HT4623 I phone 4s is stuck in restore on the connect to I tunes screen? Help
I phone 4S is stuck in restore on the connecto to I tunes screen? Help
OK... what happened when you connected it to iTunes?
Similar Messages
-
i pod touch is stuck 'verifying restore' for the last 8 hrs... help??
Try putting the iPod into DFU mode and restoring again:
http://www.iclarified.com/entry/index.php?enid=1034
If that still doesn't work, then the jailbreak may have cause a corruption which is now fatal; that's not uncommon with jailbroken devices. If that is indeed the case, your iPod may be irrecoverable and you'll be shopping for a new one.
Good luck. -
I tried to update my phone to the new system but i removed it from my cpmputer and now its stuck on the connect USB to itunes screen.....HELP
Hello the_generator2003,
It sounds like after having disconnected the iPhone physically during the update process, the phone appears to be stuck in recovery mode. If you have followed the onscreen image, and reconnected the device to your computer, then I would start by resetting the phone and trying again:
From: Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/ht1430
If the issue is not resolved, then try putting the unit into recovery mode again with this article:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thank you for using Apple Support Communities.
Cheers,
Sterling -
i have a classic that seems to be stuck in restore mode, the screen says "do not disconnect'' and i can't restore using itunes. i have tried resetting it and still no good, what can i do to fix this problem ?
Be good to know what the diagnostic results are.
I've also just run into an issue where I couldn't restore an iPod with a corrupt file system, and the "super fix" in that linked article wasn't working for me. I've run across a potentially useful workaround.
iPod Classic went on the fritz today just after syncing. Couldn't restore via iTunes, kept getting 1439 errors, Windows wouldn't format as FAT32, claimed the "Volume is too big for FAT32". Finally tracked down EaseUS Partition Master Home Edition (Free) and formatted as FAT32 with 128k clusters. The iPod is filling back up again. Might be worth a shot here...
tt2 -
I have restored my i phone 4 and trying to restore from the back, but it is asking for the password, but when I entered the Itunes password it is not accepting it, how can I restore the password?
Hello hskod,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting encrypted backups
http://support.apple.com/kb/TS5162
You can keep trying to restore the device from backup until you remember the password. If you're having trouble, try:
Leaving the password field blank
Your Apple ID password
Your computer account password, if you have one
Email passwords you may have used
Your Wi-Fi network password
Website passwords you may have used
A password for hard-disk encryption software, if you use it
Have a nice day,
Mario -
tried to upload i.o.s 6.0 to my i phone 4 but it said i need to connect to i tunes.....when i do it keeps on saying i tunes could not contact the software update??? help!
Ouch! If it didn't break you are very lucky.
Follow the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the iPod in iTunes and choose "restore from backup".
If you still can't get it to work, you have done all you can and only Apple will be able to help. -
Changed phone carriers today. My 4s gives message "SIM Not Valid". Former carrier says phone is unlocked. New carrier says new connection successfully ported across. Help!
Reset your network settings
remove your sim and insert it back in
switch it off and try it again
If none of these work i suggest you call up your network operator -
my iPhone 6 is "stuck" mid restore. cannot access anything. phone screen indicates I need to connect to iTunes. when I connect, I tunes tells me it cannot restore the device and gives several different error messages. any help resolving would be much appreciated.
I had the same thing happen to my phone, I called tech support and nothing they did could fix the device over the phone. I ended up having to bring it to a store to get fixed.
-
HT1766 my phone is stuck in the "connect to itunes" mode. HELP
I went to itunes and synced by phone, Then I tried to upgrade to the 5.0 . It said I didn't have enough memory space, so I tried to restore it, but now the phone is stuck in a mode that shows "connect to itunes" on phone screen.
1)Turn off iPhone – Hold down the Sleep/Wake button for a few seconds until the red slider appears, then slide the red slider. Ignore this step if your iPhone is already off.
2)Press and hold down the Home button for about 10 seconds until a yellow triangle with a text which says Please Connect to iTunes appears.
3)Plug the iPhone into Mac or Windows PC. Release the button if you haven’t.
3)Run and open iTunes if it’s not already opened yet.
4)iTunes will prompt a message that says iTunes has detected an iPhone in recovery mode. Click OK.
You will be taken to the iPhone pane. Then, click on Restore
try this it should factory reset your iphone even if it is stuck in connect to itunes -
TS1591 My Iphone is stuck on the connect to Itune black screen notice, Please help
Please help, My IPHONE is stuck on the connect to ITune logo
My iTunes froze? What version is it installed in your PC?
-
i locked myself out of my ipod and i tryed unlocking it and then the "ipod is disabled" remark shoowed up. I knew what to do to restores it but in the last one minute of restoring a message popped up and said something about it cant finish it and the connectioned timed out. I tried this at my buddies house and it did the same. Ieven my freind (whos very good in electronics and computers) couldnt do it, i need help is there anyway possible?
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete. -
Phone is not functioning and is stuck on accessing network since I tried to upgrade to iOS7.
Try a reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)
-
My iPhone is stuck in restore mode - waiting for iPhone prompt... help!
My iPhone randomly crashed, and when I plug it in it says "device in recovery mode, restore and update." So I do, but then it extracts software of the phone and goes to a "waiting for iPhone" prompt for hours. Can someone please help me....
Double click home button to show recently opened apps bar, slide to right, unlock portrait orientation lock on left.
-
before i would just plug the phone into the desktop and it automaticaly conected i could add music and photos from the computor, now it seems to conect because it updates anything i have added thru the apple store while not conected but not fome the computer maybe i turned somthing off ?
Hi there howard124,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W. -
My iphone is locked. its says iphone diasabled connect to itunes.. what do i need to do from here..?
Open iTunes on computer, connect iPhone to computer with USB Cable, Restore iPhone.
Maybe you are looking for
-
Hard drive not mounting or being recognized by my MacBook???
Hello, I have a Glyph external hard drive that, all of a sudden, is no longer being recognized by my computer. I does not show up in the system profiler nor in disk utility. It connects using firewire. I have connected my digital camera via firewire
-
IPhoto 7.1.3: Can view and enlarge photos but cannot see them in edit mode
When selecting and attempting to edit photos, the photo does not appear in the "edit" window below the thumbnails. This "edit" window remains blank. Edit functions appear operable but I cannot see what is happening to the photo until the edit has bee
-
Device package error for switch Cat2960
Hi,, We are installing device package for switch Cat2960. But we get below error message when trying to install the same. WARNING : Cat2960(6.1):Consistency check failed for base package SharedDcmaIOS When trying to updgrade the SharedDcmaIOS to hig
-
Combining two Apple IDs into a single account
I couldn't find what other forum to post this question in. Please direct me to one if there is one. Thanks. I've accidentally created two Apple IDs and registered various hardware on each. I want to combine the two accounts into one. How can I do tha
-
Officejet pro 8500a power saving mode
My Officejet Pro 8500a goes into power saving mode too soon and too frequently. Is it possible to turn this feature, power saving mode, off?