HT4623 I need update help!!!
I have ios 5.1 & I'm connected to wifi and my iPad doesn't pick up an update. My cord will not connect it to my computer what do I do now?
The original iPad does not have the hardware capability to run the latest versions of the iOS.
The highest version of iOS that the original iPad can run is iOS 5.1.1
Similar Messages
-
I was shared my photos with my other iphones and Ipad, now I need it to be privacy so I tried to switch it off and delete it but there are no way to delete these stream pics!!
I tried from Icloud as well and nothing these to help
COuld you let me know what is the best fast way to cancel these stream Pics from my Iphone and will be appreicating that.
and I have iphone 5 after making the update to 6.1 version its keep giving me No service and I tried to switch off and on it works then again coming same problem!!
regards
QasemPlease disregard this question. I'll submit a shorter and more direct question. Thanks.
-
HT4623 Problem downloading update - help!
Every time I try to download the latest update through iTunes, it stops about 20-35% of the way through. This has been going on for the last ~8 months, but now it's more important because my phone needs to be restored to function again. There is no apparent problem with my connection, and I have downloaded files of similar size very recently. Is there a mirror I could download the update from and/or a way to fix this issue? Please help so I can have a working phone again!
The original iPad does not have the hardware capability to run the latest versions of the iOS.
The highest version of iOS that the original iPad can run is iOS 5.1.1 -
Need updating help for nokia n78
hey im trying to update my nokia n78 but when the installation begins
it says internal module error. what should i do?
thnxFix is here.
/discussions/board/message?board.id=swupdate&message.id=8873
Search box is useful sometimes ;-) -
How i fix and software update i was tried but cant i need your help please and thanks.
"but cant"
That doesnt tell us anything useful. You need to post EXACTLY what you did and EXACTLY what happened, including any error messages. -
HT4943 Newsstand shows a 1 but I can't figure out which magazine needs updating...help!
Newsstand shows a "1" but I can't figure out which magazine needs updating. Help?
I have no idea why you are doing what you are doing so I will make a couple of related points.
1. Put your table partition, and its indexes, into a single tablespace and leave them there. If you do not understand why there has been volumes written on the subject by everyone from Tom Kyte, Jonathan Lewis, Richard Foote, etc. Essentially the entire membership of the Oak Table Network has weighed in on this one.
2. If you are going to create partitioned indexes leverage the built-in capabilities in DBMS_PCLXUTIL.
http://www.morganslibrary.org/reference/dbms_pclxutil.html -
I am going around in circles trying to establish my original Administrator's name and password so that I can install much needed updates.
I have my User ID and password. Advice please!Yet another update,
So I got an email back earlier from complaints as i said in previous post, as soon as i got back home from work I called it. Spoke to the first person who put me through to Options, again I told them my problems and they looked through my notes and told me that they couldn't help and transfered me to another department. I then went through all my issues yet again and again was told I needed to be transfered to another department to downgrade. I got put through to Options (where i'd previously been transfered from) this time I got told that they could downgrade me but need to speak to a different person in Options, so again transfered to someone else. This time they said that they will do it, started giving me the details of the new package and was just about to give me a date when they said that because of a technical issue with the way my account was set up they could not continue. Was then told that the order will be handed to the offline team and will be contacted (no time scale given). So annoyed right now!!!!! -
Need a help on Update statement
Hi All,
I Need a help in updating a table column. PFB my requirement.
Table1
ItemID OrgId Date
1 82 12/sep/2012
2 82 25/oct/2012
3 82 17/Nov/2012
4 82 22/Jan/2013
5 82 26/sep/2012
Table2
Itemid orgid Date1
1 82 23/sep/2012
2 82 25/Dec/2012
3 82 17/Sep/2012
4 82 22/Feb/2013
5 82 26/Oct/2012
Table3
Itemid orgid Date3
1 82 10/sep/2012
7 82 30/Dec/2012
3 82 12/Sep/2012
10 82 27/Feb/2013
5 82 29/Oct/2012
I Need to Update Date column of Table1 With Date3 of table3
If
Item and org combination is present in table3 and date column of table1 is less than Date3 of table3
Else
I need to Update with date2 of table2.Can we acheive this in a single update statement, can any one help me on this.
Thanks and regards,
Rakesh
Edited by: Venkat Rakesh on Sep 27, 2012 11:04 PMYou can probably also use MERGE:
--DROP TABLE table1;
--DROP TABLE table2;
--DROP TABLE table3;
ALTER SESSION SET nls_language = 'AMERICAN';
CREATE TABLE table1
itemid CHAR (1),
orgid CHAR (2),
thedate DATE
INSERT INTO table1 SELECT '1', '82', TO_DATE ('10/sep/2011', 'dd/mon/yyyy') FROM DUAL;
INSERT INTO table1 SELECT '2', '82', TO_DATE ('10/oct/2011', 'dd/mon/yyyy') FROM DUAL;
INSERT INTO table1 SELECT '3', '82', TO_DATE ('10/nov/2011', 'dd/mon/yyyy') FROM DUAL;
INSERT INTO table1 SELECT '4', '82', TO_DATE ('10/jan/2011', 'dd/mon/yyyy') FROM DUAL;
INSERT INTO table1 SELECT '5', '82', TO_DATE ('10/sep/2011', 'dd/mon/yyyy') FROM DUAL;-- won't be updated
CREATE TABLE table2
itemid CHAR (1),
orgid CHAR (2),
thedate DATE
INSERT INTO table2 SELECT '1', '82', TO_DATE ('01/sep/2012', 'dd/mon/yyyy') FROM DUAL;
INSERT INTO table2 SELECT '2', '82', TO_DATE ('01/dec/2012', 'dd/mon/yyyy') FROM DUAL;
INSERT INTO table2 SELECT '3', '82', TO_DATE ('01/sep/2012', 'dd/mon/yyyy') FROM DUAL;
INSERT INTO table2 SELECT '4', '82', TO_DATE ('01/feb/2012', 'dd/mon/yyyy') FROM DUAL;
CREATE TABLE table3
itemid CHAR (1),
orgid CHAR (2),
thedate DATE
INSERT INTO table3 SELECT '2', '82', TO_DATE ('30/dec/2009', 'dd/mon/yyyy') FROM DUAL; -- date less than table1, so picks from table2
INSERT INTO table3 SELECT '4', '82', TO_DATE ('30/mar/2013', 'dd/mon/yyyy') FROM DUAL; -- larger than table1 , so pick this date
-- table1 original data
SELECT * FROM table1;
-- merge new data
MERGE INTO table1
USING (SELECT NVL (t1.itemid, t2.itemid) itemid,
NVL (t1.orgid, t2.orgid) orgid,
t2.thedate prefdate ,
t1.thedate nextdate
FROM table2 t1
FULL OUTER JOIN
table3 t2
ON t1.itemid = t2.itemid AND t1.orgid = t2.orgid) dat
ON (dat.itemid = table1.itemid AND dat.orgid = table1.orgid)
WHEN MATCHED
THEN
UPDATE SET table1.thedate = (case when prefdate > table1.thedate then prefdate else nextdate end) ;
--table1 updated data
SELECT * FROM table1;OUTPUT:
Session altered.
Table created.
1 row created.
1 row created.
1 row created.
1 row created.
1 row created.
Table created.
1 row created.
1 row created.
1 row created.
1 row created.
Table created.
1 row created.
1 row created.
ITEMID ORGID THEDATE
1 82 10.09.2011
2 82 10.10.2011
3 82 10.11.2011
4 82 10.01.2011
5 82 10.09.2011
5 rows selected.
4 rows merged.
ITEMID ORGID THEDATE
1 82 01.09.2012
2 82 01.12.2012
3 82 01.09.2012
4 82 30.03.2013
5 82 10.09.2011
5 rows selected. -
Need some help! My iPhone 4 cannot play music through it's built in speaker, only with headphones. I also cannot adjust volume, it only shows "ringer". I really do not know when it starts. I already clean the jack and dock,reset it and still cannot be fixed. I updated it to IOS 7.1.1 recently only, does it have connection with the inconvenience I am experiencing right now? What should I do? Thanks!
Hi Melomane1024,
If you are still having issues with your iPhone’s speaker, you may want to look at the steps in this article -
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Thanks for using Apple Support Communities.
Best,
Brett L -
recently updated my iphone 4s software. now it won't sync w/ itunes, says i need updated itunes. i updated itunes... now it says that my desktop software is old and can't run new itunes. Yet, i cant update my computer either. PLEASE HELP!!!! UGHH
Why can't you update your computer operating system ("desktop software")? What software would that be?
-
please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins restoring but then it shows unknown error 1015
Stop being impatient.
From the article that the question was posted from:
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
You cannot downgrade.
If you have a 3GS, you can only install iOS 6.1.3 which is the current version of iOS for the device. -
I NEED SOME HELP WITH UPDATING MY IPOD TOUCH PLEASE
i need some help with my ipod the version is 3.1.3 and every time I'm trying to update it says it can not be restored then it says unknown error so i need some help updating my ipod to version 4.2
If you mean you're trying to update your ios go to settings/general/software update. then you should see the latest ios just tap it and it will automatically update your ipod. If you're trying to restore your ipod (as it's not quite clear in your query) try doing it through itunes instead of on the device itself
-
I tried to update to IPad 5.1, but when it finished and tried to restore the backup, it shows me that Itunes could not back up because a session could not be started with iPad. need your help please
This has happened to me a couple of times and what I do is quit iTunes and restart my Mac and then try again and then it will work.
If iTunes has already created the backup, you should still be able to restore from the backup when you are connected to iTunes. Right click on the iPad name on the left side of iTunes and select restore from backup. After the process completes, sync with iTunes to transfer all of your apps, music, photos and other media back onto the iPad. -
my ipad is locked after entring wrong pasword more than 10 times and i did not back up my ipad. now my device is not able be conncted with i tunes to restore or update, i need a help how can i unlock it?
You have to restore the iPad by syncing to the original computer that you synced to.
This article explains the process.
http://support.apple.com/kb/ht1212 -
hello .. i am using mavericks OS and it is showing it needs updates about 800 meg. and every time i download that it dosent do anything and again it is beginig to download again and again that.. please help me. the update is 10.9.2
To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.
Maybe you are looking for
-
Post Goods issue using bapi_goodsmvt_create
hi, Iam trying to do post goods issue using bapi_goodsmvt_create. please let me know what are the mandatory fields to be passed?
-
Dynamically populating a PDF form?
I've created a form in InDesign that I use in my daily work -- it has several fields that hold information about issues I'm currently working on. This information comes from a proprietary in-house system that I have access to via JDBC, SQL, language
-
11.1: Sun Quad FastEthernet card hampers Solaris 11.1 to boot
Hi, running a Solaris 11 system on x86 with a working Sun Quad FastEthernet card (hme0 - hme3): root@mother:/home/p009929# modinfo -w -i 199 Id Loadaddr Size Info Rev Module Name 199 fffffffff895c000 6930 175 1 hme (Sun HME 10/100 Mb Ethernet) root@m
-
Can I set up folders to organise apps?
Can apps be organised in relevant folders?
-
Is there documentation on how to step by step set up iViews for BOXI 3.1? I am not SAP literate yet, so I am not sure what I am even looking for. The SAP Integration Kit says iView templates are part of the install...just don't know where or what e