HT4623 I'm trying to update IOS on my iphone 4 which has the version 4.2.6 the direction in this article is version 5?
i'm trying to update IOS on my iPhone 4 which is at version 4.2.6
From this article: http://support.apple.com/kb/HT4623?viewlocale=en_US&locale=en_US scroll down to the "Update our device using iTunes" section.
Similar Messages
-
HT4623 I'm trying to update iOS on my iPad.
I'm trying to update iOS on my iPad. I don't have the software update option
That's because you need iOS 5.0 to get the Software Update option.
Connect to iTunes. -
I AM TRYING TO UPDATE MY IPHONE4 AND WHEN I GO INTO THE SOFTWARE UPDATE IT WONT LOAD ANYTHING. IT JUST SAYS CHECKING FOR UPDATE
The update servers are still under pretty heavy load, so it's possible it's nothing on your end. Are you trying to do it over the air or through iTunes?
= L.I. -
HT4623 I am trying to update my phone, but it is stuck on the terms...
I am trying to update my phone, but it is stuck on terms and conditions. I press agree and it just stays on that page no matter what I do.
Any suggestions?Hi, Yvonzabeth.
I would recommend trying the steps in the article below.
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Once these steps are processed, attempt to accept the terms and conditions.
Cheers,
Jason H. -
I am trying to update my Iphone and it is stuck on the page that says RESCUE EMAIL. It won't let me hit next?!
Payment problem
1. Check if your form of payment is acceptable
http://support.apple.com/kb/HT5552
2. Check credit card number
3. Check security code
4. Billing Address must be the same as credit card
5. Check expiry date
6. Make sure you have sufficient fund -
ios 8 update in ipad air, went to recovery mode. Can't open it now!!!
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
i was trying to update ios and after i was complete i can not do anything with my phone now it just shows the charger with an arrow pointing to the itunes symbol,
i cant get out of that, what can i do?Most likely it is showing an cable connecting to an iTunes symbol which indicates the device is in recovery mode.
Connect the device to a computer running iTunes and restore. -
im trying to update IOS version, have done everything as recommended. however, it doesnt seem to be working, when i try to buy a tune i am again prompted to update to new IOS version... can anyone offer any advice
Is this an iPhone or iPad question? You posted in the iPad forum.
See
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
I have never updated ios on my iPhone 4. I am currently running ios 4. I tried to update yesterday to ios 6 but many hours into the backup I got an error message saying that continuing would cause all of my phone contents to be lost. What should I do?
Why, if it told you you have insufficient space on your computer, would it suggest making more space available on your phone?
At a guess, you have insufficient space on your phone. Installing software will typically require more space than the final size of the software, perhaps even twice or three times as much, for the installation process. You can easily dump some videos or music temporarily, and then synch them back in afterwards. -
I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS, unfortunately I don't have my iphone backup too.
we have a same problem
-
I'm trying to update iOS 7 and it says I need 3.4 GB of storage to update.. I currently have on my storage 797 MB and 12,6 GB used. How much storage should it write for me to be able to update?
If your ipad has only 797 MB free and it tells you that you need 3.4 GB to update, then you need to begin deleing files, whatever it takes to free up space.
Consider...
Delete apps you don't use.
Delete videos you don't want (these take up a lot of space).
Do you have a lot of emails stored on the device?
Are there apps that store data files, like a PDF reader? If there are a lot of these, you need to delete some.
The bottom line is that you need to remove data and/or apps on your device to make more storage available.
But for videos and photos, always sync them to a computer first to archive them. -
my ipod touch 5 wount let me back in after trying to update ios with my computer and now says connect to itunes. it still wount work when i plug it in and click restore for it?
it went through the extracting software stage but then an error message saying that it encountered problems came up and it didn't restore.
-
My ipod touch 5th generation went into recovery mode when I tried to update ios. When I try to recover it just keeps looping back to recovery mode. I tried to hold the power button for 3 secs. then simultaneously hold the home button for 10 secs. then hold only power button for 20 secs. I tried this several times to no avail. This is my daughter's ipod. I am computer illiterate and I'm not sure what else to try.
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Just tried to update iOS on iPad 3 and it is totally locked up. How can I restart?
Tried to update iOS and the iPad is stuck on the Apple logo with the status bar at about 90%. It will not even turn off with the power button. How can I restart it?
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally. -
My Iphone 4S got broken and need to use old Iphone 3G.
I want to update IOS 4.2.1 on Iphone 3G to IOS 5 by using Itune. Itune said that IOS 4.2.1 is the latest. How can I update IOS 5 or later on Iphone3g?The iPhone 3G can not run anything higher than 4.2.1. It's obsolete.
Maybe you are looking for
-
hi i want to know if anyone has experimented with streaming using ethernet on a PXI(e) platform? i want to stream from a 100 Msps PXI digitizer to a non-pxi PC? what are the issues at hand...? currently my system is windows XP, ethernet gigabit on a
-
When bookmarking a page, I can't get the complete list of bookmark folders to drop down in order to select any folder in which to bookmark page. The 'Folder:' bar has 'Bookmarks Menu' showing. The arrow on the bar drops down 5 recent folders to which
-
i'am using ACS and cisco 3600 to perform wireless mobility using GPRS. now i'm having a problem when one of my GPRS scanner (Fujitsu) can't access to ACS using EAP. that GPRS scanner must used PAP to access to ACS. But, my other GPRS Scanner (Symbol)
-
Connect dispatchevent between two swf's??
One single swf, imgdesc.swf is being loaded into the emptymcholder, by the moviecliploader instance. My order is folioholdermc ---holds--> emptymcholder --holds--> imgdesc.swf Within folioholdermc, I disabled buttons and lowered opacity, once imgdesc
-
Nightly build users can't use the feedback feature
Ever since I've started using Firefox beta (around beta 4, I think), I've been unable to submit feedbacks using the gigantic button that have only been waiting for some love. However, it just keeps saying that my firefox version of Firefox is too old