HT4623 i pressed update on my iphone4 and now the apple icon just comes on and off every 10 secs and i cant turn on my phone. please help me..
i pressed update on my iphone4 and now the apple icon just comes on and off every 10 secs and i cant turn on my phone. please help me..
Hello dagobertofromelsalvador,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Best of luck,
Mario
Similar Messages
-
I pressed the find my iphone delete button and then my phone showed the apply logo. I then got worried and turned it straight off and now it will not turn back on. The apple logo just comes up for about 10 seconds and it goes back off.
Connect your phone to itunes on the computer you use itunes on and open up itunes.
-
My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!
Hello chindeepchow,
Thank you for using Apple Support Communities.
For more information, take a look at:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694#3000
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
Have a nice day,
Mario -
So just like last time I tried to update my iPhone software...MY PHONE IS FROZEN. Displaying iTunes icon and a USB cable I pressed the Power button and the menu botton together until the apple icon appeared held them down for 10 secs & NOTHING Now what? Do I just wait for the battery to run out?
Hi Careesa,
Your iPhone is in recovery mode-- you need to connect it to your computer and, most likely, iTunes will ask you to restore it. If you recently backed up this shouldn't be too much of a problem. -
what is error (16) during updating i phone5?and I cant turn it on? Please HELP...!
Serial No.F2******TWD
IMEI/MEID *****
iPhone 5 16GB
Model A1429
<Edited By Host>See this support document Resolve iOS update and restore errors - Apple Support, but an error 16 is usually a hardware error. I will also ask the hosts to edit your personal information about the phone. You should not post this on a public forum.
-
I just downloaded 5.2 and both my Apple TV shows and movies won't come up. Hulu and Netflix works fine, but when I go to select a purchased move or show through the apple menu, spiral comes up for about 10 seconds and then brings me back to the main page
StagLemoore wrote:
Thank you everyone for your suggestions and help. Ended up logging out of my apple ID account. Of note, when I did I did a quick test and checked out both the movies and tv show options, and it all worked perfectly. I then logged back in, and now all my purchased and rentals are available which makes sense. I guess with the update there was some weird bit of trons that required one to log out then back in. Probably doing a rest in between may not hurt for some. Thanks again for all the assistance. Cheers.
It looks like there is a Apple doc for this problem here -> Apple TV: Unable to access Movies, TV Shows, or other iTunes features after updating -
I accidentally quit my CC on my Macbook pro and now the cloud icon is grayed out and every time I hover over it with the mouse I get the spinning beach ball of death on the icon. I have no idea how to open it because when I use spotlight search to open it it gives me a message saying "Creative Cloud is not open anymore" help!
Since you didn't include any pertinent info such as the Mac model and OS version you are running, here is some general information:
Mac OS X: Gray screen appears during startup
Depending on which OS yours came with originally - and which OS you are now running - you would either need your original install disks - you can call Apple for replacements by giving them your serial number. Or you may be able to reinstall the OS by using recovery (again, depends on which model/which OS). -
I have 2 iphones on one itunes account. I just upgraded both to ios 8 and now the messages i receive come through to both phones when they used to be separated. What is going on here?
I noticed the same problem after upgrading a few iPhones to IOS 8, all use the same Apple ID. However, I now notice when I go into Message and instead of selecting a person from my contact list, I start typing their name which brings up a list of people, some of which are not in my contact list and are on one of the other iPhones. There's a circle/exclamation point next to the name which I click on, and one of the options is to "Remove from Recent". How did these names get from one phone to another and how do I remove all "recents"? They do not appear in my contact list. Anyone see this?
-
how can I find what the charges aree to my credit card from the apple store? I get multiple charges every month and don't know what they are for...I want to cancel whatever is being charged to me...how do I do it?
Have a look at this link
http://support.apple.com/kb/ht2727 -
Have an iPod touch 4th gen. It is completely charged, but once I disconnect from a power source it shuts down and then the apple logo just keeps reappearing. I have restored via iTunes and reset all the settings. Any suggestions?
If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
Recently i upgrade my iPad2 to 7.1(11D167) and now the wifi connection is very weak, I am not sure if it is a hardware or software issue, help please!
I am not sure, I have full signal on my iphone 5 and just 1 dot on my ipad, tomorrow I will test connection with other router and network, I thank you for your help and I will tell you the test result when done
-
I have clicked on to a app and now my apple store app is Spanish andi don't know how to change it back can any one help me?
Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3.Tap "View Apple ID"
4. Enter your user name and password.
5. Tap "Country/Region."
6. Tap "Change Country/Region"
7. Select the region where you are located.
8. Tap "Done". -
although it is doing what i asked it to do, i want it to charge, ok so it does it... although when i turn it on it's as if it's either not charged at all but only enough to have the apple icon on my ipod, once it's had enough (which is like, a minute) it switches itself off and carries on charging, sometimes it switches itself on but this just takes it back to step one. also, when i connect my device to the USB port itunes does not recognise it for some reason, i've updated the newest version of itunes recently and i've tried annother ipod on annother computer with the same USB cable, so it's either the newest version of itunes, my ipod or my computer. please help
P.S,
i do have the required version of windows for this to work, my computer isn't a mac, it's a pc, hope this helps...how long have you had your ipod? mine did the same but after a while you need to get a new one because of the battery...
-
After upgrading to OSX Maverick my Apple TV has taken control of my iTunes videos insisting I have to watch it on my TV. I have tried disabling home sharing on iTunes and on the Apple TV menu, I have also checked the disable Infrared facility in Systems Prefs Security. Even if I put the Apple TV in standby as soon as I hit a key on my iMac, Apple TV comes back on and on my Itunes screen I get the Apple TV logo imprinted on the screen, meaning I can no longer watch it on my MAC, I have run out of ideas. Can anyone help.
I think you're headed the right direction. There is an AirPlay icon (on mine it is up near the play/pause controls) that I believe is used to set the default desitination for the video to play.
I'd never seen your issue before, but opened iTunes on a recently-upgraded-to-Mavericks MacBook and it did exactly as you described. While the video was loading, I switched the AirPlay option to the computer instead of ATV and it began playing locally (after a delay as you'd mentioned). I then read this page, which is actually quite old: http://forums.macrumors.com/showthread.php?t=1091073, which lead me to the icon near the play/pause button. It now has Computer selected on it, and defaults to play locally instead of the ATV even after quitting and reopening iTunes. I hope that is helpful. -
I have unplug and plugged in my iPod to my pc 100 times and admin never comes up. When i go to iTunes I don't see anyway to
get to the iPod admin. I copied quite a few of my CD's into iTunes but can't find a way to sync the player with the itunes on my computer.
I don't like the new update...it changed the look and feel of everything...for the worse.Many people haven't yet figured out the new default interface in iTunes 11 but it's not that difficult. To get to the iPod information so you can sync, click the iPod button in the header bar at the upper-right, e.g.:
Or go to the View menu and select "Show Sidebar" and the interface will then look substantially like it did in earlier versions. If you are running Windows and don't see the menus, press Control-B or go to the small icon with the arrow at the extreme upper left and select "Show Menu Bar":
Regards.
Maybe you are looking for
-
Hi, this is the 3rd time that my iMac gets slower and slower until it freezes. When I force-restart and try fsck -f, disk repair stops with "I/0 error; invalid sibling link". It can't start up again, resp. it quits startup and reboots endlessly. I st
-
Can we have two document types in SAP_SRM5.0?
Hi All, Can we have two document types in SAP_SRM5.0? The doc type EC is configured for EC-PR and PO , But now we need to rollout buyers intervenes if sc< 5000K, should generate the PO directly for non-catalog. For instance; 1. Existing scenario,
-
How to install oracle 8i Enterprise on windows2000 prosfessional ?
I installed Oracle8i Enterprise in Windows 2000 Advanced Server,but failed to install it in windows 2000 professional. These are the phenomenas: 1. When I insert the CD into CD-ROM , it pop up a window which let me to install Oracle 8i . 2. When I cl
-
Tiger installation doesn't start after restart
I'm trying to install Tiger using the dvd and after i double click the icon, it asks me to restart.. so i click restart and upon restart, nothing happens. All it does is restart my computer. I have all the proper specs necessary and went through the
-
Content translation depending on the location
Hi I have got a requirement.When a user enters into the portal through internet, i want to change the entire content of the portal depending upon the location. And also the Portal Admin Should get the location of the entered user i.e; when a user ent