HT4623 I'm trying to update my iPad to ios5, I have gone thru Settings, General, but there is no update button available...what am I doing wrong?
I'm trying to update my iPad to ios5, as I want Sky Go on it to watch the cricket, so I've gone thru Settings, General, but there is no update available...what am I doing wrong? Or is this iPad not able to get updates? Thanks
You only have the option if you are already running iOS 5. If you are trying to update the iOS, you have to use iTunes on a computer to update the iPad.
There are some important things that you should know before you update.
http://support.apple.com/kb/ht4972
The updating instructions are in this article. Make sure you read the part about using iTunes.
http://support.apple.com/kb/HT4623
Similar Messages
-
Any help in updating my I pad would be greatly appreciate,
Connect to your computer and upgrade with iTunes
Allan -
I have IPad 1 and for some of my game Apps, I need at least IOS 4.3. I open my IPad to Settings, General, but there is no "update" to select..should I call Apple Tech to have my IPad updated???thanks
The Settings > General > Software Update option only appears when you have iOS 5+ installed, you will need to update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Devices > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad via File > Devices > Back Up
Then start the update by selecting the iPad on the left-hand sidebar, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
You can only update a device to the highest iOS version that it supports, which for a first gen iPad is iOS 5.1.1 -
My IPAD software update is avail for the iOS 7.0.3 I keep trying to install it. I have my IPAD hooked up to my MAC and the Wi FI, I have internet open It keeps telling me not connected to internet. What am I doing wrong.
You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
Try again to see if the problem persists. -
I'm trying to update my software, but i can't find where to do it. i go to settings>general but there's no option to update my software. how do i then update my software?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
When I turn on my iPad the grey 'brightness slider' is in the centre of the screen and I can't get rid of it. I've tried switching on / off 'auto-brightness' in 'settings' but it won't go away. What am I doing wrong? Any advice gratefully received.
That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive (CD/DVD drive) and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
I am trying to print redplum coupons and I can't, help. I have updated java, adobe flash, and made sure my printer was set on default. I am not sure what I am doing wrong. I have contacted redplum and no one will help.
No Apple response??? Redplum/Valassis will not help either. I searched, using the cups error message and though it is Unbuntu, same error so maybe useful...only problem: details would not display unless I join Unbuntu forum. What a pain to do anything with my Mac or find any help. I honestly regret buying this buggy OS.
Anyway, here is what I found, FYI:
http://ubuntuforums.org/showthread.php?t=483415
As the old saying goes: when in doubt, consult the manual. The problem appears to be that I added the printer using the KDE Add Printer Wizard. It was automatically given a "socket" URI instead of an "lpd" one. When I:
- altered the printer settings at http://localhost:631 (the CUPS admin page) as instructed in the manual for the printer, and
- copied the PPD file into a second place on the hard drive (as instructed on ubunutuforums, see the link above)
..everything started working.
It's still slower than windows, but I can live with that
Probably a simple fix. Change the socket I.P. to match the printer I.P. like this:
socket://192.168.1.86:9100. The thing I'm concerned with using socket:// is that AFAIK the printer I.P. must not change. In my case I'm able to assign a static I.P. address to the printer but it's something to consider.
I found that the only thing I needed to do was change socket to lpd (and remove :9100 off the end as well). See Solving Ubuntu printer broken pipe problem (DocuPrint C525A) . BTW thanks for steering me in the right direction - very grateful.
Solving Ubuntu printer “broken pipe” problem (DocuPrint C525A)
Posted on November 25, 2008
Are you having a problem with your printer under the latest versions of Ubuntu (perhaps it worked under an older version)? Are you able to print short documents, but not longer, or more graphics-intensive, documents? (e.g. the unfortunate people at http://ubuntuforums.org/showthread.php?t=625493). Do they sit there as Processing for ages and then switch to Held? If you have the same problem I had the solution I tried may work for you too. Firstly, check your cups error log:
sudo gedit /var/log/cups/error_log
If you see anything like the following, the solution may be simple:
[Job 201] Unable to write print data: Broken pipe
PID 13359 (/usr/lib/cups/backend/socket) stopped with status 1!
System > Administration > Printing and right click on your printer, selecting Properties. Settings > Device URI
If you see something like socket://your_printer_ip_address:9100 just change socket to lpd and remove the :9100 off the end. Then click on apply.
Apparently lpd is a more modern protocol which works with most printers whereas socket is more raw (and potentially faster but riskier in a network situation). Somewhere along the line, the default Ubuntu/Gnome setup for networked printers shifted from lpd to socket. Some primitive printers will have benefited whereas a larger number of more modern printers will have suffered.
Please correct me if I am wrong (which is highly possible) but the underlying problem could be that socket may make the printer wait a long time for a large file to be processed ready for printing. Some printers, such as the Fuji Xerox DocuPrint C525A, may drop the socket if things take too long to start coming through.
Changing timeout settings might work but lpd is better than socket so it is the preferred solution in any case.
If this works for you, please leave a comment to let others know (ideally with a description of the printer and Ubuntu version). Printer may be relevant if it doesn’t support the direct stream protocol properly. NB I may take a while to let your comment through because of the volume of spam. Sorry about that.
Finally, thanks to sphilli8 for the steer in the right direction at http://ubuntuforums.org/showthread.php?p=6245626.
http://ubuntuforums.org/showthread.php?t=483415 -
I got a new Ipad 2 and I am trying to get it work in vain. I have downloaded the iTunes on my PC, but even after executing the program nothing happens to the IPAD. I still get the image of the USB cable and the iTunes logo. What am I doing wrong?
You know that you have to connect the iPad to your PC with the cable that came with it - and then iTunes should start automatically and it will guide you through the set up process?
If you have already tried to connect the iPad - and you have launched iTunes - and you still have no luck - reboot your PC and then begin the process again. -
I am trying to connect with a friend via FaceTime from my IPad to his IPhone and it will not connect. We are both on wifi. What are we doing wrong?
Read this:
There is a troubleshooting section at bottom.
http://support.apple.com/kb/TS5419 -
HT4623 on my 3G I go to settings, general but there is no software update ? how to update ?
on my 3G I go to settings, general but the is not a "software update " how to update ?
You only needed to ask this one time. The iPhone 3G can only be upgraded to version 4.2.1 which does not have the ability to do an over-the-air update. You will never see software update in settings on that iPhone.
-
I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... I have selected every possible security/password encryption level... What am I doing wrong? If it os possible where can I find step by step instructions? Please & Thank you!
The challenge with the older round AirPort Extremes are that they are "g" wireless devices.
When you configure them for WDS, the speed on the wireless network is cut in half...and probably will not have the bandwidth required to stream video reliably from either AirPort Extreme since both are affected by the WDS setup.
There is not an "automated" setup for WDS. You have to do this manually on both AirPort Extremes. Unfortunately, it is not an easy configuration and it's easy to make a mistake and hard to recover without starting all over again.
Apple's instructions for WDS are here if you want to give it a try.
http://support.apple.com/kb/HT4262
It is possible that it might work. Keep us posted on your progress
Adding a single AirPort Express will unfortunately not help. You have to have "n" wireless devices at all router points. -
I am currently try to download music from Rhapsody to my daughter Ipod Touch 4th Generation. I have made the Apple ID: and went through the whole thing, but once the Ipod is plugged into my computer it doesn't show up in my media. What am I doing wrong?
You have to import the music into your iTunes library and then sync it to your iPod
iTunes 11 for Windows: Syncing overview
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
iOS and iPod: Syncing photos using iTunes -
I am trying to update my new iphon 4.at first i got a massege no.14. then i updated apple &tried again but this time got a massege no iphon found. serial no.appears but not a phone no.what should i do?
Sounds like it's hardware issue. The iPhone warranty is based in the original country of purchase. Since it was bought in Korea you will need to ship the phone to someone you know in Korea to be taken in and then they will have to ship it back to you. The cost of shipping will be at your expense.
-
I only bought the Ipad 2 yesterday, and as of yet have been unsuccessful with connecting the Ipad to the internet. I have followed all of the instructions provided and have contacted both the provider of the Ipad and my internet service, all to no avail! The Ipad shows that it is connected to the wi-fi but on checking the details on the selected IP address the number begins with 169 (I understand that this could be the problem) however when you ask for "renew lease" it doesn't change the number. The Ipad is also not picking up any of the router details. Hope I've provided enough info for any help!
The problem could be due to your router or your iPad. To isolate the problem test your iPad on some other networks.
If it has problems on other networks your iPad probably has a problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the iPad problem. If that does not help your iPad may need repair/replacement. Contact Apple to resolve.
If the iPad does not have problems on other networks the problem may be in your router. You could try restarting your router (remove power to it for 30 seconds and restart) to see if that helps, however, there could be a firmware problem in your router. Check the manufacturer's support Web page to obtain the latest firmware for your router.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.
See also http://support.apple.com/kb/TS1398 -
I am logged in with my profile. And when I go into app store to download something, I can see the app but it does not give me an option to download. ALSO if I try open an app that is already loaded onto my devices, it opens for a split second and then shuts down. PLEASE HELP!
1. Settings > iTunes & App Store > Apple ID: > Sign out
2. Do a Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
3. Signin again.
Maybe you are looking for
-
Pdf sync across devices does not work
is anyone experiencing problems with syncing PDF files across devices? My PDFs are not the same across the 3 devices I use.
-
Dear All, May, can you tell what is the basis of debtor Aging Analysis. Wether, it is the posting date or document date which is considered while reporting? More information will also be helpful. Thanks VK
-
Not long time ago I was trying to send an email from within Forte using SMTP. And believe it or not it works just fine. From what I can tell, Keith, you know the steps to send it, but missingfew concepts in how the SMTP works. It is simple, but not t
-
Show focus on the checkboxes when tabbing
Hi, I have several af:selectBooleanCheckbox components on one form and would like to see that a checkbox are on focused as I tab through the fields. Firefox does show that the checkboxes are on fucused but IE does not. Does anyone know how get this t
-
Whenever I import new photos, it puts them into a project, a uses the current date as the title of project. But then it throws that project into some random order in the list of all my projects. Shouldn't Aperture sort the projects by date, or alphab