HT4623 i tried to update my phone to new software and there is no button that says software update so now what do i need to do?
I have tried to update my iphone 3g with new software and i cant do it. i need help. i cant find the software and i cant do it thru my itunes or my phone
You update the iOS using iTunes
If you have an iPhone 3G you can only update to 4.2.1
if you have an iPhone 3GS you can update to 6.1.3
http://support.apple.com/kb/HT4623
Similar Messages
-
I upgraded to an Iphone 5 and open new Icloud account, I then backed up my phone on my brothers Mac Pro, I now want to restore my info to my phone and I get a message that says not enough space. What do I do
Delete all back ups on MacBook and create new back up. Restart his MB and attempt to restore again. Do not forget to erase your iphone 5 before restore.
-
i have an iphone, imac and 2 ipod touches 5th generation. I just purchased some apps and songs on the ipad with hopes they would transfer to all the other devices. some of them did go to all devices while others did not. when i go to purchases on one of the ipods they show up as not purchaced (even though they may be on 2 of the other devices). my iphone has them there, but it says waiting to download. its been a day and they are still waiting to download. I've checked settings on all and they are set to automatically download and all devices share the same apple id. not sure what ive done wrong and have tried several things. hopefully i haven't confused you too much.
My problem was that Software Update didn't check for updates every day, and maybe never...
Finally I found that: http://hints.macworld.com/article.php?story=20120824124203635
Basically all you have to do is open the Terminal and type:
sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate.plist ScheduleFrequency 1
The number, 1 in this case, means the frequency which Software Update is going to check for updates, so 1 means every day.
If this doesn't work you can try two things (or both, but in this order)
- Go to /Library/Preferences/ and delete the file: com.apple.SoftwareUpdate.plist, then open Software Update... to create a new file, and go to System Preferences to configure it again. Finally open the Terminal and try the command at the beginning of this comment.
- If Software Update continues without checking for updates every day, open the file: com.apple.SoftwareUpdate.plist and you will see a preference that is: ScheduleFrequency with the number 1 at its right and you will see that the type is String, copy the file to the Desktop (for example) and change the type String to Number, then drag the file in the Desktop into the Preferences folder and replace the first. It will work. (For this part you will need Xcode) -
its the same shit i asked before after i download the browser i get message can not open file what do i do to dwonload the browser
That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2 -
How does FIREFOX-TOOLBAR looks like,and where on my page will I see it? I have a lot of toolbars on my page, like, the ZYNGA-toolbar,facemoods, ect..... Before I downloaded the "new version of firefox 4, I had the version 3.16, and had NO trouble at all!
I would imagine it's the MyWay Searchbar which is classified by most anti-malware scanners as adware, or even worse as spyware. I say that because I see "SmileyCentral" in your list of plugins and that's an add-on for that particular toolbar. You can disable that via Tools | Add-ons | Plugins.
There are a number of toolbars which won't work with Firefox 4 anymore due to the enhanced protection mechanisms in the browser.
Mozilla recommends that you only install add-ons from its own security site @ https://addons.mozilla.org/en-US/firefox/?browse=featured Generally speaking, those have all been tested and approved. The exceptions are those currently under review which are marked with a yellow banner to warn users that they haven't passed Mozilla's labs yet. -
HT4623 I tried to update my phone and it is frozen now. It won't do anything.
I connected my phone to iTunes on my computer and tried to update. Now my phone won't work and it is stuck on a screen that shows a usb cord and says iTunes.
Your phone is in recovery mode. You need to restore it.
-
I'm trying to sync my phone to my computer and keep getting error message "1140" just when it's about to finish. My updates are current. Thoughts?
Hi hannijin,
What version of the Mac OS X do you have on your computer? The version of iTunes that you can install is dependent on the operating system that you have. For example, the current version of iTunes requires OS X version 10.7.5 or later.
Finding the OS X version and build information on your Mac - Apple Support
https://support.apple.com/en-us/HT201260
Apple - OS X Yosemite - How to Upgrade
https://www.apple.com/osx/how-to-upgrade/
Hope that helps ...
- Judy -
I am trying to install an update of Microsoft office and I get a message that says. This application must be closed ETC..... I am running Parralell and I think it is there. The two programs are "Microsoft Database Daemon" "SyncServicesAgent". How do I close these programs?
If the Office updates have to be run through Win in Parallels, there's not really a section here that covers that , because Neither Office or Parallels are Apple products. There is only a small chance that you'll find someone with BOTH your conditions who just happend to look into a forum on older iMacs.
Parallels has a forum here:
http://forum.parallels.com/forum.php
I think you'll get a faster response there. -
TS3694 just got a 3004 error while trying to update iphone version, what should I do
juat got 3004 while trying to update iphone version, what should I do?
error 3014 is this
Error 3014
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below inUnable to contact the iOS software update server gs.apple.com.
If you have jailbroken you will get no support here. It is against the terms of use of this forum to discuss jailbreaking -
I have 8 apps that, when I tried to update, are now stuck on "installing" in the box that says update. every time I try to update another app, it gets frozen like this as well. I was able to quit all apps, but these, as they do not respond. Any ideas?
Reset your iPad by holding the home and on/off buttons together for 6 or 7 seconds till the Apple logo appears. Then update your apps one at a time. Do not start the next app until the current one downloads and finishes installing.
-
I have a new computer and a old iphone 4 that hasn't been updated in a long time. I logged into itunes on my new computer and plugged in my phone and there is no option to sync. ;( suggestions?
The ipod is not a backup device. The music sync is one way - computer to ipod. the exception is itunes purchases. Without syncing: File>Transfer Purchases
Copy everything from your old computer, or your backup copy of your old comptuer, to your new one. -
I updated the Itunes on my computer and it begin having problems. I tryed a new installation and there is a message saying an application has made an attempt to load C runtime library incorrectly. What shoul I do?
Hello rvalle3,
The following article can help get iTunes updated and running again.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen -
I updated my Ipod touch 4th gen (IO6 or whatever its called) And it has the picture that says to connect my ipod to Itunes, and I did, now it says "ITunes has detected an Ipod in recovery mode. You must restore this Ipod before it can be used with ITunes." I just updated it and now I have to restore it??! I don't wanna lose all my things on my ipod just for a stupid update! Please someone help!
Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download -
HT4623 I don't have a button that says 'system update' how do I download the latest software?
I dint have a button that says system update so I am still using the software from when iPad 2 first came out. Can anyone help?
The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases (File > Devices > Transfer Purchases on iTunes 11). You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes (on iTunes 11 you can enable the left-hand sidebar via option-command-S on a Mac, control-S on a PC), and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
Your iPad will be updated to iOS 6.1 (which is the only version that is 'signed' by Apple for it). -
i am trying to get my apps on my iphone and when i click sync it says backing up files and it takes hours for it to go up but it says can't finish back up wat do i do
dplum12
What computer operating system is your Premiere Elements 12 running on? Did you have the opportunity to update 12 to 12.1 Update yet using an opened project's Help Menu/Update? If not, please do so when you get the opportunity.
For now I will assume that your computer is Windows 7, 8, or 8.1 64 bit. Please try the following suggestions to overcome your Premiere Elements Sign In issue.
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
and, if you get any messages about Internet connect and the computer clock, please review the following
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
Please let us know the outcome.
Thank you.
ATR
Maybe you are looking for
-
Keyboard-lock of swing program on Linux box
We are developing swing program on Linux, and we often meet keyboard-lock issues. I try to simplify some of them to small programs, and still meet keyboard-lock. Here I post two programs to show the error: //---first ---------------------------------
-
hi, following maxl script is for ASO alter database APP.DB clear data in region '{CrossJoin({StrTOMbr(&CURMONTH)},{EOP,ABC})}'physical; above script working if CURMONTH="jan" but , If CURMONTH= "jan","feb" "mar" then its giving error. any advice
-
hello, i have a question about infoset. i have a infoset which has 3 objects 2 infoobjetcs and one dso. they all say left outer join and i know left out join means the value in the left object has to be in the right ones. how do i read this infoset?
-
LYNC Server 2013 LS User Services error with event ID 32190
Hi, I found below error in my front end server, please help to advise how to solve it. thanks Store procedure to replicate data from primary frontend to secondary frontend failed. Error Details: [# [Microsoft][SQL Server Native Client 11.0][SQL Se
-
Problem importing photos from card reader
I have been successfully importing photos from my camera's memory card using a card reader. I was half way through a similar import, when a pop up came up on screen to say I was running out of disc space. So I deleted some other files to make room an