is your computer is starting to lose files. Again, the computer uses a reference database to tell it where on the drive to look for a file. If that database gets corrupt then it starts losing files. Use Dsk Utility's first aid to verify your hard drive.

Updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

updated iTunes and now get an error message that the file iTunes Library.itl cannot be read because it was created by a newer version of iTunes. ??

hello!
i have a similiar problem:
i upgraded my mac from 10.6.8 to 10.7.something recently, but i did NOT update itunes, still running version 10.4.1. now i wanted to open itunes but it tells me, that my iTunes Library.itl was created by a newer version of iTunes - which i never used!
its annoying since i dont want to be forced to download a 720MB pckage of itunes every month - even more so, if the system start "lying" to me.
or is it another problem? anyone got the same? any solution? maybe an erratic prompt?
thanks, florian

HT1386 I've updated my 2007 MacBook to 10.6.8, and now my iPhone 3 (used as iPod) and iPhone 4 aren't recognized to be synced anymore or I get an error message telling me to update my phone to 11.1 or something. When I do that is appears to update and whe

I've updated my 2007 MacBook to 10.6.8, and now my iPhone 3 (used as iPod) and iPhone 4 aren't recognized to be synced anymore or I get an error message telling me to update my phone to 11.1 or something. When I do that is appears to update and when finished nothing appears to have updated.

It is possible one of the 10.6.8 updates may help:
Combo v1.1 (7/25/2011), 10.6.8 2013 Security Update 004, 2013-005 Java update.
Note, your machine is too old to use the latest Java from http://www.java.com/

HT4623 i kkep getting an error message on the ios 7 update

Similar Messages

Maybe you are looking for