HT4623 I'm trying to update my iPhone and I go to ``settings'' then ``general'' and at that point I should see ``software update.'' But it's simply not there, that line does not exist in my phone. What can I do?to look for the
I'm trying to update my iPhone and I go to ``settings'' then ``general'' and at that point I should see ``software update.'' But it's simply not there, that line does not exist in my phone. What can I do?
This featue is only available on iphone running ios 5 or later.
Update as you always have, via itunes.
Read the article you linked. the entire article, not just the first part.
iOS: How to update your iPhone, iPad, or iPod touch
Similar Messages
-
i tray to update my iphone but refused to update iOS 6.and give me note there is problem in dawn loud . please tell me what can i do?dawn loud
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
When I open Firefox , and go to AOL.com it goes to the home page with a message to up grade. I have tried that it tells me I can not do it on my operating system MAC 10.4. Now when I sign on to Aol to use my favorites some time it lets me on, but if i write something e-mail or such it sends it them tells me error message Offline mode check off in file which I do, but it shuts down the internet. I cannot get back on.
You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money.. -
Cant turn The Voice over off!
From the User Manual:
Turn VoiceOver on or off: Go to Settings > General > Accessibility > VoiceOver. You can also set Triple-click Home to turn VoiceOver on or off. -
My iPad locked after 1 incorrect passcode entry and I tried what a senior advisor told my to do, but it could not download the info unless I entered the correct pass code, which I can not do since it does not give me the opportunity. How do I get the window to enter my pass code?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Photoshop CC: When I'm trying to draw a rectangle I can't fill it or create a stoke because there is a message telling me; "Could not complete your request because of a program error. What can I do?
It is a mute point now. PSE12 finally failed to the point it locked up the MAC. I had to restore the MAC OS from backup to a point before the PSE12 update.
The MAC now operates correctly and so does PSE12. I don't think I'll be updating PSE any time soon. -
what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil" I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
Thanks for any helpZachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever. -
The server network address can not be reached or does not exist
Hi all
When i am trying to configure Mirroring .i am getting the below error.
The server network address "TCP://RDEEPA:5022" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)
. TCP/IP and Name pipe connection is enabled in both principle and mirror server configuration.
I post the complete error message below ,which is in red
TITLE: Database Properties
An error occurred while starting mirroring.
ADDITIONAL INFORMATION:
Alter failed for Database 'success'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Alter+Database&LinkId=20476
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
The server network address "TCP://RDEEPA:5022" can not be reached or does not exist. Check the network address name and reissue the command. (Microsoft SQL Server, Error: 1418)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=1418&LinkId=20476
BUTTONS:
OKHi,
I have the same problem. However beginning over and over again and using other ports did not solve this unfortunately.
Here is the SQL I used to setup the mirroring.
* Principal DB
CREATE ENDPOINT [MirroringEndpoint]
AUTHORIZATION [DOMAIN\administrator]
STATE=STARTED
AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
FOR DATA_MIRRORING (ROLE = PARTNER, AUTHENTICATION = WINDOWS NEGOTIATE
, ENCRYPTION = REQUIRED ALGORITHM RC4)
BACKUP DATABASE TEST
TO DISK = 'C:\full-backup.bak'
WITH FORMAT
BACKUP LOG TEST
TO DISK = 'C:\log.bak'
ALTER DATABASE TEST SET PARTNER ='tcp://sql2.domain.local:5022';
* Mirroring DB
CREATE ENDPOINT [MirroringEndpoint]
AUTHORIZATION [DOMAIN\administrator]
STATE=STARTED
AS TCP (LISTENER_PORT = 5022, LISTENER_IP = ALL)
FOR DATA_MIRRORING (ROLE = PARTNER, AUTHENTICATION = WINDOWS NEGOTIATE
, ENCRYPTION = REQUIRED ALGORITHM RC4)
RESTORE DATABASE TEST
FROM DISK = 'C:\full-backup.bak'
WITH NORECOVERY
RESTORE LOG TEST
FROM DISK = 'C:\log.bak'
WITH FILE=1, NORECOVERY
ALTER DATABASE TEST SET PARTNER ='tcp://sql1.domain.local:5022';
The last statement on the principal server gives me the following error :
Msg 1418, Level 16, State 1, Line 1
The server network address "tcp://sql2.domain.local:5022" can not be reached or does not exist. Check the network address name and that the ports for the local and remote endpoints are operational.
From the principal server I'm able to ping the mirror server and can establish a telnet connection. When the statement gets executed even netstat gives me the following output :
TCP 0.0.0.0:5022 0.0.0.0:0 LISTENING 1244 [sqlservr.exe]
TCP 10.1.1.140:5022 10.1.1.110:1223 TIME_WAIT 0
TCP 10.1.1.140:5022 10.1.1.110:1226 TIME_WAIT 0
TCP 10.1.1.140:5022 10.1.1.110:1216 TIME_WAIT 0
TCP 10.1.1.140:5022 10.1.1.110:1218 TIME_WAIT 0
TCP 10.1.1.140:5022 10.1.1.110:1225 TIME_WAIT 0
TCP 10.1.1.140:5022 10.1.1.110:1222 TIME_WAIT 0
TCP 10.1.1.140:5022 10.1.1.110:1221 TIME_WAIT 0
TCP 10.1.1.140:5022 10.1.1.110:1224 TIME_WAIT 0
TCP 10.1.1.140:5022 10.1.1.110:1219 TIME_WAIT 0
TCP 10.1.1.140:5022 10.1.1.110:1220 TIME_WAIT 0
Is it normal so many ports get opened?
Any help would be greatly appreciated (as this drives me crazy :-( )
Found the problem eventually. The mirroring ran as the NT_AUTORITY user instead of DOMAIN\administrator. -
If i go to general and look for the software update button, there is not one on my ipad2. What do i do then?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. For the iPad Mini the iOS is 6.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
I have a Macpro Book and I just downloaded new software to my ipod touch(3rd gen). Now it does not show up in itunes nor does it turn on. I believe it just downloaded the software and never updated it. What do I do?
You appear to have a second generation iPod touch, not a third, and those can't be updated past 4.2.1. Apple sold 8GB second generation models at the same time as the third generation ones.
(70782) -
ERROR: file can not be accessed or does not exist
I have a client online at this very moment that just went on and did all their page edits... about 2 hours of work for him.
He went to save the file & received the error "...file can not be accessed or does not exist, Error" (no error number or anything. Here are the steps he took:
Edit page
Save ... received error
Done... received same error
Call me in panic
Anyone???Hello Tommy,
The editing session should not time out for 24 hours for a normal login. The period is even longer if “remember me” was checked at login... And if the session timed out, you should have been prompted with the login dialog, not thrown an error.
I've sent you a private message regarding further troubleshooting.
Best regards,
Corey -
My iPod does not turn on and it is not recognized by my laptop in iTunes... What can I do?
My iPod does not turn on and it is not recognized by my laptop in iTunes... What can I do?
Model iPod 2 Touch, 8G, It stoped working less than a month after it was purchased but I never sent it back for repairs or warranty to Apple.. Is there still a way to repair it on my own. It just simply does not turn on or charge and it is not recognized by iTunes when I plug it in to my MacBook Pro.
Please advise...Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The appointment is free.
Apple Retail Store - Genius Bar -
My iphone4s does not turn on,when I connect to power ,it shows the message "connect to itunes" but when I connect to iTunes,my pc does not detect my phone,so iTunes does not detect my iPhone.
Are you running the most recent version of iTunes for Windows on your PC? You may be running an older version that is incompatible with the 4s.
Hope this helps -
previously used overdrive media console to download audio books now i get an error message when trying to sync to iphone 4 after upgrading to 10.5 itunes and 5.0 on iphone unable to download audiobook states cannot play on iphone and does not convert
previously used overdrive media console to download audio books now i get an error message when trying to sync to iphone 4 after upgrading to 10.5 itunes and 5.0 on iphone unable to download audiobook states cannot play on iphone and does not convert
-
I downloaded the IOS7 and I recently started seeing that every tim I revived a message everyone would be able to see it, I tired looking for the I'm not sure what to call it in messages, where no one can read my messages unless I open my phone. Any help? I really don't want anyone ready what I get from other people, its emrassing, when I get a text from someone and it's personal, and someone could go look at my phone while its charging and read the message. Please help!!!! How do I disable it, If I can.
Hello KenyaJohn,
You may benefit from disabling Show on Lock Screen for Messages and Mail in Settings -> Notification Center -> Mail/Messages.
You can disable Show on Lock Screen for a particular app in Settings > Notification Center > <app name>.
iOS: Understanding notifications
http://support.apple.com/kb/HT3576
Cheers,
Allen
Maybe you are looking for
-
I recently got a new iphone but when I restored it in iTunes one of my games that I have played for months RESET. How do I get my old game info back?
-
I'm using the interface (Firmware V1.24) on a D-Link DPR-1260 Print Server, connected to an Epson Printer/Scanner. When I hit the "Scan" button, I get an "uncaught exception" error. This firmware has been working for years (at least back to Firefox 3
-
Gmail in Apple Mail 4 (Snow Leopard)
Having major problems setting up my Gmail account in Apple Mail 4 on my new Mac Book Pro Snow Leopard OS. It just won't connect to the Gmail server. Anyone else having this problem? Anyone know a way round it?
-
Importing XI Content for MDM Business or MDM Business Content 5.5 SCV to IR
Hi All, I'm required to create a CRM->XI->MDM using the provided MDM 5.5 SP05 - Business Content - Business Partner in the. marketplace. From the pdf files that i have read, I understand that i would have to import SAP ABA 7.0, and MDM Business Conte
-
How to configure Tooltips for Project Gantt charts
Hi, I am trying to Display the title of the task as a tooltip for the Project Gantt Chart. I referred the documentation link and am trying to configure tooltipKeyLabels and tooltipKeys as specified in the link http://download.oracle.com/docs/cd/E1457